Overstock products on this list is updated every 30 minutes, so the products or quantities available at time of inquiry may be different. Overstock products are available only while supplies last, offer cannot be combined with any other promotion or discount, we reserve the right to make changes to the list of products at any time, and all sales are final so act fast! Contact your local distributor and remember to tell them your promotion code. If you don’t have one, ask them about the 20% savings.
| Part Number | NERP Item Description | Retail | Wh1 QOH | Weight | Length | Width | Depth | Product Category |
|---|---|---|---|---|---|---|---|---|
| 010-022 | DA100 Collet 11/32" | 25.0 | 17.0 | 0.14 | 2.00 | 1.25 | 1.25 | DA Collets |
| 025-003 | TG25 Collet 3/64" | 76.0 | 2.0 | 0.02 | 2.00 | 1.25 | 1.25 | TG Collets |
| 025-004 | TG25 Collet 1/16" | 76.0 | 21.0 | 0.02 | 2.00 | 1.25 | 1.25 | TG Collets |
| 025-005 | TG25 Collet 5/64" | 76.0 | 12.0 | 0.02 | 2.00 | 1.25 | 1.25 | TG Collets |
| 025-006 | TG25 Collet 3/32" | 76.0 | 12.0 | 0.02 | 2.00 | 1.25 | 1.25 | TG Collets |
| 025-007 | TG25 Collet 7/64" | 76.0 | 21.0 | 0.02 | 2.00 | 1.25 | 1.25 | TG Collets |
| 025-009 | TG25 Collet 9/64" | 63.0 | 8.0 | 0.02 | 2.00 | 1.25 | 1.25 | TG Collets |
| 025-010 | TG25 Collet 5/32" | 63.0 | 5.0 | 0.02 | 2.00 | 1.25 | 1.25 | TG Collets |
| 025-011 | TG25 Collet 11/64" | 63.0 | 19.0 | 0.02 | 2.00 | 1.25 | 1.25 | TG Collets |
| 025-013 | TG25 Collet 13/64" | 63.0 | 18.0 | 0.02 | 2.00 | 1.25 | 1.25 | TG Collets |
| 025-014 | TG25 Collet 7/32" | 54.0 | 2.0 | 0.02 | 2.00 | 1.25 | 1.25 | TG Collets |
| 025-015 | TG25 Collet 15/64" | 63.0 | 15.0 | 0.02 | 2.00 | 1.25 | 1.25 | TG Collets |
| 025-016 | TG25 Collet 1/4" | 63.0 | 16.0 | 0.02 | 2.00 | 1.25 | 1.25 | TG Collets |
| 05.0311.1732.404 | Sauter VDI30 Live ER25 X<Radial>STRT ExtCool | 3680.0 | 1.0 | 4.50 | 9.75 | 5.00 | 3.43 | Sauter |
| 05.0311.4240.505 | Duplomatic VDI40 Live ER32 Z<Axial>STRT | 0.0 | 1.0 | 8.65 | 8.25 | 6.25 | 4.56 | Sauter |
| 05.0611.7089.MI40 | Nakamura Live MI40 X<Radial>STRT IntExtCoolant7MP | 0.0 | 1.0 | 7.60 | 9.75 | 5.25 | 4.50 | Nakamura |
| 05.1311.1732.404 | Sauter VDI30 Live ER25 Z<Axial>90D ExtCool | 3680.0 | 1.0 | 8.80 | 3.25 | 5.00 | 9.75 | Sauter |
| 05.1611.7089.MI40 | Nakamura Live MI40 Z<Axial>90D IntExtCoolant7MP | 0.0 | 1.0 | 11.60 | 9.75 | 7.81 | 4.68 | Nakamura |
| 050-008 | TG50 Collet 1/8" | 190.0 | 2.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-009 | TG50 Collet 9/64" | 190.0 | 41.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-010 | TG50 Collet 5/32" | 190.0 | 2.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-011 | TG50 Collet 11/64" | 190.0 | 23.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-015 | TG50 Collet 15/64" | 190.0 | 25.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-017 | TG50 Collet 17/64" | 190.0 | 14.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-019 | TG50 Collet 19/64" | 190.0 | 31.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-021 | TG50 Collet 21/64" | 190.0 | 15.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-023 | TG50 Collet 23/64" | 190.0 | 7.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-026 | TG50 Collet 13/32" | 190.0 | 12.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-027 | TG50 Collet 27/64" | 190.0 | 84.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-028 | TG50 Collet 7/16" | 190.0 | 6.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-029 | TG50 Collet 29/64" | 190.0 | 28.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-030 | TG50 Collet 15/32" | 190.0 | 58.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 050-031 | TG50 Collet 31/64" | 190.0 | 34.0 | 0.10 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-003 | TG75 Collet 3/64" | 30.0 | 17.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-006 | TG75 Collet 3/32" | 30.0 | 11.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-018(S) | TG75 Collet 9/32" Coolant Rubber Seal | 55.0 | 1.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-019 | TG75 Collet 19/64" | 30.0 | 32.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-021 | TG75 Collet 21/64" | 30.0 | 13.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-022(S) | TG75 Collet 11/32" Coolant Rubber Seal | 55.0 | 1.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-026(C) | TG75 Collet 13/32" Mechanical Coolant Seal | 205.0 | 10.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-027 | TG75 Collet 27/64" | 30.0 | 45.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-029 | TG75 Collet 29/64" | 30.0 | 57.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-030(C) | TG75 Collet 15/32" Mechanical Coolant Seal | 205.0 | 4.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-033 | TG75 Collet 33/64" | 30.0 | 8.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-033(C) | TG75 Collet 33/64" Mechanical Coolant Seal | 205.0 | 6.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-033(S) | TG75 Collet 33/64" Coolant Rubber Seal | 55.0 | 1.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-034 | TG75 Collet 17/32" | 30.0 | 20.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-035 | TG75 Collet 35/64" | 30.0 | 56.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-035(S) | TG75 Collet 35/64" Coolant Rubber Seal | 55.0 | 3.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-036(S) | TG75 Collet 9/16" Coolant Rubber Seal | 55.0 | 5.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-037 | TG75 Collet 37/64" | 30.0 | 36.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-038 | TG75 Collet 19/32" | 30.0 | 33.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-041 | TG75 Collet 41/64" | 30.0 | 43.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-042 | TG75 Collet 21/32" | 30.0 | 10.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-043 | TG75 Collet 43/64" | 30.0 | 34.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-044(S) | TG75 Collet 11/16" Coolant Rubber Seal | 51.0 | 1.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-045 | TG75 Collet 45/64" | 30.0 | 44.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-046 | TG75 Collet 23/32" | 30.0 | 10.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-046(S) | TG75 Collet 23/32" Coolant Rubber Seal | 55.0 | 4.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 075-047 | TG75 Collet 47/64" | 30.0 | 36.0 | 0.30 | 2.00 | 1.25 | 1.25 | TG Collets |
| 100-004 | TG100 Collet 1/16" | 36.0 | 16.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-022(S) | TG100 Collet 11/32" Coolant Rubber Seal | 62.0 | 1.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-029(S) | TG100 Collet 29/64" Coolant Rubber Seal | 62.0 | 2.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-037(S) | TG100 Collet 37/64" Coolant Rubber Seal | 62.0 | 1.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-038(S) | TG100 Collet 19/32" Coolant Rubber Seal | 62.0 | 1.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-039(S) | TG100 Collet 39/64" Coolant Rubber Seal | 62.0 | 12.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-045(S) | TG100 Collet 45/64" Coolant Rubber Seal | 62.0 | 11.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-047(S) | TG100 Collet 47/64" Coolant Rubber Seal | 62.0 | 1.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-049(S) | TG100 Collet 49/64" Coolant Rubber Seal | 62.0 | 11.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-051(S) | TG100 Collet 51/64" Coolant Rubber Seal | 62.0 | 3.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-052(S) | TG100 Collet 13/16" Coolant Rubber Seal | 62.0 | 12.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-054(S) | TG100 Collet 27/32" Coolant Rubber Seal | 62.0 | 2.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-055(C) | TG100 Collet 55/64" Mechanical Coolant Seal | 205.0 | 10.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-055(S) | TG100 Collet 55/64" Coolant Rubber Seal | 62.0 | 4.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-057(S) | TG100 Collet 57/64" Coolant Rubber Seal | 62.0 | 3.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-059(S) | TG100 Collet 59/64" Coolant Rubber Seal | 62.0 | 2.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-060(S) | TG100 Collet 15/16" Coolant Rubber Seal | 62.0 | 2.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-062(S) | TG100 Collet 31/32" Coolant Rubber Seal | 62.0 | 4.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-205.5 | TG100 Collet 5.5mm | 36.0 | 16.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-207.75 | TG100 Collet 7.75mm | 36.0 | 9.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-211.5 | TG100 Collet 11.5mm | 36.0 | 3.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-219 | TG100 Collet 19mm | 36.0 | 11.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-222(S) | TG100 Collet 22mm Coolant Rubber Seal | 62.0 | 18.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-224(S) | TG100 Collet 24mm Coolant Rubber Seal | 62.0 | 10.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-226(S) | TG100 Collet 26mm Coolant Rubber Seal | 62.0 | 9.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-324 | TG100 Collet 3/8NPIn | 63.0 | 38.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-340 | TG100 Collet 5/8NPIn | 63.0 | 48.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-348 | TG100 Collet 3/4NPIn | 63.0 | 11.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100-364 | TG100 Collet 1NP | 63.0 | 4.0 | 0.60 | 3.00 | 1.50 | 1.50 | TG Collets |
| 100DA-RACK | Rack DA100 21 Capacity Metal | 94.0 | 2.0 | 2.03 | 11.25 | 7.50 | 2.00 | Accessories |
| 100-KIT | 1" Straight Shank EXT DA100 | 810.0 | 2.0 | 6.80 | 12.00 | 9.25 | 5.50 | DA Collet Chucks |
| 1-2-3 | 1-2-3 Block Set / Height Setter | 116.0 | 212.0 | 2.00 | 2.25 | 2.25 | 3.37 | Height Setters |
| 13-13 | YCC13 Collet 12-13mm | 130.0 | 18.0 | 0.10 | 1.86 | 1.86 | 2.00 | YCC |
| 150-032 | TG150 Collet 1/2" | 83.0 | 5.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-033 | TG150 Collet 33/64" | 83.0 | 30.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-034 | TG150 Collet 17/32" | 83.0 | 21.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-035 | TG150 Collet 35/64" | 83.0 | 27.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-037 | TG150 Collet 37/64" | 83.0 | 22.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-038 | TG150 Collet 19/32" | 83.0 | 28.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-039 | TG150 Collet 39/64" | 83.0 | 12.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-041 | TG150 Collet 41/64" | 83.0 | 25.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-042 | TG150 Collet 21/32" | 83.0 | 24.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-043 | TG150 Collet 43/64" | 83.0 | 14.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-044 | TG150 Collet 11/16" | 83.0 | 11.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-045 | TG150 Collet 45/64" | 83.0 | 7.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-046 | TG150 Collet 23/32" | 83.0 | 6.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-047 | TG150 Collet 47/64" | 83.0 | 9.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-048 | TG150 Collet 3/4" | 62.0 | 29.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-049 | TG150 Collet 49/64" | 62.0 | 2.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-050 | TG150 Collet 25/32" | 62.0 | 22.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-051 | TG150 Collet 51/64" | 62.0 | 2.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-052 | TG150 Collet 13/16" | 62.0 | 19.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-053 | TG150 Collet 53/64" | 62.0 | 12.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-054 | TG150 Collet 27/32" | 62.0 | 13.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-055 | TG150 Collet 55/64" | 62.0 | 15.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-057 | TG150 Collet 57/64" | 62.0 | 3.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-058 | TG150 Collet 29/32" | 62.0 | 18.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-059 | TG150 Collet 59/64" | 62.0 | 15.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-060 | TG150 Collet 15/16" | 62.0 | 24.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-061 | TG150 Collet 61/64" | 62.0 | 10.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-062 | TG150 Collet 31/32" | 62.0 | 23.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-063 | TG150 Collet 63/64" | 62.0 | 7.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-065 | TG150 Collet 1.1/64" | 62.0 | 29.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-066 | TG150 Collet 1.1/32" | 62.0 | 8.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-067 | TG150 Collet 1.3/64" | 62.0 | 26.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-068 | TG150 Collet 1.1/16" | 62.0 | 7.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-069 | TG150 Collet 1.5/64" | 62.0 | 9.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-070 | TG150 Collet 1.3/32" | 62.0 | 28.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-071 | TG150 Collet 1.7/64" | 62.0 | 10.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-072 | TG150 Collet 1.1/8" | 62.0 | 5.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-073 | TG150 Collet 1.9/64" | 62.0 | 13.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-074 | TG150 Collet 1.5/32" | 62.0 | 19.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-075 | TG150 Collet 1.11/64" | 62.0 | 7.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-076 | TG150 Collet 1.3/16" | 62.0 | 3.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-077 | TG150 Collet 1.13/64" | 62.0 | 12.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-078 | TG150 Collet 1.7/32" | 62.0 | 13.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-079 | TG150 Collet 1.15/64" | 62.0 | 1.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-081 | TG150 Collet 1.17/64" | 62.0 | 10.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-082 | TG150 Collet 1.9/32" | 62.0 | 8.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-083 | TG150 Collet 1.19/64" | 62.0 | 19.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-084 | TG150 Collet 1.5/16" | 62.0 | 37.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-085 | TG150 Collet 1.21/64" | 62.0 | 12.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-086 | TG150 Collet 1.11/32" | 62.0 | 29.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-087 | TG150 Collet 1.23/64" | 62.0 | 22.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-088 | TG150 Collet 1.3/8" | 62.0 | 21.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-089 | TG150 Collet 1.25/64" | 62.0 | 10.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-090 | TG150 Collet 1.13/32" | 62.0 | 25.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-091 | TG150 Collet 1.27/64" | 62.0 | 29.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-092 | TG150 Collet 1.7/16" | 62.0 | 2.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-093 | TG150 Collet 1.29/64" | 62.0 | 29.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-094 | TG150 Collet 1.15/32" | 62.0 | 7.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-095 | TG150 Collet 1.31/64" | 62.0 | 8.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-332 | TG150 Collet 1/2" NP | 90.0 | 6.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-340 | TG150 Collet 5/8" NP | 90.0 | 5.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 150-364 | TG150 Collet 1 NP | 90.0 | 15.0 | 1.46 | 3.50 | 2.25 | 2.25 | TG Collets |
| 16-12 | YCC16 Collet 11-12mm | 152.0 | 2.0 | 0.15 | 1.37 | 1.37 | 2.00 | YCC |
| 16-4 | YCC16 Collet 3.5-4mm | 158.0 | 5.0 | 0.15 | 1.86 | 1.86 | 2.00 | YCC |
| 164-008 | 16C Square Collet Inch 1/8" | 113.0 | 27.0 | 1.98 | 4.75 | 2.25 | 2.25 | 16C Collets |
| 164-060 | 16C Square Collet Inch 15/16" | 113.0 | 11.0 | 1.62 | 4.75 | 2.25 | 2.25 | 16C Collets |
| 20-10 | YCC20 9-10mm | 192.0 | 1.0 | 0.45 | 1.37 | 1.37 | 2.00 | YCC |
| 20-20 | YCC20 Collet 19-20mm | 157.0 | 1.0 | 0.25 | 1.37 | 1.37 | 2.00 | YCC |
| 20-9 | YCC20 Collet 8-9mm | 157.0 | 1.0 | 0.45 | 1.37 | 1.37 | 2.00 | YCC |
| 2500MC-SPAN | Spanner Wrench C2.1/2" Milling Chuck (120-130) | 43.0 | 34.0 | 1.70 | 13.00 | 3.50 | 0.50 | Wrenches |
| 300DA-RACK | Rack 300DA 21 Capacity Metal | 24.0 | 13.0 | 2.90 | 8.25 | 3.75 | 1.00 | Accessories |
