Mori-Seiki/DMG Pull Stud


Pull Studs for DMG Mori NVX Machines Series

 

DOWNLOAD FLYER

CAT40

Lyndex-Nikken Part #: C40-1500-MORI

Mori-Seiki/DMG Part #: N29105

Download CAD drawing

  • Class 3A UNC Thread
  • Magnetic particle crack tested
  • Tensile and shear requirements per ISO and JIS standard
  • All locations that make contact with ground spindle mechanism components are ground
  • Base of pullstud flange is ground to assure perpendicular alignment between pull stud and taper of toolholder
  • Tight pitch diameter tolerance helps maintain accurate concentricity between threads and knob limiting the expansion or flaring of the small end of the taper 

BT40

Lyndex-Nikken Part #: B40-1500-MORI

Mori-Seiki/DMG Part #: N29104

Download CAD drawing

  • Class 4g6g metric thread
  • Magnetic particle crack tested
  • Tensile and shear requirements per JIS 6339
  • All locations of the pull stud that make contact with ground spindle mechanism components are ground
  • Base of pull stud flange is ground to assure perpendicular alignment between pull stud and taper of toolholder
  • Ground Pilot and tight pitch diameter tolerance help maintain accurate concentricity between threads and knob limiting the expansion or flaring of the small end of the taper


Live Tool Core
Buy-Back Program