| 30-LCFX | Tool Clamper CAT30, BT30, SK30, NMTB30 | 248.0 | 4.0 | 3.40 | 5.00 | 4.00 | 3.00 | Accessories |
| 340-020 | 3J Square Collet Inch 5/16" | 125.0 | 11.0 | 1.20 | 4.75 | 2.25 | 2.25 | 3J Collets |
| 340-044 | 3J Square Collet Inch 11/16" | 125.0 | 12.0 | 1.34 | 4.75 | 2.25 | 2.25 | 3J Collets |
| 340-052 | 3J Square Collet Inch 13/16" | 125.0 | 10.0 | 1.30 | 4.75 | 2.25 | 2.25 | 3J Collets |
| 340-056 | 3J Square Collet Inch 7/8" | 125.0 | 8.0 | 1.60 | 4.75 | 2.25 | 2.25 | 3J Collets |
| 35-LCFX | Tool Clamper CAT35, BT35, SK35 | 312.0 | 14.0 | 3.85 | 5.00 | 4.00 | 3.00 | Accessories |
| 45-LCFX | Tool Clamper CAT45, BT45, SK45 | 312.0 | 14.0 | 7.85 | 7.00 | 4.50 | 3.50 | Accessories |
| 540-044 | 5C Square Collet Inch 11/16" | 67.0 | 34.0 | 0.50 | 4.00 | 1.50 | 1.50 | 5C Collets |
| A63KA-OC50.8-86S87L | Turning Tool Outside TYPE C | 1274.0 | 1.0 | 6.55 | 3.75 | 6.25 | 4.12 | Others |
| AC4-ECH20F-55 | PSC C4 ER32 Collet Chuck | 1059.0 | 1.0 | 1.05 | 3.74 | 2.36 | 2.36 | ER Collet Chucks |
| ATC/HSK63A-FLANGE | Flange for ATC Alignment Tool HSK63A | 591.0 | 6.0 | 3.00 | 0.00 | 0.00 | 0.00 | ATC Alignment Tools |
| B3002-0750-4.97 | BT30 Stub Mill Arbor 3/4" | 370.0 | 6.0 | 2.45 | 8.43 | 5.00 | 2.75 | Stub Mill Holders |
| B3003-0006-1.02 | BT30 JT6 Jacobs Drill Chuck Adapter | 270.0 | 4.0 | 1.10 | 6.75 | 3.00 | 3.00 | Jacobs Taper Adapter |
| B3004-0001-1.75 | BT30 Morse Taper MT1 Adapter | 230.0 | 10.0 | 1.05 | 6.75 | 3.00 | 3.00 | Morse Taper Adapters |
| B3004-0002-2.36 | BT30 Morse Taper MT2 Adapter | 230.0 | 11.0 | 1.20 | 6.75 | 3.00 | 3.00 | Morse Taper Adapters |
| B3006-0125-2.00B | BT30 End Mill Holder 1/8" Balanceable 24K | 284.0 | 3.0 | 1.00 | 6.75 | 3.00 | 3.00 | End Mill Holders |
| B3006-0250-2.00B | BT30 End Mill Holder 1/4" Balanceable 24K | 284.0 | 7.0 | 1.00 | 6.75 | 3.00 | 3.00 | End Mill Holders |
| B3006-0312B | BT30 End Mill Holder 5/16" Balanceable 24K | 284.0 | 7.0 | 1.20 | 6.75 | 3.00 | 3.00 | End Mill Holders |
| B3006-0375B | BT30 End Mill Holder 3/8" Balanceable 24K | 284.0 | 11.0 | 1.05 | 6.75 | 3.00 | 3.00 | End Mill Holders |
| B3006-0500-2.50B | BT30 End Mill Holder 1/2" Balanceable 24K | 284.0 | 20.0 | 1.40 | 6.75 | 3.00 | 3.00 | End Mill Holders |
| B3006-0625B | BT30 End Mill Holder 5/8" Balanceable 24K | 284.0 | 12.0 | 1.65 | 6.75 | 3.00 | 3.00 | End Mill Holders |
| B3006-10-2.50 | BT30 End Mill Holder 10mm 15K | 139.0 | 2.0 | 1.25 | 6.75 | 3.00 | 3.00 | End Mill Holders |
| B3006-14-2.50 | BT30 End Mill Holder 14mm 15K | 187.0 | 2.0 | 1.60 | 6.75 | 3.00 | 3.00 | End Mill Holders |
| B3007-0025B | BT30 ER25 Collet Chuck HiTorque BearingNut Balanceable 24K | 369.0 | 3.0 | 1.40 | 6.75 | 3.00 | 3.12 | ER Collet Chucks |
| B3007-0250-1.75 | BT30 TG25 Collet Chuck 18K | 191.0 | 1.0 | 1.00 | 6.75 | 3.00 | 3.00 | TG Collet Chucks |
| B3007-0250B | BT30 TG25 Collet Chuck Balanceable 24K | 364.0 | 4.0 | 1.05 | 6.75 | 3.00 | 3.00 | TG Collet Chucks |
| B3007-0750B | BT30 TG75 Collet Chuck Balanceable 24K | 364.0 | 2.0 | 1.75 | 6.75 | 3.00 | 3.00 | TG Collet Chucks |
| B3017-0016B | BT30 ER16 Collet Chuck HiTorque BearingNut Balanceable 24K | 454.0 | 11.0 | 1.20 | 7.25 | 3.00 | 3.00 | ER Collet Chucks |
| B3017-0250-4.00 | BT30 TG25 Collet Chuck 18K | 423.0 | 16.0 | 1.30 | 7.43 | 3.00 | 2.75 | TG Collet Chucks |
| B3017-0500-4.00 | BT30 TG50 Collet Chuck 18K | 357.0 | 19.0 | 1.65 | 7.50 | 2.75 | 2.75 | TG Collet Chucks |
| B30SF-0625-3.15B | BT30 Shrink Fit Holder 5/8" Balanceable 20K | 379.0 | 3.0 | 1.45 | 5.25 | 2.75 | 2.75 | Shrink Fit Holders |
| B3502-1250-5.28 | BT35 Stub Mill Arbor 1.1/4" | 418.0 | 5.0 | 4.45 | 8.50 | 3.00 | 2.75 | Stub Mill Holders |
| B3503-0001-1.06 | BT35 JT1 Jacobs Drill Chuck Adapter | 245.0 | 3.0 | 1.50 | 6.75 | 3.00 | 3.00 | Jacobs Taper Adapter |
| B3503-0003-0.98 | BT35 JT3 Jacobs Drill Chuck Adapter | 245.0 | 15.0 | 1.65 | 6.75 | 3.00 | 3.12 | Jacobs Taper Adapter |
| B3503-0006-1.02 | BT35 JT6 Jacobs Drill Chuck Adapter | 245.0 | 7.0 | 1.55 | 6.75 | 3.00 | 3.12 | Jacobs Taper Adapter |
| B3504-0001-1.75 | BT35 Morse Taper MT1 Adapter | 245.0 | 14.0 | 1.55 | 6.68 | 3.12 | 2.86 | Morse Taper Adapters |
| B3506-0437-2.38 | BT35 End Mill Holder 7/16" | 257.0 | 17.0 | 1.90 | 6.75 | 3.00 | 3.00 | End Mill Holders |
| B3506-0625B | BT35 End Mill Holder 5/8" Balanceable 24K | 318.0 | 5.0 | 2.05 | 6.75 | 3.00 | 3.00 | End Mill Holders |
| B3506-0875-3.50 | BT35 End Mill Holder 7/8" | 289.0 | 5.0 | 3.05 | 6.75 | 3.00 | 3.00 | End Mill Holders |
| B3506-1000-3.50 | BT35 End Mill Holder 1" | 259.0 | 7.0 | 3.80 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B3506-1250-3.50 | BT35 End Mill Holder 1.1/4" | 288.0 | 13.0 | 3.95 | 8.25 | 3.62 | 3.75 | End Mill Holders |
| B3507-0250-1.75 | BT35 TG25 Collet Chuck 10K | 451.0 | 10.0 | 1.45 | 6.68 | 3.00 | 3.12 | TG Collet Chucks |
| B3507-0500-2.00 | BT35 TG50 Collet Chuck 10K | 451.0 | 12.0 | 1.55 | 6.75 | 3.00 | 3.12 | TG Collet Chucks |
| B3507-0750-2.50 | BT35 TG75 Collet Chuck 10K | 343.0 | 15.0 | 1.90 | 6.68 | 3.00 | 3.12 | TG Collet Chucks |
| B3507-0750B | BT35 TG75 Collet Chuck Balanceable 24K | 375.0 | 23.0 | 2.25 | 6.68 | 3.00 | 3.12 | TG Collet Chucks |
| B3507-1000-3.13 | BT35 TG100 Collet Chuck 10K | 343.0 | 1.0 | 3.00 | 8.25 | 3.56 | 3.56 | TG Collet Chucks |
| B3517-0250-4.00 | BT35 TG25 Collet Chuck 10K | 501.0 | 17.0 | 1.75 | 7.43 | 3.00 | 2.75 | TG Collet Chucks |
| B3517-0500-4.00 | BT35 TG50 Collet Chuck 10K | 501.0 | 12.0 | 2.15 | 7.50 | 3.00 | 2.75 | TG Collet Chucks |
| B35R5-0562-3.02 | BT35 Rigid Tap Holder #1 | 639.0 | 4.0 | 1.95 | 6.68 | 3.06 | 3.12 | Tap Holders |
| B35-TOOLJAW | Tool Jaw BT35 | 446.0 | 3.0 | 16.00 | 9.25 | 7.00 | 9.25 | Accessories |
| B4001-1000-1.75DIN | BT40 Shell Mill Holder 1" DIN | 220.0 | 3.0 | 3.30 | 8.25 | 3.75 | 3.75 | Shell Mill Holders |
| B4001-1250-2.00DIN | BT40 Shell Mill Holder 1.1/4" DIN | 214.0 | 6.0 | 4.20 | 8.31 | 3.62 | 3.75 | Shell Mill Holders |
| B4001-1250B | BT40 Shell Mill Holder 1.1/4" Balanceable 24K | 235.0 | 7.0 | 4.30 | 8.37 | 3.75 | 3.75 | Shell Mill Holders |
| B4001-1500-2.00DIN | BT40 Shell Mill Holder 1.1/2" DIN | 235.0 | 3.0 | 5.20 | 9.82 | 4.75 | 4.75 | Shell Mill Holders |
| B4001-27-50 | BT40 Shell Mill Holder 27mm | 225.0 | 13.0 | 3.20 | 8.25 | 3.50 | 3.50 | Shell Mill Holders |
| B4001-32-50 | BT40 Shell Mill Holder 32mm | 225.0 | 5.0 | 3.75 | 8.25 | 3.50 | 3.50 | Shell Mill Holders |
| B4002-1500-5.60 | BT40 Stub Mill Arbor 1.1/2" | 548.0 | 4.0 | 6.80 | 11.00 | 4.00 | 4.00 | Stub Mill Holders |
| B4003-0006-1.61 | BT40 JT6 Jacobs Drill Chuck Adapter | 187.0 | 11.0 | 2.54 | 8.25 | 3.50 | 3.50 | Jacobs Taper Adapter |
| B4004-0002-2.36 | BT40 Morse Taper MT2 Adapter | 173.0 | 9.0 | 2.48 | 8.25 | 3.50 | 3.50 | Morse Taper Adapters |
| B4005-0875-5.39(C) | BT40 Tension/Compression Tap Holder #2 Coolant | 1435.0 | 6.0 | 4.95 | 11.18 | 4.00 | 4.25 | Tap Holders |
| B4005-0875-6.34 | BT40 Tension/Compression Tap Holder #2 | 590.0 | 1.0 | 6.10 | 8.25 | 3.50 | 3.50 | Tap Holders |
| B4005-1375-9.00 | BT40 Tension/Compression Tap Holder #3 | 872.0 | 3.0 | 13.08 | 14.50 | 4.12 | 4.00 | Tap Holders |
| B4006-0187B | BT40 End Mill Holder 3/16" Balanceable 24K | 257.0 | 24.0 | 2.60 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-0250B | BT40 End Mill Holder 1/4" Balanceable 24K | 257.0 | 40.0 | 2.30 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-0375-2.50DIN | BT40 End Mill Holder 3/8" DIN 15K | 162.0 | 23.0 | 2.40 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-0375-4.00B | BT40 End Mill Holder 3/8" Balanceable 24K | 524.0 | 3.0 | 2.60 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-0375B-2.50 | BT40 End Mill Holder 3/8" Balanceable 24K | 257.0 | 5.0 | 2.40 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-0500-2.50DIN | BT40 End Mill Holder 1/2" DIN 15K | 194.0 | 13.0 | 2.65 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-0750-2.50DIN | BT40 End Mill Holder 3/4" DIN 15K | 162.0 | 16.0 | 3.00 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-0750-4.00B | BT40 End Mill Holder 3/4" Balanceable 24K | 514.0 | 1.0 | 3.70 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-0750B | BT40 End Mill Holder 3/4" Balanceable 24K | 257.0 | 13.0 | 3.00 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-0875-3.38 | BT40 End Mill Holder 7/8" 15K | 149.0 | 6.0 | 3.70 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-0875B | BT40 End Mill Holder 7/8" Balanceable 24K | 272.0 | 17.0 | 3.65 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-12-2.50 | BT40 End Mill Holder 12mm 15K | 204.0 | 2.0 | 2.68 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-14-2.50 | BT40 End Mill Holder 14mm 15K | 204.0 | 9.0 | 3.00 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-16-2.50 | BT40 End Mill Holder 16mm 25K | 211.0 | 8.0 | 3.00 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-18-2.50 | BT40 End Mill Holder 18mm 15K | 204.0 | 6.0 | 3.00 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4006-8-2.50 | BT40 End Mill Holder 8mm 15K | 204.0 | 5.0 | 2.44 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4007-0011-4.00DIN-M | BT40 ER11 Collet Chuck HexNut DIN_Mod 25K | 0.0 | 1.0 | 2.60 | 8.25 | 3.00 | 3.00 | ER Collet Chucks |
| B4007-0020B | BT40 ER20 Collet Chuck HiTorque BearingNut Balanceable 24K | 381.0 | 2.0 | 2.35 | 8.25 | 3.68 | 3.75 | ER Collet Chucks |
| B4007-0032B | BT40 ER32 Collet Chuck HiTorque BearingNut Balanceable 24K | 406.0 | 21.0 | 2.80 | 8.25 | 3.75 | 3.75 | ER Collet Chucks |
| B4007-0200-3.00 | BT40 DA200 Collet Chuck 8K | 259.0 | 31.0 | 2.40 | 8.25 | 3.50 | 3.50 | DA Collet Chucks |
| B4007-0250-2.00 | BT40 TG25 Collet Chuck 18K | 241.0 | 14.0 | 2.36 | 8.31 | 3.56 | 3.62 | TG Collet Chucks |
| B4007-0500-2.25 | BT40 TG50 Collet Chuck 18K | 400.0 | 15.0 | 2.44 | 8.25 | 3.50 | 3.50 | TG Collet Chucks |
| B4007-1000B | BT40 TG100 Collet Chuck Balanceable 24K | 306.0 | 4.0 | 3.85 | 8.37 | 3.56 | 4.00 | TG Collet Chucks |
| B40-1500(ISO) | Retention Knob/Pull Stud BT40 Coolant O-ring | 64.0 | 1.0 | 0.20 | 2.50 | 1.00 | 1.00 | Pull Studs |
| B4016-0187B | BT40 End Mill Holder 3/16" Balanceable 24K | 287.0 | 9.0 | 2.60 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4016-0312-4.00DIN | BT40 End Mill Holder 5/16" DIN 15K | 149.0 | 3.0 | 2.60 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4016-0625-4.00DIN | BT40 End Mill Holder 5/8" DIN 15K | 192.0 | 2.0 | 3.70 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4016-0625B | BT40 End Mill Holder 5/8" Balanceable 24K | 373.0 | 1.0 | 3.70 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4016-0750-4.00DIN | BT40 End Mill Holder 3/4" DIN 15K | 189.0 | 1.0 | 3.80 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4016-0875-6.00 | BT40 End Mill Holder 7/8" 15K | 226.0 | 8.0 | 5.82 | 11.00 | 4.00 | 4.00 | End Mill Holders |
| B4016-0875B | BT40 End Mill Holder 7/8" Balanceable 24K | 151.0 | 5.0 | 5.75 | 11.00 | 4.00 | 4.00 | End Mill Holders |
| B4016-1000-6.00DIN | BT40 End Mill Holder 1" DIN 15K | 220.0 | 6.0 | 7.30 | 11.00 | 4.00 | 4.00 | End Mill Holders |
| B4016-1000B | BT40 End Mill Holder 1" Balanceable 24K | 287.0 | 24.0 | 7.20 | 11.00 | 4.00 | 4.00 | End Mill Holders |
| B4016-10-4.00 | BT40 End Mill Holder 10mm 15K | 323.0 | 8.0 | 3.50 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4016-12-4.00 | BT40 End Mill Holder 12mm 15K | 198.0 | 1.0 | 3.20 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4016-1250B | BT40 End Mill Holder 1.1/4" Balanceable 24K | 310.0 | 2.0 | 3.70 | 11.00 | 4.00 | 4.00 | End Mill Holders |
| B4016-14-4.00 | BT40 End Mill Holder 14mm 15K | 198.0 | 21.0 | 3.70 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B4016-18-4.00 | BT40 End Mill Holder 18mm 15K | 198.0 | 5.0 | 4.05 | 8.50 | 3.75 | 4.00 | End Mill Holders |
| B4016-32-6.00 | BT40 End Mill Holder 32mm 15K | 276.0 | 8.0 | 7.65 | 11.00 | 4.00 | 4.00 | End Mill Holders |
| B4017-0016-4.00B | BT40 ER16 Collet Chuck HiTorque BearingNut Balanceable 24K | 410.0 | 5.0 | 2.40 | 8.00 | 4.00 | 4.00 | ER Collet Chucks |
| B4017-0025B | BT40 ER25 Collet Chuck HiTorque BearingNut Balanceable 24K | 444.0 | 13.0 | 2.45 | 8.25 | 3.93 | 3.75 | ER Collet Chucks |
| B4017-0032B | BT40 ER32 Collet Chuck HiTorque BearingNut Balanceable 24K | 474.0 | 9.0 | 3.80 | 11.13 | 4.00 | 4.00 | ER Collet Chucks |
| B4017-0100-6.00 | BT40 DA100 Collet Chuck 8K | 296.0 | 23.0 | 3.10 | 11.00 | 4.00 | 4.00 | DA Collet Chucks |
| B4017-0180-6.00 | BT40 DA180 Collet Chuck 8K | 212.0 | 12.0 | 3.80 | 11.00 | 4.25 | 4.25 | DA Collet Chucks |
| B4017-0250-4.00 | BT40 TG25 Collet Chuck 18K | 435.0 | 42.0 | 2.50 | 8.25 | 3.75 | 3.75 | TG Collet Chucks |
| B4017-1000-5.50 | BT40 TG100 Collet Chuck 18K | 446.0 | 9.0 | 5.80 | 11.00 | 4.25 | 4.25 | TG Collet Chucks |
| B4017-1000-5.50DIN | BT40 TG100 Collet Chuck DIN 18K | 318.0 | 2.0 | 5.80 | 11.18 | 4.18 | 4.18 | TG Collet Chucks |
| B4017-1000B | BT40 TG100 Collet Chuck Balanceable 24K | 327.0 | 6.0 | 5.50 | 11.12 | 4.25 | 4.00 | TG Collet Chucks |
| B4027-0020-6.00 | BT40 ER20 Collet Chuck HiTorque BearingNut 18K | 330.0 | 2.0 | 3.80 | 11.13 | 4.00 | 4.00 | ER Collet Chucks |
| B4027-0025-6.00 | BT40 ER25 Collet Chuck HiTorque BearingNut 18K | 416.0 | 16.0 | 3.80 | 11.00 | 4.00 | 4.00 | ER Collet Chucks |
| B40-6000 | Retention Knob/Pull Stud BT40 | 37.0 | 135.0 | 0.15 | 2.50 | 1.00 | 1.00 | Pull Studs |
| B40-9000(H) | Retention Knob/Pull Stud BT40 Coolant | 49.0 | 9.0 | 0.20 | 2.50 | 1.00 | 1.00 | Pull Studs |
| B40HSP-ETS14-115 | BT40 HiSpinner Spindle Speeder ETS14 X9810 | 164.0 | 1.0 | 14.40 | 15.25 | 18.50 | 8.00 | Speed Increasers |
| B40-MASTER | Presetter Master Gauge BT40 w/o Flange | 549.0 | 22.0 | 2.80 | 6.75 | 3.00 | 3.00 | Test Bars |
| B40R5-0562-2.84 | BT40 Rigid Tap Holder #1 | 0.0 | 4.0 | 2.85 | 3.00 | 3.00 | 7.00 | Tap Holders |
| B40S5-1375-6.40 | BT40 Tension/Compression Tap Holder #3 | 1408.0 | 7.0 | 6.92 | 11.25 | 4.12 | 4.00 | Tap Holders |
| B40S6-0125-1.38 | BT40 End Mill Holder 1/8" Stub Length 15K | 240.0 | 23.0 | 2.24 | 8.25 | 3.50 | 3.50 | End Mill Holders |
| B40S6-0187-1.38 | BT40 End Mill Holder 3/16" Stub Length 15K | 193.0 | 7.0 | 2.26 | 8.25 | 3.50 | 3.50 | End Mill Holders |
| B40S6-0250-1.38 | BT40 End Mill Holder 1/4" Stub Length 15K | 138.0 | 3.0 | 2.20 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| B40S6-0375-1.38 | BT40 End Mill Holder 3/8" Stub Length 15K | 134.0 | 29.0 | 2.28 | 8.25 | 3.50 | 3.50 | End Mill Holders |
| B40S6-0625-1.75 | BT40 End Mill Holder 5/8" Stub Length 15K | 129.0 | 4.0 | 2.48 | 8.25 | 3.50 | 3.50 | End Mill Holders |
| B40SF-0125-6.30 | BT40 Shrink Fit Holder 1/8" 15K | 643.0 | 1.0 | 2.95 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-0187-3.15 | BT40 Shrink Fit Holder 3/16" 15K | 567.0 | 2.0 | 2.30 | 6.00 | 3.00 | 3.00 | Shrink Fit Holders |
| B40SF-0187-6.30 | BT40 Shrink Fit Holder 3/16" 15K | 643.0 | 18.0 | 3.05 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-0250-6.30B | BT40 Shrink Fit Holder 1/4" Balanceable 20K | 458.0 | 6.0 | 3.50 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-0375-6.30B1 | BT40 Shrink Fit Holder 3/8" 20K | 8.0 | 2.0 | 3.35 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-0500-6.30 | BT40 Shrink Fit Holder 1/2" 20K | 505.0 | 7.0 | 3.65 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-0625-3.54 | BT40 Shrink Fit Holder 5/8" 20K | 427.0 | 2.0 | 2.85 | 7.00 | 3.00 | 3.00 | Shrink Fit Holders |
| B40SF-0625-6.30 | BT40 Shrink Fit Holder 5/8" 20K | 518.0 | 10.0 | 3.85 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-0625-6.30B | BT40 Shrink Fit Holder 5/8" 20K | 549.0 | 1.0 | 3.75 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-10-160B | BT40 Shrink Fit Holder 10mm Balanceable 20K | 465.0 | 1.0 | 3.40 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-10-90B | BT40 Shrink Fit Holder 10mm Balanceable 20K | 463.0 | 3.0 | 2.80 | 8.25 | 3.00 | 3.00 | Shrink Fit Holders |
| B40SF-12-160B | BT40 Shrink Fit Holder 12mm Balanceable 20K | 465.0 | 6.0 | 3.65 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-1250-6.30B | BT40 Shrink Fit Holder 1.1/4" Balanceable 20K | 631.0 | 4.0 | 5.65 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-16-160B | BT40 Shrink Fit Holder 16mm Balanceable 20K | 465.0 | 20.0 | 3.80 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-16-90B | BT40 Shrink Fit Holder 16mm Balanceable 20K | 440.0 | 2.0 | 2.85 | 8.25 | 3.00 | 3.00 | Shrink Fit Holders |
| B40SF-20-160B | BT40 Shrink Fit Holder 20mm Balanceable 20K | 510.0 | 10.0 | 4.40 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-20-90 | BT40 Shrink Fit Holder 20mm 15K | 424.0 | 4.0 | 3.10 | 8.25 | 3.00 | 3.00 | Shrink Fit Holders |
| B40SF-20-90B | BT40 Shrink Fit Holder 20mm Balanceable 20K | 631.0 | 3.0 | 3.05 | 8.25 | 3.00 | 3.00 | Shrink Fit Holders |
| B40SF-25-100B | BT40 Shrink Fit Holder 25mm Balanceable 20K | 482.0 | 6.0 | 4.00 | 8.25 | 3.00 | 3.00 | Shrink Fit Holders |
| B40SF-25-160B | BT40 Shrink Fit Holder 25mm Balanceable 20K | 631.0 | 2.0 | 4.95 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-32-100B | BT40 Shrink Fit Holder 32mm Balanceable 20K | 448.0 | 11.0 | 3.70 | 8.25 | 3.00 | 3.00 | Shrink Fit Holders |
| B40SF-32-160B | BT40 Shrink Fit Holder 32mm Balanceable 20K | 631.0 | 4.0 | 5.75 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-8-160B | BT40 Shrink Fit Holder 8mm Balanceable 20K | 465.0 | 22.0 | 3.35 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| B40SF-8-90B | BT40 Shrink Fit Holder 8mm Balanceable 20K | 390.0 | 9.0 | 2.65 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| B4502-1000-6.17 | BT45 Stub Mill Arbor 1" | 870.0 | 2.0 | 7.25 | 13.00 | 5.75 | 5.50 | Stub Mill Holders |
| B4502-1500-6.60 | BT45 Stub Mill Arbor 1.1/2" | 622.0 | 1.0 | 10.25 | 12.00 | 5.00 | 5.00 | Stub Mill Holders |
| B4503-0002-1.59 | BT45 JT2 Jacobs Drill Chuck Adapter | 299.0 | 9.0 | 5.00 | 12.00 | 5.12 | 5.12 | Jacobs Taper Adapter |
| B4503-0003-1.55 | BT45 JT3 Jacobs Drill Chuck Adapter | 303.0 | 8.0 | 5.15 | 12.00 | 5.00 | 5.00 | Jacobs Taper Adapter |
| B4503-0006-1.59 | BT45 JT6 Jacobs Drill Chuck Adapter | 342.0 | 17.0 | 5.10 | 12.00 | 5.12 | 5.12 | Jacobs Taper Adapter |
| B4503-0033-1.59 | BT45 JT33 Jacobs Drill Chuck Adapter | 286.0 | 3.0 | 5.05 | 12.00 | 5.25 | 5.00 | Jacobs Taper Adapter |
| B4504-0002-2.36 | BT45 Morse Taper MT2 Adapter | 443.0 | 8.0 | 5.05 | 12.00 | 5.00 | 5.00 | Morse Taper Adapters |
| B4504-0003-3.00 | BT45 Morse Taper MT3 Adapter | 400.0 | 8.0 | 5.25 | 12.00 | 5.12 | 5.12 | Morse Taper Adapters |
| B4504-0004-3.54 | BT45 Morse Taper MT4 Adapter | 417.0 | 6.0 | 5.55 | 12.00 | 5.00 | 5.00 | Morse Taper Adapters |
| B4504-0005-4.76 | BT45 Morse Taper MT5 Adapter | 519.0 | 9.0 | 7.40 | 12.00 | 5.12 | 5.12 | Morse Taper Adapters |
| B4505-0562-4.92 | BT45 Tension/Compression Tap Holder #1 | 864.0 | 6.0 | 5.85 | 12.12 | 5.00 | 5.12 | Tap Holders |
| B4505-0875-5.94 | BT45 Tension/Compression Tap Holder #2 | 1074.0 | 6.0 | 7.95 | 12.00 | 5.12 | 5.12 | Tap Holders |
| B4505-1375-9.19 | BT45 Tension/Compression Tap Holder #3 | 1162.0 | 5.0 | 15.60 | 14.50 | 4.25 | 4.12 | Tap Holders |
| B4506-0750-3.00 | BT45 End Mill Holder 3/4" | 578.0 | 15.0 | 4.80 | 12.00 | 5.00 | 5.00 | End Mill Holders |
| B4506-0875-4.00 | BT45 End Mill Holder 7/8" | 347.0 | 10.0 | 6.50 | 12.00 | 5.12 | 5.00 | End Mill Holders |
| B4506-1000-4.00 | BT45 End Mill Holder 1" | 419.0 | 3.0 | 7.15 | 12.18 | 5.06 | 5.06 | End Mill Holders |
| B4506-2000-5.00 | BT45 End Mill Holder 2" | 527.0 | 3.0 | 13.15 | 13.00 | 5.56 | 5.50 | End Mill Holders |
| B4507-0180-4.00 | BT45 DA180 Collet Chuck | 480.0 | 11.0 | 5.50 | 12.00 | 5.00 | 5.00 | DA Collet Chucks |
| B4507-1500-4.00 | BT45 1TG50 Collet Chuck 10K | 475.0 | 1.0 | 7.45 | 12.00 | 5.12 | 5.00 | TG Collet Chucks |
| B4517-1500-5.50 | BT45 1TG50 Collet Chuck 10K | 780.0 | 2.0 | 9.45 | 12.00 | 5.00 | 5.00 | TG Collet Chucks |
| B5001-0750-6.00CP | BT50 Shell Mill Holder 3/4" CoolantPorts 20K | 0.0 | 1.0 | 11.70 | 12.50 | 4.50 | 4.50 | Shell Mill Holders |
| B5001-2000-2.00 | BT50 Shell Mill Holder 2" | 572.0 | 1.0 | 12.05 | 10.00 | 5.00 | 5.00 | Shell Mill Holders |
| B5002-1000-6.17 | BT50 Stub Mill Arbor 1" | 534.0 | 1.0 | 10.55 | 13.00 | 5.50 | 5.50 | Stub Mill Holders |
| B5002-1500-6.60 | BT50 Stub Mill Arbor 1.1/2" | 870.0 | 1.0 | 13.35 | 13.00 | 5.50 | 5.50 | Stub Mill Holders |
| B5003-0002-1.61 | BT50 JT2 Jacobs Drill Chuck Adapter | 305.0 | 5.0 | 8.25 | 9.75 | 4.75 | 4.75 | Jacobs Taper Adapter |
| B5003-0004-1.49 | BT50 JT4 Jacobs Drill Chuck Adapter | 305.0 | 3.0 | 8.70 | 10.00 | 4.50 | 4.75 | Jacobs Taper Adapter |
| B5004-0002-1.75 | BT50 Morse Taper MT2 Adapter | 336.0 | 14.0 | 8.05 | 9.75 | 4.75 | 4.75 | Morse Taper Adapters |
| B5004-0003-1.75 | BT50 Morse Taper MT3 Adapter | 296.0 | 3.0 | 7.80 | 9.75 | 4.75 | 4.75 | Morse Taper Adapters |
| B5004-0005-4.13 | BT50 Morse Taper MT5 Adapter | 519.0 | 4.0 | 9.30 | 9.75 | 4.75 | 4.75 | Morse Taper Adapters |
| B5005-0562-4.92 | BT50 Tension/Compression Tap Holder #1 | 640.0 | 9.0 | 9.05 | 13.00 | 5.50 | 5.50 | Tap Holders |
| B5005-0875-5.55 | BT50 Tension/Compression Tap Holder #2 | 693.0 | 4.0 | 10.80 | 13.00 | 5.50 | 5.50 | Tap Holders |
| B5005-1375-8.31(C) | BT50 Tension/Compression Tap Holder #3 Coolant | 2189.0 | 8.0 | 17.20 | 16.00 | 6.00 | 4.75 | Tap Holders |
| B5006-0750B | BT50 End Mill Holder 3/4" Balanceable 15K | 327.0 | 1.0 | 8.60 | 9.87 | 4.75 | 4.81 | End Mill Holders |
| B5006-10-2.75 | BT50 End Mill Holder 10mm 10K | 249.0 | 3.0 | 8.25 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| B5006-1250B | BT50 End Mill Holder 1.1/4" Balanceable 15K | 417.0 | 10.0 | 10.15 | 9.78 | 4.86 | 4.93 | End Mill Holders |
| B5006-14-3.00 | BT50 End Mill Holder 14mm 10K | 249.0 | 12.0 | 8.60 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| B5006-18-3.00 | BT50 End Mill Holder 18mm 10K | 249.0 | 9.0 | 8.85 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| B5006-42-4.49 | BT50 End Mill Holder 42mm 10K | 332.0 | 2.0 | 12.05 | 9.81 | 4.75 | 4.75 | End Mill Holders |
| B5006-50-5.00 | BT50 End Mill Holder 50mm 10K | 352.0 | 3.0 | 15.20 | 13.00 | 5.50 | 5.50 | End Mill Holders |
| B5006-8-2.50 | BT50 End Mill Holder 8mm 10K | 249.0 | 5.0 | 8.20 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| B5007-0016B | BT50 ER16 Collet Chuck HiTorque BearingNut Balanceable 15K | 460.0 | 12.0 | 8.10 | 9.81 | 4.75 | 4.86 | ER Collet Chucks |
| B5007-0025B | BT50 ER25 Collet Chuck HiTorque BearingNut Balanceable 15K | 244.0 | 5.0 | 8.30 | 9.75 | 4.86 | 4.75 | ER Collet Chucks |
| B5007-0500-2.63 | BT50 TG50 Collet Chuck 10K | 501.0 | 8.0 | 8.25 | 9.75 | 4.75 | 4.75 | TG Collet Chucks |
| B5007-1500-4.00 | BT50 TG150 Collet Chuck 10K | 802.0 | 2.0 | 10.20 | 9.75 | 4.75 | 4.75 | TG Collet Chucks |
| B5011-1000-4.00 | BT50 Shell Mill Holder 1" | 370.0 | 6.0 | 11.20 | 13.00 | 5.50 | 5.50 | Shell Mill Holders |
| B5016-0500B | BT50 End Mill Holder 1/2" Balanceable 15K | 251.0 | 1.0 | 8.40 | 13.00 | 5.50 | 5.50 | End Mill Holders |
| B5016-0625-6.00 | BT50 End Mill Holder 5/8" 10K | 336.0 | 12.0 | 10.10 | 13.00 | 5.50 | 5.50 | End Mill Holders |
| B5016-0625B | BT50 End Mill Holder 5/8" Balanceable 15K | 237.0 | 1.0 | 10.05 | 13.00 | 5.75 | 5.50 | End Mill Holders |
| B5016-0625B-4.0 | BT50 End Mill Holder 5/8" Balanceable 15K | 391.0 | 3.0 | 9.05 | 9.86 | 4.86 | 4.75 | End Mill Holders |
| B5016-0750B-4.0 | BT50 End Mill Holder 3/4" 15K | 391.0 | 5.0 | 9.70 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| B5016-0875-6.00 | BT50 End Mill Holder 7/8" 10K | 416.0 | 12.0 | 11.15 | 13.00 | 5.50 | 5.50 | End Mill Holders |
| B5016-0875B | BT50 End Mill Holder 7/8" Balanceable 15K | 251.0 | 9.0 | 11.10 | 13.00 | 5.50 | 5.50 | End Mill Holders |
| B5016-1250B | BT50 End Mill Holder 1.1/4" Balanceable 15K | 500.0 | 3.0 | 12.70 | 12.00 | 5.56 | 5.50 | End Mill Holders |
| B5016-1500-7.00 | BT50 End Mill Holder 1.1/2" 10K | 562.0 | 7.0 | 16.75 | 13.00 | 5.50 | 5.50 | End Mill Holders |
| B5017-0016B | BT50 ER16 Collet Chuck HiTorque BearingNut Balanceable 15K | 545.0 | 11.0 | 8.05 | 9.75 | 4.75 | 4.93 | ER Collet Chucks |
| B5017-0025-4.00 | BT50 ER25 Collet Chuck HiTorque BearingNut 10K | 477.0 | 4.0 | 8.70 | 9.75 | 4.75 | 4.75 | ER Collet Chucks |
| B5017-0025B | BT50 ER25 Collet Chuck HiTorque BearingNut Balanceable 15K | 269.0 | 5.0 | 8.60 | 9.81 | 4.75 | 5.00 | ER Collet Chucks |
| B5017-0500-4.00 | BT50 TG50 Collet Chuck 10K | 559.0 | 12.0 | 8.55 | 13.00 | 5.56 | 5.50 | TG Collet Chucks |
| B5017-0750-5.50 | BT50 TG75 Collet Chuck 10K | 417.0 | 4.0 | 9.70 | 13.00 | 5.50 | 5.50 | TG Collet Chucks |
| B50-6000-125 | Retention Knob/Pull Stud BT50 170mm OAL | 42.0 | 2.0 | 1.50 | 8.75 | 2.12 | 2.00 | Pull Studs |
| B50BH-0875-1.75 | BT50 Threaded Boring Head Holder 7/8-20 | 379.0 | 12.0 | 8.40 | 10.00 | 5.00 | 5.00 | Male Threaded Boring |
| B50F1-2500-3.00 | BT50 Shell Mill Holder 2.1/2" | 523.0 | 12.0 | 18.80 | 11.00 | 7.00 | 7.00 | Shell Mill Holders |
| B50H6-0020 | BT50Threaded Boring Head Holder 20mm | 666.0 | 1.0 | 22.95 | 16.00 | 9.00 | 8.00 | Male Threaded Boring |
| B50-MITSUI | Retention Knob/Pull Stud BT50 | 46.0 | 15.0 | 0.70 | 1.50 | 1.50 | 3.87 | Pull Studs |
| B50R5-0562-3.02 | BT50 Rigid Tap Holder #1 | 785.0 | 1.0 | 8.50 | 10.00 | 5.00 | 5.00 | Tap Holders |
| B50R5-0562-3.23(C) | BT50 Rigid Tap Holder #1 Coolant | 927.0 | 5.0 | 8.30 | 9.75 | 4.86 | 4.86 | Tap Holders |
| B50R5-1375-5.23 | BT50 Rigid Tap Holder #3 | 1053.0 | 4.0 | 12.35 | 13.00 | 5.50 | 5.50 | Tap Holders |
| B50RAM-ER25-225ST-80FP | BT50 AngleHead ER25 Slim 80mm Pitch FlatPIN | 14574.0 | 1.0 | 27.50 | 15.75 | 22.75 | 10.25 | Angle Heads |
| B50RAM-ER32-190-80FP | BT50 AngleHead ER32 80mm Pitch FlatPIN | 10535.0 | 1.0 | 29.20 | 15.00 | 22.75 | 9.75 | Angle Heads |
| B50S5-0562-3.05 | BT50 Tension/Compression Tap Holder #1 | 772.0 | 2.0 | 8.55 | 9.81 | 4.75 | 4.75 | Tap Holders |
| B50S5-1375-5.55 | BT50 Tension/Compression Tap Holder #3 | 1794.0 | 8.0 | 13.00 | 13.00 | 5.50 | 5.50 | Tap Holders |
| B50SF-0250-6.30B | BT50 Shrink Fit Holder 1/4" Balanceable 18K | 889.0 | 1.0 | 8.75 | 13.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-0375-3.15B | BT50 Shrink Fit Holder 3/8" Balanceable 18K | 543.0 | 6.0 | 8.05 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-0500-3.15B | BT50 Shrink Fit Holder 1/2" Balanceable 18K | 543.0 | 2.0 | 8.20 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-0625-3.15B | BT50 Shrink Fit Holder 5/8" Balanceable 18K | 850.0 | 2.0 | 8.20 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-0625-6.30B | BT50 Shrink Fit Holder 5/8" Balanceable 18K | 889.0 | 3.0 | 9.30 | 13.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-1000-3.94H | BT50 Shrink Fit Holder 1" Haimer 18K | 175.0 | 1.0 | 9.45 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-1250-3.94B | BT50 Shrink Fit Holder 1.1/4" Balanceable 18K | 543.0 | 8.0 | 9.00 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-1250-6.30B | BT50 Shrink Fit Holder 1.1/4" Balanceable 18K | 680.0 | 1.0 | 11.00 | 13.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-16-160B | BT50 Shrink Fit Holder 16mm Balanceable 18K | 889.0 | 4.0 | 9.05 | 13.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-20-100B | BT50 Shrink Fit Holder 20mm Balanceable 18K | 629.0 | 2.0 | 8.65 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-20-160B | BT50 Shrink Fit Holder 20mm Balanceable 18K | 666.0 | 4.0 | 9.85 | 13.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-25-100B | BT50 Shrink Fit Holder 25mm Balanceable 18K | 629.0 | 4.0 | 8.80 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-32-100B | BT50 Shrink Fit Holder 32mm Balanceable 18K | 629.0 | 2.0 | 7.95 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-32-160B | BT50 Shrink Fit Holder 32mm Balanceable 18K | 666.0 | 2.0 | 11.15 | 13.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-6-100B | BT50 Shrink Fit Holder 6mm Balanceable 18K | 748.0 | 2.0 | 8.25 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-8-100 | BT50 Shrink Fit Holder 8mm 18K | 559.0 | 4.0 | 8.50 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-8-100B | BT50 Shrink Fit Holder 8mm Balanceable 18K | 721.0 | 3.0 | 8.45 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| B50SF-8-160B | BT50 Shrink Fit Holder 8mm Balanceable 18K | 889.0 | 3.0 | 8.95 | 13.00 | 4.00 | 4.00 | Shrink Fit Holders |
| BAL-KIT(M3)-10-SET | Balancing Kit (M3) OLD | 10.0 | 23.0 | 0.10 | 5.00 | 1.12 | 3.00 | Balance |
| BAL-KIT(M3)-200-SET | Balancing Kit (M3) NEW | 94.0 | 3.0 | 0.60 | 8.31 | 4.75 | 1.32 | Balance |
| BAL-KIT(M4)-10-SET | Balancing Kit (M4) OLD | 14.0 | 22.0 | 0.02 | 1.12 | 5.00 | 3.00 | Balance |
| BAL-KIT(M4)-200-SET | Balancing Kit (M4) NEW | 130.0 | 1.0 | 0.78 | 3.25 | 4.12 | 2.00 | Balance |
| BMT45-BG10Z-MSD-C-HI | BMT45 Static BG1" Z<Axial>90D MainSubDual IntCoolant CH77/85 | 1742.0 | 9.0 | 11.51 | 0.00 | 0.00 | 0.00 | BMT Static Tools |
| BMT45-ER25Z-ICE-CCW | BMT45 Live ER25 Z<Axial>90D IntExtCoolant7MP 6.5K CH65 CCW | 3845.0 | 3.0 | 9.95 | 9.50 | 7.75 | 4.75 | BMT Live Tools |
| BMT55-BG10Z-MST | BMT55 Static BG1" Z<Axial>90D MainSubTriple ExtCool CH70/102 | 1225.0 | 17.0 | 13.10 | 7.00 | 5.50 | 4.50 | BMT Static Tools |
| BMT55-ER32Z-85-CCW | BMT55 Live ER32 Z<Axial>90D ExtCool 6.5K CH85 CCW | 4189.0 | 9.0 | 15.85 | 11.00 | 7.00 | 10.00 | BMT Live Tools |
| BMT55-ER32Z-85-ICE-CCW | BMT55 Live ER32 Z<Axial>90D IntExtCoolant7MP 6.5K CH85 CCW | 4376.0 | 1.0 | 15.45 | 9.50 | 7.50 | 5.00 | BMT Live Tools |
| BMT55-ER32Z-CCW | BMT55 Live ER32 Z<Axial>90D ExtCool 6.5K CH70 CCW | 3673.0 | 6.0 | 15.10 | 10.00 | 7.50 | 4.50 | BMT Live Tools |
| BMT55-ER32Z-ICE-CCW | BMT55 Live ER32 Z<Axial>90D IntExtCoolant7MP 6.5K CH70 CCW | 4128.0 | 16.0 | 15.20 | 10.00 | 7.75 | 4.75 | BMT Live Tools |
| BMT55-ID10Z | BMT55 Static ID1" SQ Z<Axial>90D ExtCool | 605.0 | 34.0 | 11.80 | 7.00 | 5.50 | 4.50 | BMT Static Tools |
| BMT55-ID75Z | BMT55 Static ID3/4" SQ Z<Axial>90D ExtCool | 605.0 | 8.0 | 12.45 | 7.00 | 5.50 | 4.50 | BMT Static Tools |
| BMT55-OD10X-MSD | BMT55 Static OD1" X<Radial>STRT MainSubDual 2+2 ExtCool | 972.0 | 11.0 | 15.00 | 10.00 | 7.50 | 6.25 | BMT Static Tools |
| BMT55-OD75X-MSD | BMT55 Static OD3/4" SQ X<Radial>STRT MainSubDual 2+2 ExtCool | 972.0 | 21.0 | 13.70 | 7.25 | 5.50 | 4.50 | BMT Static Tools |
| BMT65-ER32Z-72-CCW | BMT65 Live ER32 Z<Axial>90D ExtCool HiSpeed 10K CH72 CCW | 5001.0 | 8.0 | 16.30 | 11.00 | 7.50 | 10.50 | BMT Live Tools |
| BMT65-ER32Z-72-ICE-CCW | BMT65 Live ER32 Z<Axial>90D IntExtCoolant7MP HiSpeed 10K CH72 CCW | 5369.0 | 9.0 | 16.75 | 10.83 | 7.28 | 10.23 | BMT Live Tools |
| BMT65-OD75X-MSD | BMT65 Static OD3/4" SQ X<Radial>STRT MainSubDual 2+2 ExtCool | 1025.0 | 17.0 | 18.45 | 10.00 | 7.56 | 6.18 | BMT Static Tools |
| BRS-3.970-110L-SPL | HSS Broach Reamer ST Shank 3.970mm NSK #RHU1S2003912 | 82.0 | 400.0 | 0.05 | 0.62 | 5.12 | 5.25 | Reamers |
| BT30-SF0125-3.15B | BT30 Shrink Fit Holder 1/8" Balanceable 25K | 669.0 | 1.0 | 1.00 | 5.25 | 2.75 | 2.75 | Shrink Fit Holders |
| BT30-TD-1-MASTER | BT30 Tool Setter TD-1 Master Gauge | 531.0 | 4.0 | 1.80 | 7.50 | 3.00 | 3.00 | Probes |
| BT30-VC6-45 | BT30 VC6 Collet Chuck 40K | 484.0 | 45.0 | 1.21 | 6.00 | 3.25 | 3.25 | VC Collet Chucks |
| BT30-VC6-60 | BT30 VC6 Collet Chuck 40K | 490.0 | 26.0 | 1.39 | 6.00 | 3.25 | 3.25 | VC Collet Chucks |
| BT30-VC6-90 | BT30 VC6 Collet Chuck 40K | 517.0 | 20.0 | 1.76 | 6.00 | 3.25 | 3.25 | VC Collet Chucks |
| BT35-C3/4-70 | BT35 Milling Chuck 3/4" 8K | 1172.0 | 11.0 | 2.55 | 10.37 | 5.00 | 3.25 | Milling Chucks |
| BT40-C3/4F-70-DIN | BT40 Milling Chuck 3/4" DIN_Mod 8K | 916.0 | 1.0 | 3.81 | 10.00 | 4.50 | 4.50 | Milling Chucks |
| BT40-C3/4F-75G | BT40 Milling Chuck 3/4" HiSpeed DIN 25K | 650.0 | 12.0 | 3.81 | 10.00 | 4.50 | 4.50 | Milling Chucks |
| BT40-ER32-70 | BT40 ER32 Collet Chuck SolidNut 25K | 206.0 | 40.0 | 2.80 | 8.27 | 3.74 | 3.74 | ER Collet Chucks |
| BT40-SF0187-6.30CP | BT40 Shrink Fit Holder 3/16" CoolantPorts 25K | 558.0 | 19.0 | 3.65 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| BT40-SF0250-6.30 | BT40 Shrink Fit Holder 1/4" 25K | 370.0 | 6.0 | 3.65 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| BT40-SF0375-5.12 | BT40 Shrink Fit Holder 3/8" 25K | 298.0 | 7.0 | 3.55 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| BT40-SF0375-6.30 | BT40 Shrink Fit Holder 3/8" 25K | 370.0 | 10.0 | 3.95 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| BT40-SF0500-6.30 | BT40 Shrink Fit Holder 1/2" 25K | 370.0 | 9.0 | 3.95 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| BT40-SF0625-6.30 | BT40 Shrink Fit Holder 5/8" 25K | 561.0 | 1.0 | 4.95 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| BT40-SF0750-6.30 | BT40 Shrink Fit Holder 3/4" 25K | 370.0 | 2.0 | 4.95 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| BT40-SF20-100CP | BT40 Shrink Fit Holder 20mm CoolantPorts 25K | 342.0 | 4.0 | 3.30 | 8.25 | 3.00 | 3.00 | Shrink Fit Holders |
| BT40-SF5-160MT | BT40 Shrink Fit Holder 5mm Mold Type 20K | 681.0 | 9.0 | 3.00 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| BT40-TD-1-MASTER | BT40 Tool Setter TD-1 Master Gauge | 700.0 | 4.0 | 4.20 | 11.25 | 4.00 | 4.00 | Probes |
| BT40-VC6F-90 | BT40 VC6 Collet Chuck DIN 30K | 644.0 | 2.0 | 3.20 | 8.37 | 4.25 | 3.75 | VC Collet Chucks |
| BT40-WE1.1/2-110 | BT40 End Mill Holder 1.1/2" 15K | 318.0 | 77.0 | 6.95 | 8.75 | 4.50 | 4.00 | End Mill Holders |
| BT40-WE1.1/4-120 | BT40 End Mill Holder 1.1/4" 15K | 149.0 | 2.0 | 6.30 | 8.50 | 4.00 | 2.50 | End Mill Holders |
| BT40-WE1-120 | BT40 End Mill Holder 1" 15K | 149.0 | 5.0 | 6.00 | 8.50 | 4.00 | 2.75 | End Mill Holders |
| BT40-WE3/8-65 | BT40 End Mill Holder 3/8" 15K | 149.0 | 1.0 | 2.70 | 6.31 | 4.00 | 4.00 | End Mill Holders |
| BT40-WE5/16-65 | BT40 End Mill Holder 5/16" 15K | 146.0 | 5.0 | 2.75 | 6.31 | 4.00 | 2.86 | End Mill Holders |
| BT40-WE5/8-120 | BT40 End Mill Holder 5/8" 15K | 149.0 | 5.0 | 4.50 | 8.50 | 4.00 | 2.50 | End Mill Holders |
| BT40-WE5/8-65 | BT40 End Mill Holder 5/8" 15K | 146.0 | 24.0 | 3.00 | 6.25 | 4.00 | 2.62 | End Mill Holders |
| BT40-WE7/8-85 | BT40 End Mill Holder 7/8" 15K | 149.0 | 25.0 | 4.40 | 6.37 | 4.00 | 3.00 | End Mill Holders |
| BT45-WE5/16-75 | BT45 End Mill Holder 5/16" 10K | 673.0 | 1.0 | 5.45 | 8.75 | 4.50 | 4.00 | End Mill Holders |
| BT45-WE7/8-90 | BT45 End Mill Holder 7/8" 10K | 673.0 | 5.0 | 7.05 | 8.75 | 4.50 | 3.75 | End Mill Holders |
| BT50-C1.1/2-95P | BT50 Milling Chuck 1.1/2" w/StandardNut HiSpeed 15K | 1693.0 | 10.0 | 11.80 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| BT50-MOC3/4-160 | BT50 CoolantInducer OilHole FluidHead Milling Chuck 3/4" | 3097.0 | 1.0 | 14.80 | 15.25 | 10.00 | 8.50 | Coolant Inducers |
| BT50-SF0500-3.94 | BT50 Shrink Fit Holder 1/2" 25K | 501.0 | 1.0 | 9.00 | 9.00 | 4.00 | 4.00 | Shrink Fit Holders |
| BT50-SF0500-6.30 | BT50 Shrink Fit Holder 1/2" 25K | 621.0 | 6.0 | 9.60 | 11.00 | 4.00 | 3.00 | Shrink Fit Holders |
| BT50-SF0750-6.30 | BT50 Shrink Fit Holder 3/4" 25K | 1131.0 | 1.0 | 9.60 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| BT50-TD-1-MASTER | BT50 Tool Setter TD-1 Master Gauge | 998.0 | 3.0 | 13.20 | 13.00 | 5.50 | 6.00 | Probes |
| BT50-WE1.1/2-105 | BT50 End Mill Holder 1.1/2" 10K | 181.0 | 1.0 | 11.55 | 10.37 | 5.00 | 4.75 | End Mill Holders |
| BT50-WE1/2-75 | BT50 End Mill Holder 1/2" 10K | 186.0 | 6.0 | 8.80 | 8.81 | 5.00 | 4.75 | End Mill Holders |
| BT50-WE1-105 | BT50 End Mill Holder 1" 10K | 186.0 | 8.0 | 10.80 | 10.75 | 5.00 | 4.75 | End Mill Holders |
| BT50-WE3/4-75 | BT50 End Mill Holder 3/4" 10K | 186.0 | 5.0 | 9.05 | 9.00 | 5.00 | 4.75 | End Mill Holders |
| BT50-WE5/8-75 | BT50 End Mill Holder 5/8" 10K | 186.0 | 4.0 | 8.95 | 9.75 | 4.75 | 4.81 | End Mill Holders |
| C3006-1000 | CAT30 End Mill Holder 1" | 403.0 | 8.0 | 3.90 | 8.25 | 3.75 | 3.56 | End Mill Holders |
| C30-TOOLJAW | Tool Jaw CAT30 | 531.0 | 2.0 | 14.50 | 8.50 | 8.37 | 8.50 | Accessories |
| C4001-0500-11.00 | CAT40 Shell Mill Holder 1/2" | 0.0 | 2.0 | 6.80 | 15.00 | 4.50 | 4.50 | Shell Mill Holders |
| C4001-0750-9.50 | CAT40 Shell Mill Holder 3/4" | 0.0 | 1.0 | 6.50 | 14.50 | 2.75 | 2.75 | Shell Mill Holders |
| C4001-1000-1.75CP-DIN-M | CAT40 Shell Mill Holder 1" CoolantPorts DIN ChipHole_Mod | 0.0 | 1.0 | 2.50 | 2.86 | 2.86 | 7.00 | Shell Mill Holders |
| C4001-1250B | CAT40 Shell Mill Holder 1.1/4" Balanceable 24K | 298.0 | 5.0 | 4.05 | 8.25 | 3.75 | 3.75 | Shell Mill Holders |
| C4005-1375-9.19 | CAT40 Tension/Compression Tap Holder #3 | 808.0 | 1.0 | 13.10 | 14.50 | 4.00 | 3.50 | Tap Holders |
| C4006-0125B-DIN | CAT40 End Mill Holder 1/8" Balanceable DIN 24K | 257.0 | 4.0 | 2.40 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C4006-0187B-DIN | CAT40 End Mill Holder 3/16" Balanceable DIN 24K | 229.0 | 2.0 | 2.40 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C4006-0312B-DIN | CAT40 End Mill Holder 5/16" Balanceable DIN 24K | 229.0 | 9.0 | 2.40 | 8.25 | 3.68 | 3.75 | End Mill Holders |
| C4006-0375-2.50B | CAT40 End Mill Holder 3/8" Balanceable 24K | 318.0 | 6.0 | 2.40 | 8.25 | 3.50 | 3.50 | End Mill Holders |
| C4006-0375-2.50DIN | CAT40 End Mill Holder 3/8" DIN 15K | 235.0 | 17.0 | 2.40 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C4006-0375B-DIN | CAT40 End Mill Holder 3/8" Balanceable DIN 24K | 251.0 | 1.0 | 2.40 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C4006-0437-2.50DIN | CAT40 End Mill Holder 7/16" DIN 15K | 242.0 | 3.0 | 2.65 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C4006-0500-3.00B | CAT40 End Mill Holder 1/2" Balanceable 24K | 234.0 | 9.0 | 2.80 | 6.75 | 3.00 | 3.00 | End Mill Holders |
| C4006-0625B-DIN | CAT40 End Mill Holder 5/8" Balanceable DIN 24K | 156.0 | 2.0 | 2.95 | 8.25 | 3.75 | 3.68 | End Mill Holders |
| C4006-0750B-3.00 | CAT40 End Mill Holder 3/4" Balanceable 24K | 234.0 | 22.0 | 3.00 | 8.25 | 3.50 | 3.50 | End Mill Holders |
| C4006-0875B | CAT40 End Mill Holder 7/8" Balanceable 24K | 224.0 | 2.0 | 3.45 | 8.25 | 3.75 | 3.62 | End Mill Holders |
| C4006-0875B-DIN | CAT40 End Mill Holder 7/8" Balanceable DIN 24K | 170.0 | 9.0 | 3.40 | 8.31 | 3.68 | 3.68 | End Mill Holders |
| C4006-12-2.50DIN | CAT40 End Mill Holder 12mm DIN 15K | 188.0 | 2.0 | 2.65 | 8.25 | 3.62 | 3.75 | End Mill Holders |
| C4006-6-2.50DIN | CAT40 End Mill Holder 6mm DIN 15K | 188.0 | 1.0 | 2.35 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C4006-8-2.50DIN | CAT40 End Mill Holder 8mm DIN 15K | 188.0 | 9.0 | 2.40 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C4007-0008B | CAT40 ER8 Collet Chuck Mini Nut Balanceable 24K | 381.0 | 48.0 | 2.35 | 8.25 | 3.68 | 3.75 | ER Collet Chucks |
| C4007-0016B-DIN | CAT40 ER16 Collet Chuck HiTorque BearingNut Balanceable DIN 24K | 294.0 | 1.0 | 2.35 | 0.00 | 0.00 | 0.00 | ER Collet Chucks |
| C4007-0016B-DIN-M | CAT40 ER16 ColletChuck HiTorqueBearingNut Balanceable DIN_Mod 24K | 0.0 | 2.0 | 2.40 | 8.43 | 3.62 | 3.62 | ER Collet Chucks |
| C4007-0025B | CAT40 ER25 Collet Chuck HiTorque BearingNut Balanceable 24K | 617.0 | 2.0 | 3.40 | 8.25 | 3.00 | 3.00 | ER Collet Chucks |
| C4007-0250-2.25 | CAT40 TG25 Collet Chuck 18K | 351.0 | 66.0 | 2.40 | 8.25 | 3.50 | 3.50 | TG Collet Chucks |
| C4007-1000-3.50DIN | CAT40 TG100 Collet Chuck DIN 18K | 252.0 | 3.0 | 3.60 | 8.25 | 3.50 | 3.50 | TG Collet Chucks |
| C4007-1500-6.00DIN | CAT40 TG150 Collet Chuck DIN 10K | 562.0 | 14.0 | 8.05 | 9.75 | 4.75 | 4.75 | TG Collet Chucks |
| C4016-0312-4.00DIN | CAT40 End Mill Holder 5/16" DIN 15K | 273.0 | 1.0 | 2.60 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C4016-0312DIN-HB-M | CAT40 End Mill Holder 5/16" Balanced DIN_Mod 24K | 0.0 | 1.0 | 2.60 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C4016-0437-4.00 | CAT40 End Mill Holder 7/16" 15K | 204.0 | 1.0 | 3.20 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C4016-0625-4.50DIN | CAT40 End Mill Holder 5/8" DIN 15K | 253.0 | 2.0 | 3.80 | 11.12 | 4.00 | 4.12 | End Mill Holders |
| C4016-0625B | CAT40 End Mill Holder 5/8" Balanceable 24K | 260.0 | 51.0 | 3.50 | 8.25 | 3.62 | 3.75 | End Mill Holders |
| C4016-0625DIN-4.00 | CAT40 End Mill Holder 5/8" DIN 15K | 181.0 | 2.0 | 3.50 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C4016-0750-4.00B | CAT40 End Mill Holder 3/4" Balanceable 24K | 318.0 | 9.0 | 3.55 | 8.25 | 3.62 | 3.75 | End Mill Holders |
| C4016-0875-5.00DIN | CAT40 End Mill Holder 7/8" DIN 15K | 296.0 | 13.0 | 4.70 | 11.25 | 4.25 | 4.12 | End Mill Holders |
| C4016-0875B | CAT40 End Mill Holder 7/8" Balanceable 24K | 287.0 | 13.0 | 5.60 | 11.18 | 4.25 | 4.25 | End Mill Holders |
| C4016-1500-6.00DIN | CAT40 End Mill Holder 1.1/2" DIN 15K | 337.0 | 7.0 | 9.95 | 11.25 | 4.25 | 4.00 | End Mill Holders |
| C4017-0025-4.00DIN-M | CAT40 ER25 Collet Chuck HiTorque BearingNut DIN_Mod | 0.0 | 1.0 | 4.00 | 0.00 | 0.00 | 0.00 | ER Collet Chucks |
| C4017-0032B | CAT40 ER32 Collet Chuck HiTorque BearingNut Balanceable 24K | 474.0 | 1.0 | 3.75 | 11.18 | 4.12 | 4.00 | ER Collet Chucks |
| C4017-0180-6.00 | CAT40 DA180 Collet Chuck ChipHole 8K | 220.0 | 34.0 | 3.60 | 11.00 | 4.00 | 4.00 | DA Collet Chucks |
| C4017-0250-4.00 | CAT40 TG25 Collet Chuck 18K | 424.0 | 11.0 | 2.50 | 8.25 | 3.75 | 3.75 | TG Collet Chucks |
| C4026-0625-5.50 | CAT40 End Mill Holder 5/8" 15K | 210.0 | 6.0 | 4.40 | 11.25 | 4.13 | 4.25 | End Mill Holders |
| C4026-0750-5.50 | CAT40 End Mill Holder 3/4" 15K | 210.0 | 1.0 | 4.60 | 11.25 | 4.13 | 4.25 | End Mill Holders |
| C40-4500(H)GFAC-EU | Retention Knob/Pull Stud CAT40 Coolant O-ring | 35.0 | 155.0 | 0.15 | 2.00 | 1.00 | 1.00 | Pull Studs |
| C4046-0875-9.00 | CAT40 End Mill Holder 7/8" 15K | 532.0 | 6.0 | 8.40 | 15.00 | 4.50 | 3.50 | End Mill Holders |
| C40-6000(B) | Retention Knob/Pull Stud CAT40 | 70.0 | 31.0 | 0.14 | 1.25 | 1.25 | 2.62 | Pull Studs |
| C40-9000(B) | Retention Knob/Pull Stud CAT40 | 70.0 | 9.0 | 0.14 | 2.50 | 1.25 | 1.00 | Pull Studs |
| C40-MITSUI | Retention Knob/Pull Stud CAT40 | 38.0 | 49.0 | 0.10 | 1.50 | 1.50 | 2.62 | Pull Studs |
| C40S6-0187-1.38 | CAT40 End Mill Holder 3/16" Stub Length 15K | 198.0 | 11.0 | 1.95 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C40S6-0375-1.38 | CAT40 End Mill Holder 3/8" Stub Length 15K | 129.0 | 1.0 | 2.00 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C40S6-0875-1.75 | CAT40 End Mill Holder 7/8" Stub Length 15K | 133.0 | 1.0 | 2.40 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| C40SF-0625-6.30B | CAT40 Shrink Fit Holder 5/8" Balanceable 20K | 423.0 | 17.0 | 3.75 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| C40SF-0750-5.12B | CAT40 Shrink Fit Holder 3/4" Balanceable 20K | 512.0 | 3.0 | 3.95 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| C40SF-0750-6.30B | CAT40 Shrink Fit Holder 3/4" Balanceable 20K | 486.0 | 7.0 | 4.00 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| C40SF-0750-6.30BH | CAT40 Shrink Fit Holder 3/4" Haimer 20K | 512.0 | 6.0 | 4.45 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| C40SF-1000-3.94B | CAT40 Shrink Fit Holder 1" Balanceable 20K | 482.0 | 1.0 | 3.75 | 8.25 | 3.00 | 3.00 | Shrink Fit Holders |
| C40SF-1000-5.12B | CAT40 Shrink Fit Holder 1" Balanceable 20K | 512.0 | 3.0 | 4.75 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| C40SF-1000-6.30B | CAT40 Shrink Fit Holder 1" Balanceable 20K | 486.0 | 30.0 | 4.70 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| C40SF-12-160B | CAT40 Shrink Fit Holder 12mm Balanceable 20K | 501.0 | 1.0 | 3.40 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| C40SF-1250-3.94B | CAT40 Shrink Fit Holder 1.1/4" Balanceable 20K | 408.0 | 17.0 | 3.40 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| C40SF-1250-5.12B | CAT40 Shrink Fit Holder 1.1/4" Balanceable 20K | 491.0 | 10.0 | 4.30 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| C40SF-1250-6.30B | CAT40 Shrink Fit Holder 1.1/4" Balanceable 20K | 486.0 | 20.0 | 5.30 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| C40SF-1250-6.30BH | CAT40 Shrink Fit Holder 1.1/4" Haimer 20K | 512.0 | 1.0 | 5.50 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| C40SF-16-160B | CAT40 Shrink Fit Holder 16mm Balanceable 20K | 508.0 | 2.0 | 3.65 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| C40SF-32-100B | CAT40 Shrink Fit Holder 32mm Balanceable 20K | 573.0 | 1.0 | 3.40 | 8.25 | 3.00 | 3.00 | Shrink Fit Holders |
| C4501-2000-2.00 | CAT45 Shell Mill Holder 2" | 704.0 | 1.0 | 8.95 | 10.00 | 5.00 | 4.75 | Shell Mill Holders |
| C4502-1000-6.17 | CAT45 Stub Mill Arbor 1" | 717.0 | 12.0 | 6.90 | 12.00 | 5.17 | 5.00 | Stub Mill Holders |
| C4502-1250-6.29 | CAT45 Stub Mill Arbor 1.1/4" | 551.0 | 5.0 | 7.85 | 12.00 | 5.12 | 5.12 | Stub Mill Holders |
| C4503-0002-1.61 | CAT45 JT2 Jacobs Drill Chuck Adapter | 367.0 | 1.0 | 4.65 | 12.00 | 5.12 | 5.00 | Jacobs Taper Adapter |
| C4503-0006-1.61 | CAT45 JT6 Jacobs Drill Chuck Adapter | 247.0 | 3.0 | 4.70 | 9.81 | 5.00 | 4.75 | Jacobs Taper Adapter |
| C4503-0033-1.61 | CAT45 JT33 Jacobs Drill Chuck Adapter | 349.0 | 7.0 | 4.60 | 12.00 | 5.12 | 5.12 | Jacobs Taper Adapter |
| C4505-1375-9.19 | CAT45 Tension/Compression Tap Holder #3 | 1257.0 | 5.0 | 15.20 | 13.20 | 5.62 | 5.50 | Tap Holders |
| C4506-0125-2.36 | CAT45 End Mill Holder 1/8" | 251.0 | 4.0 | 4.50 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| C4506-0187-2.50 | CAT45 End Mill Holder 3/16" | 347.0 | 9.0 | 4.50 | 12.00 | 5.12 | 5.12 | End Mill Holders |
| C4506-0250-2.50 | CAT45 End Mill Holder 1/4" | 310.0 | 1.0 | 4.50 | 12.00 | 5.12 | 5.12 | End Mill Holders |
| C4506-0875-3.50 | CAT45 End Mill Holder 7/8" | 215.0 | 5.0 | 5.60 | 12.00 | 5.12 | 5.12 | End Mill Holders |
| C4506-2000-5.50 | CAT45 End Mill Holder 2" | 406.0 | 1.0 | 13.35 | 13.00 | 5.75 | 5.50 | End Mill Holders |
| C4507-0750-3.50 | CAT45 TG75 Collet Chuck | 242.0 | 17.0 | 5.15 | 12.00 | 5.12 | 5.00 | TG Collet Chucks |
| C45-4500 | Retention Knob/Pull Stud CAT45 | 36.0 | 32.0 | 0.20 | 3.81 | 1.56 | 1.75 | Pull Studs |
| C45-6000 | Retention Knob/Pull Stud CAT45 | 32.0 | 67.0 | 0.30 | 1.56 | 1.56 | 3.81 | Pull Studs |
| C45-9000 | Retention Knob/Pull Stud CAT45 | 36.0 | 39.0 | 0.30 | 1.50 | 1.50 | 3.81 | Pull Studs |
| C45BH-0875-1.75 | CAT45 Threaded Boring Head Holder 7/8-20 | 294.0 | 6.0 | 4.85 | 12.00 | 5.12 | 5.00 | Male Threaded Boring |
| C45BH-1500-1.75 | CAT45 Threaded Boring Head Holder 1.1/2-18 | 295.0 | 1.0 | 5.50 | 12.00 | 5.00 | 5.12 | Male Threaded Boring |
| C5001-1000-1.75CP-DIN-M | CAT50 Shell Mill Holder 1" CoolantPorts ChipHole DIN_Mod | 0.0 | 2.0 | 7.80 | 4.50 | 4.00 | 10.00 | Shell Mill Holders |
| C5001-1000DIN-M | CAT50 Shell Mill Holder 1" DIN_Mod | 0.0 | 1.0 | 7.50 | 9.75 | 4.75 | 4.75 | Shell Mill Holders |
| C5001-1250B | CAT50 Shell Mill Holder 1.1/4" Balanceable 15K | 339.0 | 7.0 | 8.20 | 9.75 | 4.75 | 4.75 | Shell Mill Holders |
| C5001-1500B | CAT50 Shell Mill Holder 1.1/2" Balanceable 15K | 192.0 | 4.0 | 9.50 | 9.81 | 4.86 | 4.75 | Shell Mill Holders |
| C5003-0002-1.61 | CAT50 JT2 Jacobs Drill Chuck Adapter | 190.0 | 11.0 | 7.20 | 9.75 | 4.75 | 4.75 | Jacobs Taper Adapter |
| C5006-0250-2.50DIN | CAT50 End Mill Holder 1/4" DIN 10K | 336.0 | 5.0 | 6.92 | 9.75 | 4.86 | 4.75 | End Mill Holders |
| C5006-0250B-DIN | CAT50 End Mill Holder 1/4" Balanceable DIN 15K | 341.0 | 8.0 | 6.95 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| C5006-0312-2.50DIN | CAT50 End Mill Holder 5/16" DIN 10K | 336.0 | 3.0 | 6.80 | 9.87 | 4.81 | 4.75 | End Mill Holders |
| C5006-0375-2.50DIN | CAT50 End Mill Holder 3/8" DIN 10K | 318.0 | 14.0 | 6.94 | 9.75 | 4.86 | 4.75 | End Mill Holders |
| C5006-0375A-2.81 | CAT50 Aerospace End Mill Holder 3/8" | 311.0 | 64.0 | 7.55 | 9.75 | 4.75 | 4.75 | End Mill Holders Aer |
| C5006-0375B | CAT50 End Mill Holder 3/8" Balanceable 15K | 292.0 | 8.0 | 6.90 | 9.75 | 4.83 | 4.75 | End Mill Holders |
| C5006-0375B-DIN | CAT50 End Mill Holder 3/8" Balanceable DIN 15K | 341.0 | 20.0 | 6.90 | 9.81 | 4.75 | 4.81 | End Mill Holders |
| C5006-0437-2.50DIN | CAT50 End Mill Holder 7/16" DIN 10K | 318.0 | 9.0 | 7.10 | 9.75 | 4.86 | 4.75 | End Mill Holders |
| C5006-0500A-2.73 | CAT50 Aerospace End Mill Holder 1/2" | 311.0 | 16.0 | 7.70 | 9.75 | 4.75 | 4.75 | End Mill Holders Aer |
| C5006-0500B | CAT50 End Mill Holder 1/2" Balanceable 15K | 251.0 | 15.0 | 7.32 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| C5006-0500B-DIN | CAT50 End Mill Holder 1/2" Balanceable DIN 15K | 341.0 | 21.0 | 7.20 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| C5006-0625-3.00DIN | CAT50 End Mill Holder 5/8" DIN 10K | 336.0 | 14.0 | 7.44 | 9.87 | 4.81 | 4.75 | End Mill Holders |
| C5006-0625B-DIN | CAT50 End Mill Holder 5/8" Balanceable DIN 15K | 341.0 | 8.0 | 7.40 | 11.25 | 4.25 | 4.12 | End Mill Holders |
| C5006-0875A-2.63 | CAT50 Aerospace End Mill Holder 7/8" | 354.0 | 17.0 | 8.05 | 9.75 | 4.75 | 4.75 | End Mill Holders Aer |
| C5006-0875B-DIN | CAT50 End Mill Holder 7/8" Balanceable DIN 15K | 351.0 | 7.0 | 8.35 | 9.81 | 4.75 | 4.75 | End Mill Holders |
| C5006-1000A-3.562 | CAT50 Aerospace End Mill Holder 1" MB.37527 10K | 688.0 | 4.0 | 9.10 | 9.75 | 4.75 | 4.75 | End Mill Holders Aer |
| C5006-1000B-DIN | CAT50 End Mill Holder 1" Balanceable DIN 15K | 246.0 | 6.0 | 8.95 | 9.81 | 4.81 | 4.75 | End Mill Holders |
| C5006-1500A-3.625 | CAT50 Aerospace End Mill Holder 1.1/2" GKN Unv135 | 373.0 | 45.0 | 9.95 | 9.75 | 4.82 | 4.75 | End Mill Holders Aer |
| C5006-2500A-5.35 | CAT50 Aerospace End Mill Holder 2.1/2" | 666.0 | 4.0 | 22.95 | 16.00 | 6.00 | 5.00 | End Mill Holders Aer |
| C5007-0008-5.00DIN | CAT50 ER8 Collet Chuck Mini Nut DIN 10K | 680.0 | 1.0 | 7.15 | 13.00 | 5.06 | 5.62 | ER Collet Chucks |
| C5007-0011B | CAT50 ER11 Collet Chuck HexNut Balanceable 15K | 411.0 | 13.0 | 6.80 | 9.81 | 4.75 | 4.75 | ER Collet Chucks |
| C5007-0016B | CAT50 ER16 Collet Chuck HiTorque BearingNut Balanceable 15K | 418.0 | 18.0 | 6.90 | 9.86 | 4.93 | 4.75 | ER Collet Chucks |
| C5007-0016B-DIN | CAT50 ER16 Collet Chuck HiTorque BearingNut Balanceable DIN 15K | 476.0 | 52.0 | 7.00 | 10.00 | 4.75 | 5.00 | ER Collet Chucks |
| C5007-0020-2.50DIN | CAT50 ER20 Collet Chuck HiTorque BearingNut DIN ChipHole 10K | 400.0 | 25.0 | 7.20 | 9.86 | 4.75 | 4.75 | ER Collet Chucks |
| C5007-0025B-DIN | CAT50 ER25 Collet Chuck HiTorque BearingNut Balanceable DIN 15K | 692.0 | 2.0 | 7.10 | 9.75 | 4.75 | 4.75 | ER Collet Chucks |
| C5007-0500-2.50 | CAT50 TG50 Collet Chuck 10K | 456.0 | 30.0 | 7.16 | 9.75 | 4.75 | 4.75 | TG Collet Chucks |
| C5007-0750B | CAT50 TG75 Collet Chuck Balanceable 15K | 375.0 | 6.0 | 7.60 | 9.75 | 4.75 | 4.75 | TG Collet Chucks |
| C5011-1500B | CAT50 Shell Mill Holder 1.1/2" Balanceable 15K | 378.0 | 1.0 | 15.70 | 13.00 | 5.62 | 5.50 | Shell Mill Holders |
| C5016-0250B | CAT50 End Mill Holder 1/4" Balanceable 15K | 284.0 | 4.0 | 7.10 | 9.83 | 4.75 | 4.75 | End Mill Holders |
| C5016-0312-4.00 | CAT50 End Mill Holder 5/16" 10K | 232.0 | 5.0 | 7.00 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| C5016-0375-4.00DIN | CAT50 End Mill Holder 3/8" DIN 10K | 333.0 | 2.0 | 7.20 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| C5016-0375B | CAT50 End Mill Holder 3/8" Balanceable 15K | 251.0 | 2.0 | 7.05 | 9.75 | 4.81 | 4.81 | End Mill Holders |
| C5016-0437-4.00 | CAT50 End Mill Holder 7/16" 10K | 234.0 | 10.0 | 7.60 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| C5016-0437-4.00DIN | CAT50 End Mill Holder 7/16" DIN 10K | 333.0 | 2.0 | 7.60 | 9.81 | 4.81 | 4.75 | End Mill Holders |
| C5016-0750B | CAT50 End Mill Holder 3/4" Balanceable 15K | 357.0 | 3.0 | 9.70 | 9.75 | 4.81 | 4.81 | End Mill Holders |
| C5016-0875A-4.50 | CAT50 Aerospace End Mill Holder 7/8" | 501.0 | 3.0 | 9.80 | 10.00 | 5.00 | 5.00 | End Mill Holders Aer |
| C5016-0875B | CAT50 End Mill Holder 7/8" Balanceable 15K | 342.0 | 1.0 | 9.95 | 13.00 | 5.62 | 5.50 | End Mill Holders |
| C5016-2000-8.00 | CAT50 End Mill Holder 2" 10K | 269.0 | 14.0 | 24.65 | 16.00 | 6.00 | 5.00 | End Mill Holders |
| C5016-2000A-7.35 | CAT50 Aerospace End Mill Holder 2" | 471.0 | 4.0 | 20.40 | 16.00 | 6.00 | 5.00 | End Mill Holders Aer |
| C5017-0025-4.00DIN | CAT50 ER25 Collet Chuck HiTorque BearingNut DIN ChipHole | 405.0 | 2.0 | 7.80 | 10.00 | 5.00 | 5.00 | ER Collet Chucks |
| C5017-0025B | CAT50 ER25 Collet Chuck HiTorque BearingNut Balanceable 15K | 515.0 | 12.0 | 7.45 | 9.75 | 4.75 | 4.75 | ER Collet Chucks |
| C5017-0040-6.00DIN | CAT50 ER40 Collet Chuck HiTorque BearingNut DIN ChipHole 10K | 531.0 | 19.0 | 11.60 | 13.00 | 5.50 | 5.50 | ER Collet Chucks |
| C5017-0040B | CAT50 ER40 Collet Chuck HiTorque BearingNut Balanceable 15K | 586.0 | 3.0 | 9.80 | 13.00 | 5.50 | 5.50 | ER Collet Chucks |
| C5017-1000B | CAT50 TG100 Collet Chuck Balanceable 15K | 392.0 | 12.0 | 9.50 | 13.00 | 5.50 | 5.50 | TG Collet Chucks |
| C5026-0312-6.00DIN-M | CAT50 End Mill Holder 5/16" DIN_Mod | 0.0 | 1.0 | 7.40 | 0.00 | 0.00 | 0.00 | End Mill Holders |
| C5026-0375-6.00DIN | CAT50 End Mill Holder 3/8" DIN 10K | 380.0 | 2.0 | 7.70 | 13.00 | 5.68 | 5.62 | End Mill Holders |
| C5026-0375B | CAT50 End Mill Holder 3/8" Balanceable 15K | 387.0 | 12.0 | 7.50 | 13.00 | 5.62 | 5.50 | End Mill Holders |
| C5026-0437-6.00DIN | CAT50 End Mill Holder 7/16" DIN 10K | 413.0 | 2.0 | 8.20 | 13.00 | 5.68 | 5.50 | End Mill Holders |
| C5026-0625-6.00DIN | CAT50 End Mill Holder 5/8" DIN 10K | 387.0 | 8.0 | 8.90 | 13.00 | 5.50 | 5.50 | End Mill Holders |
| C5026-0875A-6.50 | CAT50 Aerospace End Mill Holder 7/8" | 527.0 | 9.0 | 11.85 | 13.00 | 5.50 | 5.50 | End Mill Holders Aer |
| C5026-1250-8.00 | CAT50 End Mill Holder 1.1/4" 10K | 299.0 | 3.0 | 15.00 | 15.50 | 6.00 | 6.00 | End Mill Holders |
| C5026-1500-9.00DIN | CAT50 End Mill Holder 1.1/2" DIN 10K | 524.0 | 5.0 | 19.90 | 16.00 | 5.81 | 5.50 | End Mill Holders |
| C5027-0020-6.00DIN | CAT50 ER20 Collet Chuck HiTorque BearingNut DIN ChipHole 10K | 477.0 | 1.0 | 8.40 | 13.00 | 5.50 | 5.50 | ER Collet Chucks |
| C5027-0040-8.00DIN | CAT50 ER40 Collet Chuck HiTorque BearingNut DIN ChipHole 10K | 519.0 | 6.0 | 15.00 | 16.00 | 6.00 | 6.00 | ER Collet Chucks |
| C5036-0375-8.00 | CAT50 End Mill Holder 3/8" 10K | 367.0 | 10.0 | 9.60 | 16.00 | 6.00 | 5.00 | End Mill Holders |
| C5036-0625-8.00 | CAT50 End Mill Holder 5/8" 10K | 367.0 | 1.0 | 12.40 | 15.50 | 6.00 | 6.00 | End Mill Holders |
| C5037-0020-8.00 | CAT50 ER20 Collet Chuck HiTorque BearingNut ChipHole 10K | 447.0 | 10.0 | 11.20 | 16.00 | 6.00 | 6.00 | ER Collet Chucks |
| C50-4500(B) | Retention Knob/Pull Stud CAT50 | 75.0 | 2.0 | 0.60 | 4.00 | 1.50 | 1.50 | Pull Studs |
| C50-MAZAK | Retention Knob/Pull Stud CAT50 | 67.0 | 99.0 | 0.60 | 4.00 | 1.50 | 1.50 | Pull Studs |
| C50-PS-855S | Retention Knob/Pull Stud CAT50 Coolant | 103.0 | 72.0 | 0.45 | 1.56 | 1.56 | 3.86 | Pull Studs |
| C50S6-0375-1.38 | CAT50 End Mill Holder 3/8" Stub Length 10K | 259.0 | 7.0 | 5.90 | 10.00 | 5.00 | 5.00 | End Mill Holders |
| C50S6-0500-1.75 | CAT50 End Mill Holder 1/2" Stub Length 10K | 225.0 | 12.0 | 6.20 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| C50S6-0625-1.75 | CAT50 End Mill Holder 5/8" Stub Length 10K | 225.0 | 2.0 | 6.20 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| C50S6-2000A | CAT50 Aerospace End Mill Holder 2" ChipHole Knurling 10K | 690.0 | 1.0 | 13.00 | 9.81 | 4.75 | 4.75 | End Mill Holders Aer |
| C50S6-2000MN-M | CAT50 End Mill Holder 2" Stub Length _Mod 10K | 0.0 | 1.0 | 10.05 | 9.75 | 4.86 | 4.75 | End Mill Holders |
| C50SF-0250-3.15B | CAT50 Shrink Fit Holder 1/4" Balanceable 18K | 591.0 | 1.0 | 6.10 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| C50SF-0625A-6.30B | CAT50 Shrink Fit Holder 5/8" Balanceable 18K | 971.0 | 8.0 | 8.20 | 13.00 | 4.00 | 4.00 | Shrink Fit Holders |
| C50SF-1250-3.94B | CAT50 Shrink Fit Holder 1.1/4" Balanceable 18K | 555.0 | 10.0 | 7.90 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| C50SF-1250-6.30B | CAT50 Shrink Fit Holder 1.1/4" Balanceable 18K | 594.0 | 59.0 | 10.10 | 13.00 | 4.00 | 4.00 | Shrink Fit Holders |
| C50SF-1250A-3.94B | CAT50 Shrink Fit Holder 1.1/4" Balanceable 18K | 581.0 | 8.0 | 7.30 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| C50SF-12-80B | CAT50 Shrink Fit Holder 12mm Balanceable 18K | 526.0 | 20.0 | 6.40 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| C50SF-12-80BH | CAT50 Shrink Fit Holder 12mm Haimer 18K | 6.0 | 5.0 | 6.50 | 9.00 | 4.00 | 4.00 | Shrink Fit Holders |
| C50SF-16-160 | CAT50 Shrink Fit Holder 16mm 18K | 591.0 | 1.0 | 8.65 | 13.00 | 4.00 | 4.00 | Shrink Fit Holders |
| C50SF-25-100B | CAT50 Shrink Fit Holder 25mm Balanceable 18K | 538.0 | 10.0 | 8.20 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| C50SF-32-100B | CAT50 Shrink Fit Holder 32mm Balanceable 18K | 541.0 | 8.0 | 7.85 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| C50SF-32-160B | CAT50 Shrink Fit Holder 32mm Balanceable 18K | 618.0 | 2.0 | 10.05 | 13.00 | 4.00 | 4.00 | Shrink Fit Holders |
| CAT40-C1.1/4SL-105UB | CAT40 Milling Chuck 1.1/4" Nose=69 8K | 725.0 | 4.0 | 5.66 | 10.00 | 5.00 | 3.50 | Milling Chucks |
| CAT40-MMC12-120U | CAT40 MMC Mini Chuck 12mm BevelGear 30K | 653.0 | 4.0 | 4.00 | 8.50 | 4.50 | 3.75 | MMC Collet Chucks |
| CAT40-MMC12F-120U | CAT40 MMC Mini Chuck 12mm BevelGear DIN 30K | 910.0 | 18.0 | 4.00 | 8.50 | 4.50 | 3.75 | MMC Collet Chucks |
| CAT40-MMC12F-120U-M | CAT40 MMC Mini Chuck 12mm BevelGear DIN_Mod 30K | 0.0 | 11.0 | 4.00 | 8.50 | 4.50 | 3.75 | MMC Collet Chucks |
| CAT40-MMC8F-120U-IDU | CAT40 MMC Mini Chuck 10mm BevelGear DIN ChipHole 30K | 919.0 | 4.0 | 3.41 | 9.25 | 4.00 | 4.00 | MMC Collet Chucks |
| CAT40-MTA3-135 | CAT40 Morse Taper MT3 Adapter | 247.0 | 2.0 | 4.05 | 8.50 | 4.00 | 2.75 | Morse Taper Adapters |
| CAT40N-MDSK10-75U | CAT40 Major Dream Slim Chuck SK10 NonANSI 20K | 693.0 | 1.0 | 3.20 | 8.50 | 5.00 | 5.00 | SK Slim Chuck Holder |
| CAT40N-MDSK16-65U | CAT40 Major Dream Slim Chuck SK16 NonANSI 20K | 688.0 | 6.0 | 3.08 | 8.50 | 5.00 | 5.00 | SK Slim Chuck Holder |
| CAT40N-MDSK16-65UP | CAT40 Major Dream Slim Chuck SK16 NonANSI 25K | 779.0 | 13.0 | 3.08 | 8.50 | 5.00 | 5.00 | SK Slim Chuck Holder |
| CAT40-SF0187-6.30MT | CAT40 Shrink Fit Holder 3/16" Mold Type 25K | 0.0 | 1.0 | 2.65 | 3.00 | 3.00 | 9.00 | Shrink Fit Holders |
| CAT40-SF0250-6.30B | CAT40 Shrink Fit Holder 1/4" Balanceable 25K | 713.0 | 8.0 | 3.10 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| CAT40-SF0312-3.15CP-SP | CAT40 Shrink Fit Holder 5/16" Nose27/BoreDepth36 CoolantPorts 25K | 478.0 | 19.0 | 2.50 | 6.00 | 3.00 | 3.00 | Shrink Fit Holders |
| CAT40-SF0500-4.00-SP | CAT40 Shrink Fit Holder 1/2" Nose=.79 25K | 0.0 | 2.0 | 2.50 | 7.00 | 3.00 | 3.00 | Shrink Fit Holders |
| CAT40-SF0625-3.15MT | CAT40 Shrink Fit Holder 5/8" Mold Type 25K | 332.0 | 1.0 | 2.40 | 6.00 | 3.00 | 3.00 | Shrink Fit Holders |
| CAT40-SF0750-3.15 | CAT40 Shrink Fit Holder 3/4" 25K | 311.0 | 1.0 | 2.80 | 6.00 | 3.00 | 3.00 | Shrink Fit Holders |
| CAT40-SF0750-6.30 | CAT40 Shrink Fit Holder 3/4" 25K | 329.0 | 19.0 | 4.80 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| CAT40-SF12-160 | CAT40 Shrink Fit Holder 12mm 25K | 288.0 | 1.0 | 4.80 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| CAT40-SF32-100 | CAT40 Shrink Fit Holder 32mm 25K | 322.0 | 5.0 | 3.75 | 8.25 | 3.00 | 3.00 | Shrink Fit Holders |
| CAT40-SF32-160B | CAT40 Shrink Fit Holder 32mm Balanceable 25K | 679.0 | 12.0 | 5.95 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| CAT40-SF6-6.00-SP | CAT40 Shrink Fit Holder 6mm Nose=.47 25K | 0.0 | 1.0 | 4.05 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| CAT40-SK10F-150U | CAT40 Slim Chuck SK10 DIN 20K | 625.0 | 1.0 | 4.18 | 9.50 | 5.00 | 5.00 | SK Slim Chuck Holder |
| CAT40-SK20-90U | CAT40 Slim Chuck SK20 20K | 498.0 | 1.0 | 3.96 | 8.50 | 5.00 | 5.00 | SK Slim Chuck Holder |
| CAT40-TD-1-MASTER | CAT40 Tool Setter TD1 Master Gauge | 622.0 | 1.0 | 4.10 | 11.25 | 0.25 | 4.25 | Probes |
| CAT40U-MOL3/4-140 | CAT40 CoolantInducer OilHole FluidHead SideLock 3/4" | 3080.0 | 1.0 | 8.95 | 13.25 | 8.50 | 7.12 | Coolant Inducers |
| CAT40-VC13F-120U-M | Factory Quote Only DIN 30K VC13 | 0.0 | 3.0 | 4.35 | 10.43 | 4.93 | 3.25 | VC Collet Chucks |
| CAT40-VC6F-60U | CAT40 VC6 Collet Chuck DIN 30K | 931.0 | 7.0 | 3.00 | 8.50 | 4.50 | 3.75 | VC Collet Chucks |
| CAT40-WE1/4A-65U | CAT40 End Mill Holder 1/4" 15K | 262.0 | 1.0 | 2.90 | 8.25 | 4.25 | 3.75 | End Mill Holders |
| CAT45-C3/4-115UG | CAT45 Milling Chuck 3/4" HiSpeed 20K | 1442.0 | 2.0 | 8.00 | 12.00 | 6.50 | 4.56 | Milling Chucks |
| CAT50-C1.1/4-90UG-IDU | CAT50 Milling Chuck 1.1/4" HiSpeed ChipHole 15K | 824.0 | 7.0 | 10.56 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| CAT50-C1.1/4F-105UG | CAT50 Milling Chuck 1.1/4" HiSpeed DIN 15K | 945.0 | 1.0 | 10.56 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| CAT50-C1.1/4F-135U-IDU-M | CAT50 Milling Chuck 1.1/4" DIN ChipHole_Mod 6K | 0.0 | 1.0 | 12.15 | 12.00 | 6.00 | 4.50 | Milling Chucks |
| CAT50-C1.1/4F-165UG | CAT50 Milling Chuck 1.1/4" HiSpeed DIN 15K | 819.0 | 6.0 | 14.19 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| CAT50-C3/4F-105U-IDU-M | CAT50 Milling Chuck 3/4" DIN ChipHole_Mod 8K | 0.0 | 1.0 | 10.67 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| CAT50-FMD50.8-75U | CAT50 Shell Mill Holder 2" | 474.0 | 2.0 | 16.39 | 12.00 | 5.12 | 4.63 | Shell Mill Holders |
| CAT50-MMC12-120U-A | CAT50 MMC Mini Chuck 12mm DrawBar 20K | 489.0 | 1.0 | 9.60 | 11.00 | 5.00 | 4.50 | MMC Collet Chucks |
| CAT50-MMC12F-135U | CAT50 MMC Mini Chuck 12mm BevelGear DIN 20K | 967.0 | 5.0 | 9.90 | 12.00 | 5.00 | 5.00 | MMC Collet Chucks |
| CAT50-MMC8-195U | CAT50 MMC Mini Chuck 10mm BevelGear 20K | 1248.0 | 1.0 | 9.10 | 13.25 | 5.00 | 4.75 | MMC Collet Chucks |
| CAT50-NC5-85-45U | CAT50 Dream Cut Holder | 368.0 | 1.0 | 9.70 | 9.75 | 4.86 | 4.75 | NC5 |
| CAT50N-MDQ26-80U | CAT50 Major Dream Boring Base/Master Holder NonANSI | 969.0 | 1.0 | 10.60 | 11.81 | 5.00 | 4.75 | Modular Master Holde |
| CAT50-PBH11-85 | CAT50 Metrol Probe Base Holder | 238.0 | 21.0 | 7.25 | 0.00 | 0.00 | 0.00 | Probes |
| CAT50-Q42-125U | CAT50 Boring Base/Master Holder | 708.0 | 2.0 | 14.30 | 10.75 | 5.00 | 4.68 | Modular Master Holde |
| CAT50-SF0625-6.30 | CAT50 Shrink Fit Holder 5/8" 25K | 541.0 | 1.0 | 8.00 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| CAT50-SF1000-3.94 | CAT50 Shrink Fit Holder 1" 25K | 428.0 | 2.0 | 8.20 | 9.00 | 4.00 | 4.00 | Shrink Fit Holders |
| CAT50-SF1000-5.12 | CAT50 Shrink Fit Holder 1" 25K | 515.0 | 15.0 | 9.20 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| CAT50-SF1000-6.30 | CAT50 Shrink Fit Holder 1" 25K | 541.0 | 4.0 | 10.60 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| CAT50-SF1250-5.12 | CAT50 Shrink Fit Holder 1.1/4" 25K | 531.0 | 21.0 | 9.00 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| CAT50-SF1250-6.30 | CAT50 Shrink Fit Holder 1.1/4" 25K | 606.0 | 7.0 | 10.20 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| CAT50-SF16-160 | CAT50 Shrink Fit Holder 16mm 25K | 602.0 | 2.0 | 8.01 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| CAT50-SK16CF-165U | CAT50 Slim Chuck SK16 DIN AD/B 10K | 889.0 | 128.0 | 10.05 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| CAT50-TD-1-MASTER | CAT50 Tool Setter TD-1 Master Gauge | 981.0 | 7.0 | 12.20 | 13.25 | 5.62 | 5.50 | Probes |
| CAT50-VC13F-165U | CAT50 VC13 Collet Chuck DIN 20K | 748.0 | 21.0 | 10.78 | 11.81 | 5.00 | 4.75 | VC Collet Chucks |
| CAT50-VC6-165U | CAT50 VC6 Collet Chuck 20K | 728.0 | 3.0 | 9.13 | 11.75 | 5.00 | 4.75 | VC Collet Chucks |
| CAT50-VC6F-135U | CAT50 VC6 Collet Chuck DIN 20K | 741.0 | 12.0 | 8.91 | 10.68 | 5.00 | 4.75 | VC Collet Chucks |
| CAT50-VC6F-165U | CAT50 VC6 Collet Chuck DIN 20K | 755.0 | 2.0 | 9.40 | 12.00 | 5.00 | 4.75 | VC Collet Chucks |
| CAT50-WE3/8-75 | CAT50 End Mill Holder 3/8" 10K | 189.0 | 1.0 | 7.60 | 9.00 | 5.00 | 4.75 | End Mill Holders |
| CAT50-ZL12-115U | CAT50 Tension/Compression Tap Holder #1 Depth Control | 674.0 | 3.0 | 9.35 | 10.75 | 5.00 | 4.68 | Tap Holders |
| CAT50-ZL16-135U | CAT50 Tension/Compression Tap Holder Depth Control Z16 | 756.0 | 2.0 | 10.05 | 12.00 | 5.00 | 4.75 | Tap Holders |
| CCK32-9/16 | Straight Coolant Collet/Sleeve OD 32mm ID 9/16" | 130.0 | 16.0 | 0.62 | 3.75 | 1.75 | 1.75 | KM Collets |
| CKFN20(3/4)-16C | CCK Coolant Seal Nut/Cap OD 20mm(3/4") ID 16mm | 67.0 | 7.0 | 0.07 | 1.75 | 1.75 | 0.50 | KM Caps |
| CKFN20(3/4)-3/16C | CCK Coolant Seal Nut/Cap OD 20mm(3/4") ID 3/16" | 65.0 | 10.0 | 0.09 | 1.75 | 1.75 | 0.50 | KM Caps |
| CKFN25(1)-1/4MN | CCK Coolant Jet Nozzle Nut/Cap OD 25mm(1") ID 1/4" " | 249.0 | 11.0 | 0.20 | 2.50 | 3.00 | 2.50 | KM Caps |
| CKFN25(1)-14 | CCK Coolant Jet Slot Nut/Cap OD 25mm(1") ID 14mm | 62.0 | 6.0 | 0.11 | 2.25 | 2.25 | 1.00 | KM Caps |
| CKFN32(1.1/4)-1/2MN | CCK Coolant Jet Nozzle Nut/Cap OD 32mm(1.1/4") ID 1/2" | 244.0 | 12.0 | 0.33 | 2.50 | 2.50 | 3.00 | KM Caps |
| CKFN32(1.1/4)-12MN | CCK Coolant Jet Nozzle Nut/Cap OD 32mm(1.1/4") ID 12mm | 217.0 | 8.0 | 0.44 | 2.50 | 2.50 | 3.00 | KM Caps |
| CKFN32(1.1/4)-9/16C | CCK Coolant Seal Nut/Cap OD 32mm(1.1/4") ID 9/16" | 85.0 | 13.0 | 0.15 | 2.25 | 2.25 | 1.00 | KM Caps |
| CRE-1/0 | Tap Collet Reducer 1/0 | 108.0 | 1.0 | 0.25 | 2.25 | 1.50 | 1.50 | Tap Collets |
| DRAWBAR-OKUMA | Draw Bar for Power Chuck Okuma | 2446.0 | 2.0 | 24.45 | 7.50 | 36.00 | 6.25 | Accessories |
| E20-KITRACK | Rack ER20 | 64.0 | 18.0 | 1.60 | 10.00 | 5.25 | 2.12 | Accessories |
| E32-KITRACK | Rack ER32 | 117.0 | 2.0 | 2.15 | 10.50 | 8.00 | 2.25 | Accessories |
| E50-1023 | ER50 Collet 26.0mm (1.024-.984) | 147.0 | 1.0 | 1.20 | 3.50 | 2.25 | 2.25 | ER Collets |
| E50-1062 | ER50 Collet 27.0mm (1.063-1.024) | 220.0 | 1.0 | 1.20 | 2.31 | 2.25 | 3.37 | ER Collets |
| E50-1102 | ER50 Collet 28.0mm (1.102-1.024) | 220.0 | 10.0 | 1.20 | 3.50 | 2.25 | 2.31 | ER Collets |
| E50-1141 | ER50 Collet 29.0mm (1.142-1.102) | 220.0 | 2.0 | 1.20 | 2.25 | 2.25 | 3.50 | ER Collets |
| E50-1181 | ER50 Collet 30.0mm (1.181-1.102) | 147.0 | 4.0 | 1.20 | 3.50 | 2.25 | 2.25 | ER Collets |
| E50-1220 | ER50 Collet 31.0mm (1.220-1.181) | 234.0 | 4.0 | 1.20 | 2.52 | 2.25 | 3.37 | ER Collets |
| E50-1299 | ER50 Collet 33.0mm (1.299-1.260) | 183.0 | 2.0 | 1.20 | 2.25 | 2.25 | 3.43 | ER Collets |
| E50-511 | ER50 Collet 13.0mm (.512-.472) | 147.0 | 7.0 | 1.20 | 3.50 | 2.25 | 2.25 | ER Collets |
| E50-669 | ER50 Collet 17.0mm (.669-.630) | 147.0 | 8.0 | 1.20 | 3.50 | 2.25 | 2.25 | ER Collets |
| E50-708 | ER50 Collet 18.0mm (.709-.630) | 147.0 | 9.0 | 1.20 | 3.50 | 2.25 | 2.25 | ER Collets |
| E50-826 | ER50 Collet 21.0mm (.827-.787) | 147.0 | 4.0 | 1.20 | 3.50 | 2.25 | 2.25 | ER Collets |
| E50-866 | ER50 Collet 22.0mm (.866-.787) | 147.0 | 5.0 | 1.20 | 3.50 | 2.25 | 2.25 | ER Collets |
| E50-944 | ER50 Collet 24.0mm (.945-.866) | 147.0 | 4.0 | 1.20 | 3.50 | 2.25 | 2.25 | ER Collets |
| E50-984 | ER50 Collet 25.0mm (.984-.945) | 147.0 | 9.0 | 1.20 | 3.50 | 2.25 | 2.25 | ER Collets |
| ETS14-157 | 4.0mm ETS Pibomulti Collet | 137.0 | 1.0 | 0.10 | 1.25 | 2.67 | 1.25 | ETS |
| ETS14-177 | 4.5mm ETS Pibomulti Collet | 137.0 | 4.0 | 0.10 | 1.25 | 2.62 | 1.25 | ETS |
| ETS14-196 | 5.0mm ETS Pibomulti Collet | 144.0 | 2.0 | 0.10 | 1.25 | 2.62 | 1.12 | ETS |
| ETS14-216 | 5.5mm ETS Pibomulti Collet | 137.0 | 4.0 | 0.10 | 1.25 | 2.75 | 1.25 | ETS |
| ETS14-236 | 6.0mm ETS Pibomulti Collet | 144.0 | 2.0 | 0.10 | 1.25 | 2.62 | 1.25 | ETS |
| ETS14-275 | 7.0mm ETS Pibomulti Collet | 144.0 | 5.0 | 0.10 | 1.25 | 2.62 | 1.25 | ETS |
| ETS14-295 | 7.5mm ETS Pibomulti Collet | 137.0 | 2.0 | 0.10 | 1.25 | 2.62 | 1.25 | ETS |
| H100A-SF10-90MT | HSK100A Shrink Fit Holder 10mm Mold Type 18K | 807.0 | 4.0 | 5.40 | 8.50 | 4.00 | 4.00 | Shrink Fit Holders |
| H100A-SF16-100MT | HSK100A Shrink Fit Holder 16mm Mold Type 25K | 566.0 | 5.0 | 5.55 | 8.50 | 4.00 | 4.00 | Shrink Fit Holders |
| H100A-SF16-160MT | HSK100A Shrink Fit Holder 16mm Mold Type ChipHole 25K | 1064.0 | 5.0 | 6.35 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H100A-SF25-160 | HSK100A Shrink Fit Holder 25mm 25K | 582.0 | 8.0 | 9.10 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H100A-SF4-130CP | HSK100A Shrink Fit Holder 4mm CoolantPorts ChipHole 25K | 689.0 | 8.0 | 5.30 | 9.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H100A-SF4-85MT | HSK100A Shrink Fit Holder 4mm Mold Type ChipHole 25K | 653.0 | 10.0 | 4.95 | 8.50 | 4.00 | 4.00 | Shrink Fit Holders |
| H100A-SF6-160MT | HSK100A Shrink Fit Holder 6mm Mold Type ChipHole 25K | 701.0 | 10.0 | 5.65 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H10ARAM-ER25-225ST-80FP | HSK100A AngleHead ER25 Slim 80mm Pitch FlatPIN | 13690.0 | 2.0 | 27.50 | 23.00 | 17.00 | 10.25 | Angle Heads |
| H125A-0375A-6.00 | HSK125A Aerospace End Mill Holder 3/8" | 0.0 | 1.0 | 11.00 | 0.00 | 0.00 | 0.00 | End Mill Holders Aer |
| H125A-0500A-6.00 | HSK125A Aerospace End Mill Holder 1/2" | 0.0 | 1.0 | 12.00 | 0.00 | 0.00 | 0.00 | End Mill Holders Aer |
| H125A-0625-9.14 | HSK125A Aerospace End Mill Holder 5/8" | 3556.0 | 1.0 | 12.75 | 18.00 | 6.31 | 6.50 | End Mill Holders Aer |
| H125A-0750A-5.75-ID | HSK125A Aerospace End Mill Holder 3/4" ChipHole GKN Unv468 | 1112.0 | 1.0 | 13.00 | 0.00 | 0.00 | 0.00 | End Mill Holders Aer |
| H125A-1250A-6.00 | HSK125A Aerospace End Mill Holder 1.1/4" | 0.0 | 1.0 | 23.00 | 0.00 | 0.00 | 0.00 | End Mill Holders Aer |
| H125A-SF0750-4.00CP | HSK125A Shrink Fit Holder 3/4" CoolantPorts | 0.0 | 1.0 | 9.10 | 5.50 | 6.00 | 9.50 | Shrink Fit Holders |
| H125A-SF1000-5.00CP | HSK125A Shrink Fit Holder 1" CoolantPorts | 0.0 | 1.0 | 10.75 | 5.50 | 6.00 | 9.50 | Shrink Fit Holders |
| H40E-SF0375-2.50B | HSK40E Shrink Fit Holder 3/8" Balanceable 25K | 369.0 | 1.0 | 0.85 | 3.75 | 2.00 | 2.00 | Shrink Fit Holders |
| H50E-SF0375-3.15B | HSK50E Shrink Fit Holder 3/8" Balanceable 25K | 297.0 | 3.0 | 1.50 | 5.25 | 2.50 | 2.50 | Shrink Fit Holders |
| H50E-SF0375-3.35 | HSK50E Shrink Fit Holder 3/8" 25K | 257.0 | 5.0 | 1.60 | 5.25 | 2.50 | 2.50 | Shrink Fit Holders |
| H50E-SF0500-3.15B | HSK50E Shrink Fit Holder 1/2" Balanceable 25K | 297.0 | 3.0 | 1.50 | 5.50 | 2.50 | 2.50 | Shrink Fit Holders |
| H50E-SF0500-3.54 | HSK50E Shrink Fit Holder 1/2" 25K | 257.0 | 1.0 | 1.50 | 5.50 | 2.50 | 2.50 | Shrink Fit Holders |
| H50E-SF0625-3.54 | HSK50E Shrink Fit Holder 5/8" 25K | 270.0 | 4.0 | 1.50 | 5.25 | 2.50 | 2.50 | Shrink Fit Holders |
| H50E-SF10-85 | HSK50E Shrink Fit Holder 10mm 25K | 270.0 | 2.0 | 1.40 | 4.50 | 2.50 | 2.50 | Shrink Fit Holders |
| H63A(80)-SF0375-3.375-ID | HSK63A 80mmFLG Shrink Fit Holder 3/8" ChipHole GKN Unv5204 30K | 527.0 | 1.0 | 2.95 | 6.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H63A(80)-SF0625-3.375-ID | HSK63A 80mmFLG Shrink Fit Holder 5/8" ChipHole GKN Unv201 30K | 431.0 | 1.0 | 3.00 | 6.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H63A(80)-SM1500-2.25-ID | HSK63A 80mmFLG Shell Mill Holder 1.1/2" ChipHole GKN Unv5278 | 508.0 | 2.0 | 6.00 | 6.50 | 3.86 | 3.86 | Shell Mill Holders |
| H63A-SF0375-3.00 | HSK63A Shrink Fit Holder 3/8" 25K | 591.0 | 1.0 | 2.30 | 5.00 | 2.75 | 2.75 | Shrink Fit Holders |
| H63A-SF0500-5.12 | HSK63A Shrink Fit Holder 1/2" ChipHole 25K | 347.0 | 16.0 | 2.70 | 6.50 | 2.75 | 2.75 | Shrink Fit Holders |
| H63A-SF0625-3.74MT | HSK63A Shrink Fit Holder 5/8" Mold Type ChipHole 25K | 546.0 | 2.0 | 2.20 | 5.00 | 2.75 | 2.75 | Shrink Fit Holders |
| H63A-SF0625-6.30 | HSK63A Shrink Fit Holder 5/8" ChipHole 25K | 393.0 | 2.0 | 3.35 | 8.50 | 2.75 | 2.75 | Shrink Fit Holders |
| H63A-SF10-120-ID | HSK63A Shrink Fit Holder 10mm ChipHole 25K | 0.0 | 1.0 | 2.60 | 2.75 | 2.75 | 2.75 | Shrink Fit Holders |
| H63E-SF0250-3.15B | HSK63E Shrink Fit Holder 1/4" Balanceable 25K | 648.0 | 12.0 | 2.00 | 5.00 | 2.75 | 2.75 | Shrink Fit Holders |
| H63E-SF0250-3.65B | HSK63E Shrink Fit Holder 1/4" Balanceable 25K | 532.0 | 13.0 | 2.15 | 5.00 | 2.75 | 2.75 | Shrink Fit Holders |
| H63E-SF0375-3.15B | HSK63E Shrink Fit Holder 3/8" Balanceable 25K | 513.0 | 3.0 | 2.10 | 5.00 | 2.75 | 2.75 | Shrink Fit Holders |
| H63E-SF0500-2.95B | HSK63E Shrink Fit Holder 1/2" Balanceable 25K | 513.0 | 12.0 | 2.00 | 4.00 | 2.75 | 2.75 | Shrink Fit Holders |
| H63E-SF0500-3.15B | HSK63E Shrink Fit Holder 1/2" Balanceable 25K | 513.0 | 34.0 | 2.05 | 5.00 | 2.75 | 2.75 | Shrink Fit Holders |
| H63E-SF0500-3.65B | HSK63E Shrink Fit Holder 1/2" Balanceable 25K | 513.0 | 1.0 | 2.25 | 5.00 | 2.75 | 2.75 | Shrink Fit Holders |
| H63F-SF0250-3.25 | HSK63F Shrink Fit Holder 1/4" 25K | 403.0 | 1.0 | 1.95 | 5.00 | 2.75 | 2.75 | Shrink Fit Holders |
| H63F-SF0750-10.00CP | HSK63F Shrink Fit Holder 3/4" CoolantPorts ChipHole 25K | 0.0 | 1.0 | 6.40 | 11.25 | 2.75 | 2.75 | Shrink Fit Holders |
| H63F-SF10-85 | HSK63F Shrink Fit Holder 10mm 20K | 372.0 | 1.0 | 2.10 | 5.00 | 2.75 | 2.75 | Shrink Fit Holders |
| H63F-SF16-95 | HSK63F Shrink Fit Holder 16mm 20K | 372.0 | 1.0 | 2.20 | 5.00 | 2.75 | 2.75 | Shrink Fit Holders |
| H63F-SF20-100 | HSK63F Shrink Fit Holder 20mm 20K | 372.0 | 4.0 | 2.60 | 5.00 | 2.75 | 2.75 | Shrink Fit Holders |
| H80F-SF0125-3.00B | HSK80F Shrink Fit Holder 1/8" DrivePins Balanceable 20K | 674.0 | 3.0 | 2.60 | 6.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H80F-SF0250-6.00B-BD36 | HSK80F Shrink Fit Holder 1/4" DrivePins Balanceable 20K | 616.0 | 1.0 | 3.80 | 8.50 | 4.00 | 4.00 | Shrink Fit Holders |
| H80F-SF0625-6.00B | HSK80F Shrink Fit Holder 5/8" DrivePins Balanceable 20K | 876.0 | 9.0 | 4.00 | 8.50 | 4.00 | 4.00 | Shrink Fit Holders |
| H80F-SF0750-3.00B | HSK80F Shrink Fit Holder 3/4" DrivePins Balanceable 20K | 482.0 | 1.0 | 2.90 | 6.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H80F-SF0750-3.15B | HSK80F Shrink Fit Holder 3/4" DrivePins Balanceable 20K | 484.0 | 6.0 | 3.20 | 6.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H80F-SF0750-3.50B | HSK80F Shrink Fit Holder 3/4" DrivePins Balanceable 20K | 632.0 | 27.0 | 3.55 | 6.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H80F-SF0750-3.50B-BD52 | HSK80F Shrink Fit Holder 3/4" DrivePins Balanceable 20K | 0.0 | 1.0 | 3.55 | 6.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H80F-SF1000-2.75B-SP | HSK80F Shrink Fit Holder 1" DrivePins Balanceable 20K | 554.0 | 10.0 | 2.90 | 6.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H80F-SF1000-3.00B | HSK80F Shrink Fit Holder 1" DrivePins Balanceable 20K | 550.0 | 2.0 | 3.65 | 6.00 | 4.00 | 4.00 | Shrink Fit Holders |
| H80F-SF1000-6.00B-BD58 | HSK80F Shrink Fit Holder 1" DrivePins Balanceable 20K | 0.0 | 1.0 | 6.60 | 8.50 | 4.00 | 4.00 | Shrink Fit Holders |
| HC20-9/16 | Straight Collet/Sleeve Hydraulic Chuck OD 20mm ID 9/16" | 402.0 | 1.0 | 0.25 | 2.75 | 1.25 | 1.25 | KM Collets |
| HMS-4.0-120L | Carbide Mill Reamer ST Shank 4.0mm OAL120mm | 595.0 | 4.0 | 1.00 | 0.00 | 0.00 | 0.00 | Reamers |
| HMS-5.0-150L | Carbide Mill Reamer ST Shank 5.0mm OAL150mm | 526.0 | 4.0 | 0.10 | 7.50 | 0.00 | 0.50 | Reamers |
| HSK100A-0250-90 | HSK100A End Mill Holder 1/4" ChipHole 25K | 608.0 | 2.0 | 5.64 | 11.75 | 4.75 | 5.43 | End Mill Holders |
| HSK100A-0437-6.00 | HSK100A End Mill Holder 7/16" ChipHole 25K | 592.0 | 10.0 | 6.60 | 10.00 | 5.00 | 5.00 | End Mill Holders |
| HSK100A-0625-165 | HSK100A End Mill Holder 5/8" ChipHole | 644.0 | 1.0 | 8.85 | 12.25 | 5.12 | 5.37 | End Mill Holders |
| HSK100A-0750-165 | HSK100A End Mill Holder 3/4" ChipHole 25K | 608.0 | 1.0 | 9.40 | 12.25 | 5.12 | 5.43 | End Mill Holders |
| HSK100A-1250-120 | HSK100A End Mill Holder 1.1/4" ChipHole 25K | 577.0 | 1.0 | 10.84 | 13.00 | 5.56 | 5.50 | End Mill Holders |
| HSK100A-C1.1/4EX-121 | HSK100A Milling Chuck X-Treme 1.1/4" 15K | 3092.0 | 5.0 | 9.80 | 12.00 | 6.50 | 6.50 | Milling Chucks |
| HSK100A-C1EX-116 | HSK100A Milling Chuck X-Treme 1" 15K | 2925.0 | 5.0 | 8.75 | 12.00 | 6.50 | 6.50 | Milling Chucks |
| HSK100A-C20EX-116 | HSK100A Milling Chuck X-Treme 20mm 20K | 2749.0 | 1.0 | 8.45 | 12.00 | 6.50 | 6.50 | Milling Chucks |
| HSK100A-C20EX-116-J | HSK100A Milling Chuck X-Treme 20mm 20K | 2749.0 | 1.0 | 8.45 | 12.00 | 6.50 | 6.50 | Milling Chucks |
| HSK100A-C3/4EX-116 | HSK100A Milling Chuck X-Treme 3/4" 20K | 2757.0 | 5.0 | 8.80 | 12.00 | 6.50 | 6.50 | Milling Chucks |
| HSK100A-C32EX-166-J | HSK100A Milling Chuck X-Treme 32mm 15K | 2857.0 | 1.0 | 12.60 | 12.00 | 6.50 | 6.50 | Milling Chucks |
| HSK100A-ER16-4.00B | HSK100A ER16 Collet Chuck HiTorque BearingNut Balanceable 18K | 419.0 | 5.0 | 6.35 | 9.75 | 4.86 | 4.75 | ER Collet Chucks |
| HSK100A-ER16-6.00B | HSK100A ER16 Collet Chuck HiTorque BearingNut Balanceable 25K | 467.0 | 1.0 | 6.45 | 9.75 | 4.75 | 4.75 | ER Collet Chucks |
| HSK100A-ER20-9.00 | HSK100A ER20 Collet Chuck HiTorque BearingNut ChipHole 25K | 0.0 | 1.0 | 7.70 | 3.85 | 3.85 | 12.00 | ER Collet Chucks |
| HSK100A-ER40S-120 | HSK100A ER40 Collet Chuck SolidNut ChipHole 25K | 596.0 | 42.0 | 7.90 | 13.58 | 4.92 | 4.92 | ER Collet Chucks |
| HSK100A-MMC12-190 | HSK100A MMC Mini Chuck 12mm BevelGear 20K | 1242.0 | 1.0 | 9.85 | 13.25 | 5.00 | 5.00 | MMC Collet Chucks |
| HSK100A-MT001 | HSK100A Morse Taper MT1 Adapter | 544.0 | 1.0 | 5.15 | 9.75 | 4.75 | 4.75 | Morse Taper Adapters |
| HSK100A-MT002 | HSK100A Morse Taper MT2 Adapter | 551.0 | 1.0 | 5.55 | 10.00 | 4.75 | 4.75 | Morse Taper Adapters |
| HSK100A-MT005 | HSK100A Morse Taper MT5 Adapter | 787.0 | 3.0 | 12.60 | 13.12 | 5.62 | 5.62 | Morse Taper Adapters |
| HSK100A-R0562-3.09(C) | HSK100A Rigid Tap Holder #1 Coolant | 1058.0 | 12.0 | 5.20 | 10.00 | 5.00 | 5.00 | Tap Holders |
| HSK100A-R0875-3.94(C) | HSK100A Rigid Tap Holder #2 Coolant | 1214.0 | 13.0 | 5.20 | 10.00 | 5.00 | 5.00 | Tap Holders |
| HSK100A-SF0625-6.30B | HSK100A Shrink Fit Holder 5/8" Balanceable 18K | 737.0 | 4.0 | 6.10 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| HSK100A-SF1000-6.30B | HSK100A Shrink Fit Holder 1" Balanceable 18K | 737.0 | 11.0 | 8.50 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| HSK100A-SF1250-4.72B | HSK100A Shrink Fit Holder 1.1/4" Balanceable 18K | 607.0 | 14.0 | 6.80 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| HSK100A-SF1250-6.30B | HSK100A Shrink Fit Holder 1.1/4" Balanceable 18K | 737.0 | 21.0 | 8.25 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| HSK100A-SF12-95 | HSK100A Shrink Fit Holder 12mm 18K | 590.0 | 1.0 | 5.20 | 8.50 | 4.00 | 4.00 | Shrink Fit Holders |
| HSK100A-SF32-160B | HSK100A Shrink Fit Holder 32mm Balanceable 18K | 748.0 | 3.0 | 8.15 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| HSK100A-SK10C-105 | HSK100A Slim Chuck SK10 Coolant 15K | 0.0 | 2.0 | 5.08 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| HSK100A-SK16C-200 | HSK100A Slim Chuck SK16 Coolant 2.4K | 0.0 | 12.0 | 9.24 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| HSK100A-SK25C-145 | HSK100A Slim Chuck SK25 Coolant 15K | 0.0 | 3.0 | 8.91 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| HSK100A-SM1250-2.50 | HSK100A Shell Mill Holder 1.1/4" | 923.0 | 1.0 | 7.10 | 13.00 | 5.62 | 5.50 | Shell Mill Holders |
| HSK100A-SM1250-4.00B | HSK100A Shell Mill Holder 1.1/4" Balanceable 15K | 959.0 | 1.0 | 10.35 | 13.00 | 5.75 | 5.50 | Shell Mill Holders |
| HSK100A-SM1500-4.00B | HSK100A Shell Mill Holder 1.1/2" Balanceable 15K | 996.0 | 5.0 | 13.00 | 13.00 | 5.50 | 5.50 | Shell Mill Holders |
| HSK100A-SM2000-4.00 | HSK100A Shell Mill Holder 2" | 737.0 | 14.0 | 27.40 | 16.00 | 6.00 | 5.00 | Shell Mill Holders |
| HSK100A-TC1375-7.95 | HSK100A Tension/Compression Tap Holder #3 | 0.0 | 3.0 | 15.00 | 13.00 | 5.50 | 5.50 | Tap Holders |
| HSK100A-TD-1-MASTER | HSK100A Tool Setter TD-1 Master Gauge | 1494.0 | 11.0 | 10.20 | 13.00 | 5.62 | 5.50 | Probes |
| HSK125A-0500A-6.60 | HSK125A Aerospace End Mill Holder 1/2" | 2201.0 | 3.0 | 11.30 | 11.25 | 7.12 | 6.75 | End Mill Holders Aer |
| HSK125A-0625A-3.188-ID | HSK125A Aerospace End Mill Holder 5/8" ChipHole GKN Unv676 | 0.0 | 1.0 | 9.25 | 0.00 | 0.00 | 0.00 | End Mill Holders Aer |
| HSK125A-0750A-4.50 | HSK125A Aerospace End Mill Holder 3/4" | 2201.0 | 5.0 | 10.95 | 11.25 | 7.12 | 6.50 | End Mill Holders Aer |
| HSK125A-1250A-5.00CP | HSK125A Aerospace End Mill Holder 1.1/4" CoolantPorts | 2201.0 | 1.0 | 19.55 | 11.25 | 7.00 | 6.50 | End Mill Holders Aer |
| HSK125A-1500A-5.625-ID | HSK125A Aerospace End Mill Holder 1.1/2" ChipHole GKN Unv274 | 0.0 | 2.0 | 15.45 | 0.00 | 0.00 | 0.00 | End Mill Holders Aer |
| HSK125A-2000A-5.50-ID | HSK125A Aerospace End Mill Holder 2" ChipHole GKN Unv278 | 0.0 | 2.0 | 18.35 | 0.00 | 0.00 | 0.00 | End Mill Holders Aer |
| HSK125A-C1.1/4EX-136S | HSK125A Milling Chuck X-Treme 1.1/4" 15K | 3110.0 | 4.0 | 14.60 | 12.00 | 9.75 | 8.50 | Milling Chucks |
| HSK125A-C1EX-121S | HSK125A Milling Chuck X-Treme 1" 15K | 2967.0 | 5.0 | 12.40 | 12.00 | 9.75 | 8.50 | Milling Chucks |
| HSK125A-C25EX-120S | HSK125A Milling Chuck X-Treme 25mm 15K | 3956.0 | 1.0 | 12.54 | 12.00 | 9.75 | 8.50 | Milling Chucks |
| HSK125A-C3/4EX-121S | HSK125A Milling Chuck X-Treme 3/4" 20K | 3740.0 | 4.0 | 12.80 | 12.00 | 9.75 | 8.50 | Milling Chucks |
| HSK125A-ER40-5.00-ID | HSK125A ER40 Collet Chuck HiTorque BearingNut GKN Unv504 | 0.0 | 1.0 | 11.85 | 0.00 | 0.00 | 0.00 | ER Collet Chucks |
| HSK125A-SF0500-5.00-ID | HSK125A Shrink Fit Holder 1/2" ChipHole GKN Unv902 | 0.0 | 2.0 | 9.50 | 0.00 | 0.00 | 0.00 | Shrink Fit Holders |
| HSK125A-SM1250-5.50CP | HSK125A Shell Mill Holder 1.1/4" CoolantPorts | 1305.0 | 1.0 | 15.50 | 5.50 | 5.50 | 10.25 | Shell Mill Holders |
| HSK125A-SM1500-3.50CP | HSK125A Shell Mill Holder 1.1/2" CoolantPorts | 0.0 | 1.0 | 15.10 | 7.62 | 11.62 | 6.25 | Shell Mill Holders |
| HSK32E-SF10-80B | HSK32E Shrink Fit Holder 10mm Balanceable 20K | 390.0 | 8.0 | 0.80 | 6.75 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK32E-SF3-60B | HSK32E Shrink Fit Holder 3mm Balanceable 20K | 567.0 | 14.0 | 0.45 | 6.75 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK32E-SF6-100B | HSK32E Shrink Fit Holder 6mm Balanceable 20K | 443.0 | 9.0 | 0.90 | 6.75 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK32E-SF8-100B | HSK32E Shrink Fit Holder 8mm Balanceable 20K | 443.0 | 10.0 | 0.95 | 6.75 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK40A-0437-75 | HSK40A End Mill Holder 7/16" | 334.0 | 1.0 | 1.25 | 7.50 | 3.00 | 3.00 | End Mill Holders |
| HSK40A-R0562-2.97(C) | HSK40A Rigid Tap Holder #1 Coolant | 786.0 | 17.0 | 1.00 | 7.00 | 3.00 | 3.00 | Tap Holders |
| HSK40A-R0562-3.15 | HSK40A Rigid Tap Holder #1 | 1041.0 | 11.0 | 1.00 | 7.00 | 3.00 | 3.00 | Tap Holders |
| HSK40E-SF0250-5.12B | HSK40E Shrink Fit Holder 1/4" Balanceable 20K | 428.0 | 11.0 | 1.70 | 7.50 | 3.00 | 2.75 | Shrink Fit Holders |
| HSK40E-SF0312-3.15B | HSK40E Shrink Fit Holder 5/16" Balanceable 20K | 359.0 | 16.0 | 0.95 | 6.75 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK40E-SF0312-5.12B | HSK40E Shrink Fit Holder 5/16" Balanceable 20K | 428.0 | 20.0 | 1.70 | 7.50 | 3.00 | 2.75 | Shrink Fit Holders |
| HSK40E-SF0375-3.15B | HSK40E Shrink Fit Holder 3/8" Balanceable 20K | 354.0 | 5.0 | 1.10 | 6.75 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK40E-SF0375-3.15BH | HSK40E Shrink Fit Holder 3/8" 20K | 563.0 | 1.0 | 1.10 | 4.50 | 2.00 | 2.00 | Shrink Fit Holders |
| HSK40E-SF0375-5.12B | HSK40E Shrink Fit Holder 3/8" Balanceable 20K | 428.0 | 7.0 | 1.90 | 7.50 | 3.00 | 2.75 | Shrink Fit Holders |
| HSK40E-SF0500-5.12B | HSK40E Shrink Fit Holder 1/2" Balanceable 20K | 428.0 | 2.0 | 1.80 | 7.50 | 3.00 | 2.75 | Shrink Fit Holders |
| HSK40E-SF0625-5.12B | HSK40E Shrink Fit Holder 5/8" Balanceable 20K | 428.0 | 5.0 | 1.95 | 7.50 | 3.00 | 2.75 | Shrink Fit Holders |
| HSK40E-SF10-130B | HSK40E Shrink Fit Holder 10mm Balanceable 20K | 428.0 | 15.0 | 1.85 | 7.50 | 3.00 | 2.75 | Shrink Fit Holders |
| HSK40E-SF10-80B | HSK40E Shrink Fit Holder 10mm Balanceable 20K | 359.0 | 8.0 | 1.10 | 6.75 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK40E-SF16-130B | HSK40E Shrink Fit Holder 16mm Balanceable 20K | 543.0 | 1.0 | 1.95 | 7.50 | 3.00 | 2.75 | Shrink Fit Holders |
| HSK40E-SF6-130B | HSK40E Shrink Fit Holder 6mm Balanceable 20K | 428.0 | 7.0 | 1.70 | 7.50 | 3.00 | 2.75 | Shrink Fit Holders |
| HSK40E-SF8-130B | HSK40E Shrink Fit Holder 8mm Balanceable 20K | 428.0 | 13.0 | 1.70 | 7.50 | 3.00 | 2.75 | Shrink Fit Holders |
| HSK40E-SF8-80B | HSK40E Shrink Fit Holder 8mm Balanceable 20K | 359.0 | 7.0 | 0.95 | 6.75 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK50A-ER32-70 | HSK50A ER32 Collet Chuck HiTorque BearingNut ChipHole 25K | 0.0 | 1.0 | 2.00 | 5.00 | 2.00 | 2.50 | ER Collet Chucks |
| HSK50E-ER8-110 | HSK50E ER8 Collet Chuck Mini Nut | 701.0 | 1.0 | 1.10 | 6.75 | 3.00 | 3.00 | ER Collet Chucks |
| HSK50E-SF0250-3.15B | HSK50E Shrink Fit Holder 1/4" Balanceable 20K | 562.0 | 1.0 | 1.40 | 6.75 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK50E-SF0250-3.65B | HSK50E Shrink Fit Holder 1/4" Balanceable 20K | 612.0 | 2.0 | 1.50 | 6.37 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK50E-SF0375-3.15B | HSK50E Shrink Fit Holder 3/8" Balanceable 20K | 512.0 | 2.0 | 1.50 | 6.75 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK50E-SF0375-3.65B | HSK50E Shrink Fit Holder 3/8" Balanceable 20K | 612.0 | 2.0 | 1.65 | 6.75 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK50E-SF0500-3.15B | HSK50E Shrink Fit Holder 1/2" Balanceable 20K | 512.0 | 1.0 | 1.45 | 6.75 | 3.00 | 3.00 | Shrink Fit Holders |
| HSK63A-0250-80 | HSK63A End Mill Holder 1/4" | 725.0 | 4.0 | 2.02 | 8.25 | 3.50 | 3.75 | End Mill Holders |
| HSK63A-0375-150 | HSK63A End Mill Holder 3/8" | 485.0 | 1.0 | 3.05 | 9.12 | 4.06 | 4.06 | End Mill Holders |
| HSK63A-0437-5.00B | HSK63A End Mill Holder 7/16" Balanceable 15K | 661.0 | 3.0 | 3.40 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| HSK63A-0500-150 | HSK63A End Mill Holder 1/2" | 485.0 | 2.0 | 4.35 | 9.12 | 4.00 | 4.25 | End Mill Holders |
| HSK63A-0500-5.00B | HSK63A End Mill Holder 1/2" Balanceable 15K | 593.0 | 3.0 | 3.35 | 8.25 | 3.62 | 3.75 | End Mill Holders |
| HSK63A-1000-4.50B | HSK63A End Mill Holder 1" Balanceable 15K | 586.0 | 1.0 | 5.00 | 11.18 | 4.12 | 4.00 | End Mill Holders |
| HSK63A-1250-6.00B | HSK63A End Mill Holder 1.1/4" Balanceable 15K | 646.0 | 1.0 | 7.00 | 11.25 | 4.25 | 4.00 | End Mill Holders |
| HSK63A-C1.1/4-110G | HSK63A Milling Chuck 1.1/4" HiSpeed 15K | 0.0 | 1.0 | 5.39 | 10.50 | 5.00 | 3.50 | Milling Chucks |
| HSK63A-C3/4-110 | HSK63A Milling Chuck 3/4" 8K | 0.0 | 7.0 | 4.62 | 10.50 | 5.00 | 3.50 | Milling Chucks |
| HSK63A-ER25-57 | HSK63A ER25 Collet Chuck HiTorque BearingNut ChipHole 25K | 0.0 | 1.0 | 1.90 | 2.75 | 3.00 | 3.75 | ER Collet Chucks |
| HSK63A-PBH11-50 | HSK63A Metrol Probe Base Holder w/IdChipHole | 132.0 | 21.0 | 1.85 | 0.00 | 0.00 | 0.00 | Probes |
| HSK63A-SF0375-2.56BC | Use H63A-SF0375 3/8" | 10.0 | 1.0 | 1.25 | 8.25 | 3.75 | 3.56 | Shrink Fit Holders |
| HSK63A-SF0375-3.35B | HSK63A Shrink Fit Holder 3/8" Balanceable 20K | 443.0 | 1.0 | 2.05 | 8.25 | 3.75 | 3.75 | Shrink Fit Holders |
| HSK63A-SF0375-6.30BH | HSK63A Shrink Fit Holder 3/8" 20K | 512.0 | 1.0 | 3.25 | 8.50 | 2.75 | 2.75 | Shrink Fit Holders |
| HSK63A-SF0625-3.74B | HSK63A Shrink Fit Holder 5/8" Balanceable 20K | 422.0 | 1.0 | 2.25 | 8.25 | 3.75 | 3.75 | Shrink Fit Holders |
| HSK63A-SF0625-3.74B1 | HSK63A Shrink Fit Holder 5/8" 20K | 443.0 | 1.0 | 2.25 | 8.25 | 3.75 | 3.75 | Shrink Fit Holders |
| HSK63A-SF0625-6.30B | HSK63A Shrink Fit Holder 5/8" Balanceable 20K | 541.0 | 18.0 | 3.30 | 11.18 | 4.18 | 4.00 | Shrink Fit Holders |
| HSK63A-SF0625-6.30BH | HSK63A Shrink Fit Holder 5/8" 20K | 512.0 | 1.0 | 3.40 | 8.50 | 2.75 | 2.75 | Shrink Fit Holders |
| HSK63A-SF0750-6.30B | HSK63A Shrink Fit Holder 3/4" Balanceable 20K | 549.0 | 16.0 | 4.15 | 11.25 | 4.50 | 4.00 | Shrink Fit Holders |
| HSK63A-SF0750-6.30BH | HSK63A Shrink Fit Holder 3/4" 20K | 512.0 | 6.0 | 4.10 | 8.50 | 2.75 | 2.75 | Shrink Fit Holders |
| HSK63A-SF1000-6.30B | HSK63A Shrink Fit Holder 1" Balanceable 20K | 541.0 | 8.0 | 4.40 | 11.25 | 4.00 | 4.00 | Shrink Fit Holders |
| HSK63A-SF1000-6.30BH | HSK63A Shrink Fit Holder 1" Haimer 20K | 512.0 | 7.0 | 5.50 | 8.50 | 2.75 | 2.75 | Shrink Fit Holders |
| HSK63A-SF16-160B | HSK63A Shrink Fit Holder 16mm Balanceable 20K | 550.0 | 10.0 | 3.35 | 11.18 | 4.25 | 4.00 | Shrink Fit Holders |
| HSK63A-SF16-95B | HSK63A Shrink Fit Holder 16mm Balanceable 20K | 453.0 | 27.0 | 2.30 | 8.25 | 3.68 | 3.68 | Shrink Fit Holders |
| HSK63A-SF20-100B | HSK63A Shrink Fit Holder 20mm Balanceable 20K | 478.0 | 1.0 | 2.60 | 8.25 | 3.75 | 3.75 | Shrink Fit Holders |
| HSK63A-SF20-160B | HSK63A Shrink Fit Holder 20mm Balanceable 20K | 550.0 | 1.0 | 4.10 | 11.25 | 4.18 | 4.18 | Shrink Fit Holders |
| HSK63A-SF25-115B | HSK63A Shrink Fit Holder 25mm Balanceable 20K | 453.0 | 3.0 | 3.20 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| HSK63A-SF25-160B | HSK63A Shrink Fit Holder 25mm Balanceable 20K | 550.0 | 7.0 | 5.55 | 11.18 | 4.12 | 4.12 | Shrink Fit Holders |
| HSK63A-SF32-120B | HSK63A Shrink Fit Holder 32mm Balanceable 20K | 453.0 | 8.0 | 3.85 | 11.25 | 4.25 | 4.25 | Shrink Fit Holders |
| HSK63A-SM1250-5.00 | HSK63A Shell Mill Holder 1.1/4" | 451.0 | 6.0 | 8.50 | 11.50 | 4.25 | 4.00 | Shell Mill Holders |
| HSK63A-TC1375-7.72 | HSK63A Tension/Compression Tap Holder #3 | 981.0 | 22.0 | 10.80 | 11.00 | 4.00 | 4.00 | Tap Holders |
| HSK63A-TC1375-9.41C | HSK63A Tension/Compression Tap Holder #3 Coolant | 1150.0 | 20.0 | 11.02 | 11.00 | 4.00 | 4.00 | Tap Holders |
| HSK63A-TD-1-MASTER | HSK63A Tool Setter TD-1 Master Gauge | 998.0 | 8.0 | 3.40 | 8.25 | 3.56 | 3.56 | Probes |
| HSK63C-SM1500-1.575 | HSK63A Shell Mill Holder 1.1/2" | 247.0 | 1.0 | 4.85 | 9.75 | 4.86 | 4.75 | Shell Mill Holders |
| HSK63E-ER20-75 | HSK63E ER20 Collet Chuck HiTorque BearingNut ChipHole | 541.0 | 1.0 | 2.15 | 8.31 | 3.62 | 3.75 | ER Collet Chucks |
| HSK63E-SM1000-60B | HSK63E Shell Mill Holder 1" Balanceable 15K | 329.0 | 2.0 | 3.20 | 8.25 | 3.75 | 3.68 | Shell Mill Holders |
| HSK63F-0750-5.50 | HSK63F End Mill Holder 3/4" DrivePins | 807.0 | 1.0 | 5.25 | 11.12 | 4.12 | 4.12 | End Mill Holders |
| HSK63F-10-2.88 | HSK63F End Mill Holder 10mm DrivePins | 807.0 | 1.0 | 2.25 | 8.31 | 3.75 | 3.61 | End Mill Holders |
| HSK63F-MMC8C-127 | HSK63F MMC Mini Chuck 10mm BevelGear Coolant 30K | 660.0 | 2.0 | 3.78 | 9.50 | 4.50 | 4.00 | MMC Collet Chucks |
| HSK63F-SF0250-3.15BH | Use NEW Part Number: H63F-SF0250 | 0.0 | 1.0 | 1.85 | 5.00 | 2.75 | 2.75 | Shrink Fit Holders |
| HSK63F-SF0375-2.56BC | HSK63F Shrink Fit Holder 3/8" DrivePins Balanceable 20K | 444.0 | 4.0 | 1.85 | 8.25 | 3.75 | 3.62 | Shrink Fit Holders |
| HSK63F-SF0500-2.95B | HSK63F Shrink Fit Holder 1/2" DrivePins Balanceable 20K | 589.0 | 1.0 | 1.85 | 8.25 | 3.75 | 3.68 | Shrink Fit Holders |
| HSK63F-SF0625-3.15BC | HSK63F Shrink Fit Holder 5/8" DrivePins Balanceable 20K | 444.0 | 2.0 | 1.95 | 8.25 | 3.62 | 3.62 | Shrink Fit Holders |
| HSK63F-SF0625-3.94BC | HSK63F Shrink Fit Holder 5/8" DrivePins Balanceable 20K | 464.0 | 4.0 | 2.25 | 8.25 | 3.75 | 3.75 | Shrink Fit Holders |
| HSK63F-SF0750-3.15BC | HSK63F Shrink Fit Holder 3/4" DrivePins Balanceable 20K | 444.0 | 2.0 | 2.25 | 8.25 | 3.75 | 3.75 | Shrink Fit Holders |
| HSK63F-SF0750-3.94BC | HSK63F Shrink Fit Holder 3/4" DrivePins Balanceable 20K | 464.0 | 1.0 | 2.65 | 8.25 | 3.68 | 3.75 | Shrink Fit Holders |
| HSK63F-SF1000-4.33BC | HSK63F Shrink Fit Holder 1" DrivePins 20K | 464.0 | 2.0 | 3.60 | 8.25 | 3.75 | 3.75 | Shrink Fit Holders |
| HSK63-MASTER | Presetter Master Gauge HSK63 w/o Flange | 756.0 | 1.0 | 2.95 | 8.25 | 3.75 | 3.75 | Test Bars |
| HSK80F/LPM-MMC12C-117 | HSK80F MMC Mini Chuck 12mm BevelGear DrivePins Coolant 30K | 1570.0 | 1.0 | 5.40 | 11.75 | 5.00 | 4.75 | MMC Collet Chucks |
| HSK80F/LPM-MMC8C-107-A | HSK80F MMC Mini Chuck 10mm DrawBar Coolant 30K DrivePins | 1305.0 | 1.0 | 4.00 | 11.81 | 5.00 | 4.75 | MMC Collet Chucks |
| HSK80F-SF0250-2.36BC | HSK80F Shrink Fit Holder 1/4" Balanceable Centra 20K | 618.0 | 3.0 | 2.70 | 6.00 | 4.75 | 4.75 | Shrink Fit Holders |
| HSK80F-SF0375-2.56BC | HSK80F Shrink Fit Holder 3/8" Balanceable Centra 20K | 618.0 | 1.0 | 2.80 | 6.00 | 4.75 | 4.75 | Shrink Fit Holders |
| HSK80F-SF0625-3.15BC | HSK80F Shrink Fit Holder 5/8" Balanceable Centra 20K | 618.0 | 14.0 | 3.00 | 6.00 | 4.75 | 4.75 | Shrink Fit Holders |
| HSK80F-SM0750-2.375 | HSK80F Shell Mill Holder 3/4" | 1508.0 | 8.0 | 3.50 | 9.75 | 4.75 | 4.75 | Shell Mill Holders |
| HSK80F-SM0750-2.375B | HSK80F Shell Mill Holder 3/4" Balanceable 15K | 503.0 | 9.0 | 3.45 | 9.75 | 4.75 | 4.75 | Shell Mill Holders |
| HSK80F-SM0750-3.00B | HSK80F Shell Mill Holder 3/4" Balanceable 15K | 0.0 | 4.0 | 3.85 | 9.75 | 4.75 | 4.75 | Shell Mill Holders |
| HSK80F-SM1000-2.375 | HSK80F Shell Mill Holder 1" | 474.0 | 5.0 | 4.20 | 9.75 | 4.75 | 4.75 | Shell Mill Holders |
| HSK80F-SM1000-2.375B | HSK80F Shell Mill Holder 1" Balanceable 15K | 577.0 | 5.0 | 4.20 | 9.81 | 4.75 | 4.75 | Shell Mill Holders |
| HW-CHK-ADPT-R1772/3-A211 | Adapter Plate for HW-15C-OS-R1772/HW-18C-OS-R1773 A2-11 | 2258.0 | 1.0 | 39.65 | 16.50 | 16.50 | 6.00 | Accessories |
| IT40-WE5/8-65 | SK40 End Mill Holder 5/8" 15K | 145.0 | 3.0 | 3.00 | 6.25 | 4.00 | 2.75 | End Mill Holders |
| IT50-WE1-105 | SK50 End Mill Holder 1" 10K | 145.0 | 8.0 | 9.80 | 10.75 | 5.00 | 4.75 | End Mill Holders |
| IT50-WE3/4-75 | SK50 End Mill Holder 3/4" 10K | 145.0 | 1.0 | 9.05 | 8.87 | 5.00 | 5.00 | End Mill Holders |
| IT50-WE5/8-75 | SK50 End Mill Holder 5/8" 10K | 145.0 | 6.0 | 7.95 | 8.81 | 5.00 | 4.75 | End Mill Holders |
| KM1.5/8-3/4 | Straight Collet/Sleeve OD 1.5/8" ID 3/4" | 0.0 | 3.0 | 1.25 | 2.25 | 2.37 | 3.50 | KM Collets |
| KM1.5/8-5/8 | Straight Collet/Sleeve OD 1.5/8" ID 5/8" | 0.0 | 3.0 | 1.20 | 2.25 | 2.25 | 3.50 | KM Collets |
| KM20-1/8 | Straight Collet/Sleeve OD 20mm ID 1/8" Large Chamfered Edge | 106.0 | 49.0 | 0.22 | 2.75 | 1.25 | 1.25 | KM Collets |
| KM32-5/8Q | Straight Collet/Sleeve OD 32mm ID 5/8" Large Chamfered Edge | 219.0 | 61.0 | 0.65 | 3.75 | 1.75 | 1.75 | KM Collets |
| LEA3/4S-5/8C | Lathe Reducing Sleeve/Bushing 3/4"->5/8" | 460.0 | 2.0 | 0.62 | 6.25 | 3.50 | 2.75 | Sleeves |
| M0206-0125-1.50 | Morse Taper MT2 End Mill Holder 1/8" | 158.0 | 15.0 | 0.40 | 6.50 | 2.00 | 2.00 | End Mill Holders |
| M0206-0250-1.50 | Morse Taper MT2 End Mill Holder 1/4" | 158.0 | 6.0 | 0.45 | 6.50 | 2.00 | 2.00 | End Mill Holders |
| M0206-0312-1.50 | Morse Taper MT2 End Mill Holder 5/16" | 158.0 | 28.0 | 0.50 | 6.50 | 2.00 | 2.00 | End Mill Holders |
| M0206-0500-1.81 | Morse Taper MT2 End Mill Holder 1/2" | 158.0 | 4.0 | 1.10 | 6.50 | 2.00 | 2.00 | End Mill Holders |
| M0306-0250-1.50 | Morse Taper MT3 End Mill Holder 1/4" | 171.0 | 13.0 | 0.70 | 6.50 | 2.00 | 2.00 | End Mill Holders |
| M0306-0312-1.50 | Morse Taper MT3 End Mill Holder 5/16" | 171.0 | 10.0 | 0.75 | 6.50 | 2.00 | 2.00 | End Mill Holders |
| M0306-0375-1.88 | Morse Taper MT3 End Mill Holder 3/8" | 173.0 | 4.0 | 0.85 | 6.50 | 2.00 | 2.00 | End Mill Holders |
| M0306-0437-1.94 | Morse Taper MT3 End Mill Holder 7/16" | 561.0 | 1.0 | 1.30 | 6.43 | 2.00 | 2.00 | End Mill Holders |
| M0306-0500-1.94 | Morse Taper MT3 End Mill Holder 1/2" | 300.0 | 2.0 | 1.15 | 6.50 | 2.00 | 2.00 | End Mill Holders |
| MB-B | Magnetic Base (Premium) | 107.0 | 33.0 | 3.25 | 8.50 | 4.50 | 3.25 | Accessories |
| MBT40-C1.1/4-120 | MBT40 DualContact Milling Chuck 1.1/4" Nose=69 8K | 594.0 | 3.0 | 6.49 | 10.00 | 5.00 | 3.50 | Milling Chucks |
| MBT40-C1.1/4-120G | MBT40 DualContact Milling Chuck 1.1/4" Nose=69 HiSpeed 20K | 275.0 | 1.0 | 6.49 | 10.00 | 5.00 | 3.50 | Milling Chucks |
| MBT40-C1.1/4-85G | MBT40 DualContact Milling Chuck 1.1/4" Nose=69 HiSpeed 20K | 995.0 | 2.0 | 4.95 | 10.00 | 5.00 | 3.50 | Milling Chucks |
| MBT50-FMA31.75-105 | MBT50 DualContact Shell Mill Holder 1.1/4" | 959.0 | 1.0 | 13.86 | 11.75 | 5.00 | 4.68 | Shell Mill Holders |
| MCAT40-C1.1/4SL120UG | MCAT40 DualContact Milling Chuck 1.1/4" Nose=69 HiSpeed 20K | 741.0 | 9.0 | 6.40 | 10.00 | 5.00 | 3.50 | Milling Chucks |
| MCAT40-C1.1/4SLF120G | MCAT40 DualContact Milling Chuck 1.1/4" Nose=69 HiSpeed DIN 20K | 838.0 | 2.0 | 6.40 | 10.00 | 5.00 | 3.50 | Milling Chucks |
| MCAT40-C1F-120U | MCAT40 DualContact Milling Chuck 1" DIN 8K | 757.0 | 10.0 | 6.05 | 10.00 | 5.00 | 3.50 | Milling Chucks |
| MCAT40-C3/4F-120U | MCAT40 DualContact Milling Chuck 3/4" DIN 8K | 732.0 | 16.0 | 5.28 | 10.00 | 4.50 | 4.50 | Milling Chucks |
| MCAT40-FMD12.7-45U | MCAT40 DualContact Shell Mill Holder 1/2" | 674.0 | 5.0 | 2.90 | 8.50 | 4.50 | 3.75 | Shell Mill Holders |
| MCAT40-FMD12.7-90U | MCAT40 DualContact Shell Mill Holder 1/2" | 714.0 | 6.0 | 3.85 | 8.31 | 4.43 | 3.75 | Shell Mill Holders |
| MCAT40-FMD38.1-45U | MCAT40 DualContact Shell Mill Holder 1.1/2" | 666.0 | 4.0 | 4.95 | 8.50 | 4.50 | 3.75 | Shell Mill Holders |
| MCAT40-MMC12-120U | MCAT40 DualContact MMC Mini Chuck 12mm BevelGear 30K | 825.0 | 1.0 | 4.00 | 8.50 | 4.50 | 3.75 | MMC Collet Chucks |
| MCAT40-MMC12F-120U | MCAT40 DualContact MMC Mini Chuck 12mm BevelGear DIN 30K | 1032.0 | 23.0 | 4.00 | 8.50 | 4.50 | 3.75 | MMC Collet Chucks |
| MCAT40-MMC12F-90U | MCAT40 DualContact MMC Mini Chuck 12mm BevelGear DIN 30K | 888.0 | 2.0 | 3.74 | 9.00 | 4.25 | 4.25 | MMC Collet Chucks |
| MCAT40-MMC8F-90U | MCAT40 DualContact MMC Mini Chuck 10mm BevelGear DIN 30K | 863.0 | 22.0 | 3.41 | 9.25 | 4.25 | 4.00 | MMC Collet Chucks |
| MCAT40-SK16C-180U | MCAT40 DualContact Slim Chuck SK16 Coolant 15K | 705.0 | 1.0 | 5.65 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT40-SK25C-90UP | MCAT40 DualContact Slim Chuck SK25 Coolant HiSpeed 20K | 781.0 | 9.0 | 4.18 | 8.50 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT40-SKT10F-90UP | MCAT40 DualContact Slim Chuck SK10 HiSpeed DIN 20K | 667.0 | 5.0 | 3.28 | 8.50 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT40-SKT6F-120UP | MCAT40 DualContact Slim Chuck SK6 HiSpeed DIN 20K | 573.0 | 1.0 | 3.35 | 8.50 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT40-SKT6F-90UP | MCAT40 DualContact Slim Chuck SK6 HiSpeed DIN 20K | 524.0 | 1.0 | 3.08 | 8.50 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT40-VC6F-120U | MCAT40 DualContact VC6 Collet Chuck DIN 30K | 741.0 | 19.0 | 3.70 | 8.32 | 4.32 | 3.75 | VC Collet Chucks |
| MCAT40-VC6F-60U | MCAT40 DualContact VC6 Collet Chuck DIN 30K | 762.0 | 12.0 | 3.00 | 9.31 | 4.25 | 3.75 | VC Collet Chucks |
| MCAT50-C1.1/4-90UG | MCAT50 DualContact Milling Chuck 1.1/4" HiSpeed 15K | 970.0 | 21.0 | 10.56 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| MCAT50-C1.1/4FD-90UG | MCAT50 DualContact Milling Chuck 1.1/4" HiSpeed DIN 15K | 982.0 | 20.0 | 10.56 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| MCAT50-C1-135U | MCAT50 DualContact Milling Chuck 1" 8K | 989.0 | 10.0 | 11.35 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| MCAT50-C1-165U | MCAT50 DualContact Milling Chuck 1" 8K | 1124.0 | 2.0 | 12.10 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| MCAT50-C1F-135UG | MCAT50 DualContact Milling Chuck 1" HiSpeed DIN 15K | 926.0 | 8.0 | 11.35 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| MCAT50-C3/4-135UG | MCAT50 DualContact Milling Chuck 3/4" HiSpeed 20K | 943.0 | 1.0 | 11.66 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| MCAT50-C3/4-165UG | MCAT50 DualContact Milling Chuck 3/4" HiSpeed 20K | 1115.0 | 3.0 | 11.65 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| MCAT50-FMD19.05-250U | MCAT50 DualContact Shell Mill Holder 3/4" | 1177.0 | 2.0 | 14.00 | 17.75 | 6.00 | 6.00 | Shell Mill Holders |
| MCAT50-FMD19.05-45U | MCAT50 DualContact Shell Mill Holder 3/4" | 652.0 | 7.0 | 7.05 | 10.31 | 4.00 | 4.68 | Shell Mill Holders |
| MCAT50-FMD25.4-45U | MCAT50 DualContact Shell Mill Holder 1" | 728.0 | 1.0 | 7.85 | 10.25 | 5.00 | 3.75 | Shell Mill Holders |
| MCAT50-FMD31.75-105U | MCAT50 DualContact Shell Mill Holder 1.1/4" | 769.0 | 9.0 | 13.86 | 11.81 | 5.00 | 4.75 | Shell Mill Holders |
| MCAT50-FMD31.75-45U | MCAT50 DualContact Shell Mill Holder 1.1/4" | 674.0 | 3.0 | 10.23 | 10.75 | 5.25 | 4.75 | Shell Mill Holders |
| MCAT50-FMD50.8-75U | MCAT50 DualContact Shell Mill Holder 2" | 652.0 | 15.0 | 16.39 | 10.32 | 5.00 | 4.75 | Shell Mill Holders |
| MCAT50-GSK10C-105UP | MCAT50 DualContact Slim Chuck SK10 Coolant HiSpeed 20K | 717.0 | 3.0 | 9.26 | 10.75 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-GSK10C-165UP | MCAT50 DualContact Slim Chuck SK10 Coolant HiSpeed 20K | 761.0 | 10.0 | 10.12 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-GSK10C-195UP | MCAT50 DualContact Slim Chuck SK10 Coolant HiSpeed 20K | 905.0 | 10.0 | 13.45 | 13.25 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-GSK16C-105UP | MCAT50 DualContact Slim Chuck SK16 Coolant HiSpeed 20K | 806.0 | 35.0 | 9.68 | 10.75 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-GSK16C-165UP | MCAT50 DualContact Slim Chuck SK16 Coolant HiSpeed 20K | 748.0 | 2.0 | 10.05 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-GSK25C-105UP | MCAT50 DualContact Slim Chuck SK25 Coolant HiSpeed 15K | 855.0 | 30.0 | 9.13 | 10.75 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-GSK6C-105UP | MCAT50 DualContact Slim Chuck SK6 Coolant HiSpeed 20K | 731.0 | 9.0 | 9.22 | 10.75 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-GSK6C-195UP | MCAT50 DualContact Slim Chuck SK6 Coolant HiSpeed 20K | 761.0 | 10.0 | 13.45 | 13.25 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-MMC12-105U | MCAT50 DualContact MMC Mini Chuck 12mm BevelGear 20K | 888.0 | 12.0 | 9.85 | 11.00 | 5.00 | 4.50 | MMC Collet Chucks |
| MCAT50-MMC12-165U | MCAT50 DualContact MMC Mini Chuck 12mm BevelGear 20K | 962.0 | 4.0 | 9.60 | 12.00 | 5.00 | 5.00 | MMC Collet Chucks |
| MCAT50-MMC12C-135U | MCAT50 DualContact MMC Mini Chuck 12mm BevelGear Coolant 20K | 1134.0 | 4.0 | 9.90 | 12.00 | 5.00 | 5.00 | MMC Collet Chucks |
| MCAT50-MMC12C-165U | MCAT50 DualContact MMC Mini Chuck 12mm BevelGear Coolant 20K | 1373.0 | 5.0 | 9.60 | 12.00 | 5.00 | 5.00 | MMC Collet Chucks |
| MCAT50-MMC8-135U | MCAT50 DualContact MMC Mini Chuck 10mm BevelGear 20K | 1010.0 | 3.0 | 9.35 | 12.00 | 5.00 | 5.00 | MMC Collet Chucks |
| MCAT50-MMC8-165U | MCAT50 DualContact MMC Mini Chuck 10mm BevelGear 20K | 973.0 | 4.0 | 8.80 | 12.00 | 5.00 | 5.00 | MMC Collet Chucks |
| MCAT50-MMC8C-135U | MCAT50 DualContact MMC Mini Chuck 10mm BevelGear Coolant 20K | 1257.0 | 2.0 | 9.35 | 12.00 | 5.00 | 5.00 | MMC Collet Chucks |
| MCAT50-MMC8C-165U | MCAT50 DualContact MMC Mini Chuck 10mm BevelGear Coolant 20K | 1207.0 | 3.0 | 8.80 | 12.00 | 5.00 | 5.00 | MMC Collet Chucks |
| MCAT50-SK10C-165U | MCAT50 DualContact Slim Chuck SK10 Coolant 20K | 842.0 | 4.0 | 10.12 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SK16C-105U | MCAT50 DualContact Slim Chuck SK16 Coolant 20K | 851.0 | 2.0 | 9.68 | 10.75 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SK16C-195U | MCAT50 DualContact Slim Chuck SK16 Coolant 20K | 867.0 | 3.0 | 13.45 | 13.25 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SK16F-195U-M | MCAT50 DualContact Slim Chuck SK16 DIN_Mod 20K | 0.0 | 1.0 | 13.45 | 13.25 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SK25C-105U | MCAT50 DualContact Slim Chuck SK25 Coolant 15K | 909.0 | 10.0 | 9.13 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SK25C-165U | MCAT50 DualContact Slim Chuck SK25 Coolant 15K | 963.0 | 1.0 | 12.35 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SK25C-165UP | MCAT50 DualContact Slim Chuck SK25 Coolant HiSpeed 15K | 1037.0 | 5.0 | 12.35 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SK25C-195U | MCAT50 DualContact Slim Chuck SK25 Coolant 15K | 936.0 | 21.0 | 13.45 | 13.25 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SK6C-105U | MCAT50 DualContact Slim Chuck SK6 Coolant 20K | 684.0 | 17.0 | 9.22 | 10.75 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SK6C-165U | MCAT50 DualContact Slim Chuck SK6 Coolant 20K | 765.0 | 5.0 | 8.88 | 13.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SK6C-195U | MCAT50 DualContact Slim Chuck SK6 Coolant 20K | 806.0 | 30.0 | 13.45 | 13.25 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SKT16F-105U | MCAT50 DualContact Slim Chuck SK16 DIN 20K | 859.0 | 19.0 | 9.68 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SKT16F-165U | MCAT50 DualContact Slim Chuck SK16 DIN 20K | 893.0 | 20.0 | 10.05 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| MCAT50-SZF25C-195U | MCAT50 DualContact BullsEye ZeroFit Slim Chuck SK25 Coolant 10K | 1406.0 | 2.0 | 10.75 | 13.25 | 5.00 | 4.75 | Bulls Eye |
| MCAT50-VC13F-135U | MCAT50 DualContact VC13 Collet Chuck DIN 20K | 889.0 | 21.0 | 9.75 | 11.81 | 5.00 | 4.75 | VC Collet Chucks |
| MCAT50-VC6-105U | MCAT50 DualContact VC6 Collet Chuck 20K | 807.0 | 5.0 | 7.85 | 10.75 | 5.00 | 4.75 | VC Collet Chucks |
| MET-S-PROBE-BT30-A01S | BT30 Metrol Probe Kit Set | 6245.0 | 1.0 | 0.10 | 0.00 | 0.00 | 0.00 | Probes |
| MET-S-PROBE-BT40-A01S | BT40 Metrol Probe Kit Set | 6245.0 | 1.0 | 0.10 | 0.00 | 0.00 | 0.00 | Probes |
| MET-S-PROBE-CAT40-A01S | CAT40 Metrol Probe Kit Set | 6245.0 | 1.0 | 0.10 | 0.00 | 0.00 | 0.00 | Probes |
| MET-S-PROBE-CAT50S-A01S | CAT50 Metrol Probe Kit STD Length Set | 6336.0 | 1.0 | 0.10 | 0.00 | 0.00 | 0.00 | Probes |
| MET-S-PROBE-HSK100AL-A01S | HSK100A Metrol Probe Kit Long Length Set | 6394.0 | 1.0 | 0.10 | 0.00 | 0.00 | 0.00 | Probes |
| MNL12-BG50Z | Mori BMT60 Static BG50mm Z<Axial>90D mm ExtCool | 827.0 | 1.0 | 16.90 | 7.00 | 4.50 | 6.25 | Mori Static Tools |
| MNL12-BGS15Z | Mori BMT60 Static BG1.1/2" Z<Axial>90D ExtCool Sub T10143 | 1706.0 | 1.0 | 27.30 | 7.00 | 6.00 | 4.50 | Mori Static Tools |
| MNL12-CAPTO4X-10K | Mori BMT60 Live PSC C4 X<Radial>STRT ExtCool HiSpeed 10K CH67 | 12730.0 | 2.0 | 15.00 | 10.00 | 8.00 | 5.00 | Mori Live Tools |
| MNL12-CAPTO4Z-10K | Mori BMT60 Live PSC C4 Z<Axial>90D ExtCool HiSpeed 10K CH90 | 15204.0 | 3.0 | 22.90 | 10.00 | 7.75 | 5.00 | Mori Live Tools |
| MNL12-CAPTO4Z-C-2MP | Mori BMT60 Live PSC C4 Z<Axial>90D IntCoolant 1.5MP 3K CH90 | 15544.0 | 2.0 | 27.75 | 11.50 | 5.50 | 10.50 | Mori Live Tools |
| MNL12-ER40X-C-7MP | Mori BMT60 Live ER40 X<Radial>STRT IntExtCoolant7MP 6K | 3742.0 | 8.0 | 17.85 | 9.50 | 6.25 | 5.25 | Mori Live Tools |
| MNL12-ER40Z-STATIC | Mori BMT60 Static ER40 Z<Axial>90D IntCoolant CH90 | 2080.0 | 3.0 | 19.50 | 9.50 | 6.75 | 5.00 | Mori Static Tools |
| MNL12-SM22MMZ | Mori BMT60 Live ShellMill 22mm Z<Axial>90D ExtCool | 8071.0 | 1.0 | 24.10 | 10.25 | 11.00 | 5.67 | Mori Live Tools |
| MNZ20-BG75Z-MSD | Mori BMT40 Static BG3/4" Z<Axial>90D MainSubDual 2+2 ExtCool | 842.0 | 14.0 | 17.70 | 9.86 | 7.50 | 6.12 | Mori Static Tools |
| MNZ20-ER16-AD | Mori BMT40 Live ER16 STRT Adjustable 0~90D | 16469.0 | 1.0 | 14.35 | 0.00 | 0.00 | 0.00 | Mori Live Tools |
| MNZ20-ER25Z-ICE | Mori BMT40 Live ER25 Z<Axial>90D IntExtCoolant7MP 6.5K | 6254.0 | 1.0 | 13.90 | 10.25 | 8.25 | 8.50 | Mori Live Tools |
| MNZ20-OD75X-MS | Mori BMT40 Static OD3/4" SQ X<Radial>STRT MainSub1+1 ExtCool | 820.0 | 20.0 | 11.15 | 7.00 | 5.50 | 4.50 | Mori Static Tools |
| MSL12-ID12Z-S | Mori BMT Static ID1.1/4" Z<Axial>90D MainSub Short ExtCool | 892.0 | 1.0 | 14.60 | 7.75 | 6.87 | 3.75 | Mori Static Tools |
| MU55-SK16Z-125-ICE | Murata BMT55 Live SK16 90D<Axial>IntExtCoolant7MP 6.5K CH125 | 0.0 | 3.0 | 24.10 | 0.00 | 0.00 | 0.00 | Murata Live Tools |
| MZMP46-BG32MZ-C | Mazak VDI40 Static BG32mm Z<Axial>90D IntExtCool CH130 | 881.0 | 23.0 | 15.20 | 10.00 | 7.50 | 6.25 | Mazak Static Tools |
| MZMP46-ER25X-OFF-HSC | Mazak VDI40 Live ER25 X<Radial>STRT Offset HiSpeed IntExtCool7MP | 5863.0 | 1.0 | 12.80 | 9.75 | 7.50 | 5.00 | Mazak Live Tools |
| MZMP46-ER25X-OFF-ICE | Mazak VDI40 Live ER25 X<Radial>STRT Offset IntExtCoolant7MP 6.5K | 5882.0 | 2.0 | 12.70 | 9.75 | 7.50 | 5.00 | Mazak Live Tools |
| MZMP46-ID10Z | Mazak VDI40 Static ID1" SQ Z<Axial>90D ExtCool | 969.0 | 29.0 | 14.95 | 10.00 | 7.50 | 6.25 | Mazak Static Tools |
| MZMP46-MI50X-OFF-C | Mazak VDI40 Live MI50 X<Radial>STRT Offset IntExtCoolant7MP | 0.0 | 3.0 | 12.55 | 9.75 | 7.75 | 5.00 | Mazak Live Tools |
| MZMP46-MI50Z-ICE | Mazak VDI40 Live MI50 Z<Axial>90D IntExtCoolant7MP 8.5K | 0.0 | 2.0 | 21.55 | 10.00 | 7.50 | 6.25 | Mazak Live Tools |
| MZMP46-OD20MX | Mazak VDI40 Static OD20mm SQ X<Radial>STRT ExtCool | 909.0 | 15.0 | 11.75 | 10.00 | 7.50 | 6.25 | Mazak Static Tools |
| MZMP47-ER25X-OFF-HSC | Mazak VDI40 Live ER25 X<Radial>STRT Offset HiSpeed 12K IntExtC7MP | 5693.0 | 1.0 | 13.10 | 9.75 | 7.75 | 6.00 | Mazak Live Tools |
| MZMP47-ER32Z-SUB | Mazak VDI40 Live ER32 Z<Axial>90D Sub Spindle ExtCool 6.5K | 4511.0 | 1.0 | 23.00 | 11.00 | 7.50 | 10.50 | Mazak Live Tools |
| MZMP47-MI50Z-ICE | Mazak VDI40 Live MI50 Z<Axial>90D IntExtCoolant7MP 6.5K | 0.0 | 1.0 | 24.75 | 10.00 | 7.75 | 5.00 | Mazak Live Tools |
| MZMP5-CO32MX | Mazak VDI50 Static CutOff 32mm X<Radial>STRT ExtCool | 1442.0 | 11.0 | 18.25 | 12.75 | 7.50 | 6.75 | Mazak Static Tools |
| MZQT46-BG10Z-C | Mazak VDI40 Static BG1" Z<Axial>90D IntExtCool CH110 | 906.0 | 21.0 | 14.15 | 10.00 | 7.50 | 6.25 | Mazak Static Tools |
| MZQT46-ER16-AD-HS | Mazak VDI40 Live ER16 X<Radial>STRT Adjustable 0~110D HiSpeed | 9785.0 | 1.0 | 11.15 | 9.62 | 7.75 | 4.75 | Mazak Live Tools |
| MZQT46-ER25X-AD-HS2-ICE | Mazak VDI40 Live ER25 X-Rad STRT Adjust+-107D HiSpd IntExtCool7MP | 0.0 | 1.0 | 12.69 | 0.00 | 0.00 | 0.00 | Mazak Live Tools |
| MZQT46-ER25X-OFF-HS | Mazak VDI40 Live ER25 X<Radial>STRT Offset HiSpeed ExtCool | 6661.0 | 1.0 | 8.95 | 9.00 | 12.00 | 5.50 | Mazak Live Tools |
| MZQT46-ER25Y-AD | Mazak VDI40 Live ER25 <Y-Ax>STRT Adjustable +-90D | 9853.0 | 1.0 | 12.05 | 9.86 | 7.50 | 5.00 | Mazak Live Tools |
| MZQT46-ER25Z-ICE | Mazak VDI40 Live ER25 Z<Axial>90D IntExtCoolant7MP 8.5K CH95.25 | 5441.0 | 2.0 | 18.50 | 9.84 | 7.48 | 4.72 | Mazak Live Tools |
| MZQT47-CO32MMX | Mazak VDI40 Static CutOff 32mm X<Radial>STRT ST ExtCool | 1186.0 | 23.0 | 10.75 | 10.00 | 6.25 | 6.50 | Mazak Static Tools |
| MZQT47-ER16-AD-SUB | Mazak VDI40 Live ER16 X<Radial>STRT Adjustable 0~100D Sub Spindle | 10633.0 | 1.0 | 10.90 | 9.45 | 7.48 | 4.92 | Mazak Live Tools |
| MZQT47-ER32X | Mazak VDI40 Live ER32 X<Radial>STRT ExtCool | 3232.0 | 4.0 | 8.10 | 9.75 | 7.68 | 4.75 | Mazak Live Tools |
| MZQT47-ID10Z-RH | Mazak VDI40 Static ID1" SQ Z<Axial>90D ExtCool Right Hand Only | 1115.0 | 11.0 | 17.90 | 10.00 | 7.50 | 6.25 | Mazak Static Tools |
| MZQT47-MI40Y-MD-ICE | Mazak VDI40 Live MI40 <Y-Ax>STRT MainDual IntExtCoolant7MP 6.5K | 12642.0 | 1.0 | 11.90 | 11.00 | 7.00 | 10.00 | Mazak Live Tools |
| MZQT47-MI50X-OFF | Mazak VDI40 Live MI50 X<Radial>STRT Offset ExtCool 8.5K | 5709.0 | 1.0 | 13.95 | 9.50 | 7.75 | 4.50 | Mazak Live Tools |
| MZQT47-OD25MX | Mazak VDI40 Static OD25mm X<Radial>STRT | 0.0 | 1.0 | 16.85 | 10.00 | 6.50 | 4.50 | Mazak Static Tools |
| MZQT5-CO32MMX | Mazak VDI50 Static CutOff 32mm X<Radial>STRT ExtCool | 1310.0 | 28.0 | 20.40 | 10.00 | 7.50 | 6.25 | Mazak Static Tools |
| MZQT5-ID10Z | Mazak VDI50 Static ID1" SQ Z<Axial>90D ExtCool | 1186.0 | 23.0 | 31.10 | 12.75 | 7.50 | 6.75 | Mazak Static Tools |
| MZQT5-MI63Z-ICE | Mazak VDI50 Live MI63 Z<Axial>90D IntExtCoolant7MP 6.5K | 0.0 | 1.0 | 36.15 | 13.00 | 11.00 | 5.00 | Mazak Live Tools |
| N3004-0001-1.00 | NMTB30 Morse Taper MT1 Adapter | 185.0 | 17.0 | 0.80 | 7.00 | 3.00 | 3.00 | Morse Taper Adapters |
| N3006-0875-2.50 | NMTB30 End Mill Holder 7/8" | 323.0 | 2.0 | 1.95 | 7.00 | 3.00 | 3.00 | End Mill Holders |
| N3007-0100-2.75 | NMTB30 DA100 Collet Chuck 20K | 120.0 | 43.0 | 1.00 | 6.75 | 3.00 | 3.00 | DA Collet Chucks |
| N4002-1500-5.62 | NMTB40 Stub Mill Arbor 1.1/2" | 508.0 | 7.0 | 6.90 | 11.00 | 4.00 | 4.00 | Stub Mill Holders |
| N4003-0001-0.69 | NMTB40 JT1 Jacobs Drill Chuck Adapter | 222.0 | 10.0 | 1.90 | 8.25 | 3.62 | 3.62 | Jacobs Taper Adapter |
| N5001-1500-1.88 | NMTB50 Shell Mill Holder 1.1/2" | 0.0 | 1.0 | 9.00 | 10.00 | 5.00 | 5.00 | Shell Mill Holders |
| N5002-1500-6.60 | NMTB50 Stub Mill Arbor 1.1/2" | 840.0 | 1.0 | 12.55 | 13.00 | 5.50 | 5.50 | Stub Mill Holders |
| N5003-0002-1.34 | NMTB50 JT2 Jacobs Drill Chuck Adapter | 256.0 | 7.0 | 6.00 | 10.00 | 5.00 | 5.00 | Jacobs Taper Adapter |
| N5004-0002-1.88 | NMTB50 Morse Taper MT2 Adapter | 577.0 | 1.0 | 5.80 | 10.00 | 5.00 | 5.00 | Morse Taper Adapters |
| N5004-0004-3.25 | NMTB50 Morse Taper MT4 Adapter | 548.0 | 1.0 | 6.60 | 10.00 | 5.00 | 5.00 | Morse Taper Adapters |
| N5006-0250-2.75 | NMTB50 End Mill Holder 1/4" | 247.0 | 2.0 | 5.85 | 10.00 | 5.00 | 5.00 | End Mill Holders |
| N5006-0875-2.88 | NMTB50 End Mill Holder 7/8" | 558.0 | 3.0 | 6.90 | 9.81 | 5.00 | 4.75 | End Mill Holders |
| N5006-1000-3.50DE | NMTB50 End Mill Holder 1" Double Sided End Mill | 292.0 | 4.0 | 8.20 | 9.75 | 4.75 | 4.75 | End Mill Holders |
| N5006-1500A-3.625-ID-GKN | NMTB50 Aerospace End Mill Holder 1.1/2" ChipHole GKN Unv423 | 518.0 | 5.0 | 10.30 | 4.00 | 3.86 | 9.75 | End Mill Holders Aer |
| N5006-2000A-4.531-ID-GKN | NMTB50 Aerospace End Mill Holder 2" GKN Unv420 | 0.0 | 1.0 | 14.45 | 0.00 | 0.00 | 0.00 | End Mill Holders Aer |
| N5007-0016-2.00 | NMTB50 ER16 Collet Chuck HiTorque BearingNut | 440.0 | 11.0 | 5.95 | 10.00 | 5.00 | 5.00 | ER Collet Chucks |
| N5007-0025-2.00 | NMTB50 ER25 Collet Chuck HiTorque BearingNut | 423.0 | 1.0 | 6.00 | 9.75 | 4.75 | 4.75 | ER Collet Chucks |
| N5016-0875-4.50 | NMTB50 End Mill Holder 7/8" | 323.0 | 5.0 | 8.25 | 13.00 | 5.50 | 5.50 | End Mill Holders |
| N50BH-1500-1.75 | NMTB50 Threaded Boring Head Holder 1.1/2-18 | 420.0 | 6.0 | 8.25 | 9.81 | 4.81 | 4.75 | Male Threaded Boring |
| N50F1-2000-3.00 | NMTB50 Shell Mill Holder 2" | 941.0 | 1.0 | 19.05 | 11.00 | 7.00 | 6.00 | Shell Mill Holders |
| NB3017-0025-4.00 | NBT30 DualContact ER25 Collet Chuck HiTorque BearingNut 18K | 299.0 | 1.0 | 1.80 | 7.50 | 3.00 | 2.75 | ER Collet Chucks |
| NB4006-0625-2.50 | NBT40 DualContact End Mill Holder 5/8" 15K | 242.0 | 6.0 | 2.80 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| NB4006-0750-2.50 | NBT40 DualContact End Mill Holder 3/4" 15K | 247.0 | 16.0 | 3.00 | 5.50 | 2.75 | 2.75 | End Mill Holders |
| NB4007-0016-3.50 | NBT40 DualContact ER16 Collet Chuck HiTorque BearingNut | 0.0 | 5.0 | 4.00 | 0.00 | 0.00 | 0.00 | ER Collet Chucks |
| NB4007-0025-2.25 | NBT40 DualContact ER25 Collet Chuck HiTorque BearingNut 18K | 293.0 | 9.0 | 2.40 | 8.25 | 3.00 | 3.00 | ER Collet Chucks |
| NB4016-0625-4.00 | NBT40 DualContact End Mill Holder 5/8" 15K | 269.0 | 1.0 | 3.70 | 8.25 | 3.56 | 3.75 | End Mill Holders |
| NB4016-0750-4.00 | NBT40 DualContact End Mill Holder 3/4" 15K | 269.0 | 1.0 | 4.00 | 8.25 | 3.75 | 3.75 | End Mill Holders |
| NB4016-1000-6.00 | NBT40 DualContact End Mill Holder 1" 15K | 379.0 | 3.0 | 7.40 | 11.25 | 4.12 | 4.12 | End Mill Holders |
| NB4016-1250-6.00 | NBT40 DualContact End Mill Holder 1.1/4" 15K | 391.0 | 4.0 | 7.65 | 11.25 | 4.00 | 4.25 | End Mill Holders |
| NB5006-0750-3.00 | NBT50 DualContact End Mill Holder 3/4" | 416.0 | 10.0 | 8.80 | 0.00 | 0.00 | 0.00 | End Mill Holders |
| NBT30-MMC12-105 | NBT30 DualContact MMC Mini Chuck 10mm BevelGear 30K | 912.0 | 1.0 | 3.10 | 9.50 | 4.50 | 3.75 | MMC Collet Chucks |
| NBT40-SF0500-6.30 | NBT40 DualContact Shrink Fit Holder 1/2" 25K | 368.0 | 5.0 | 4.00 | 9.25 | 3.00 | 3.00 | Shrink Fit Holders |
| NBT40-SF0625-3.54 | NBT40 DualContact Shrink Fit Holder 5/8" 25K | 301.0 | 9.0 | 2.90 | 7.00 | 3.00 | 3.00 | Shrink Fit Holders |
| NBT40-SK10C-90-J | NBT40 DualContact Slim Chuck SK10 JetSlotNut 15K | 486.0 | 1.0 | 3.28 | 8.50 | 5.00 | 5.00 | SK Slim Chuck Holder |
| NBT50-C16-105G | NBT50 DualContact Milling Chuck 16mm HiSpeed 15K | 0.0 | 1.0 | 10.12 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| NBT50-C20-105G | NBT50 DualContact Milling Chuck 20mm HiSpeed 20K | 0.0 | 1.0 | 10.56 | 0.00 | 0.00 | 0.00 | Milling Chucks |
| NBT50-C3/4-105G | NBT50 DualContact Milling Chuck 3/4" HiSpeed 20K | 0.0 | 1.0 | 10.67 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| NBT50-MDSK25-105P | NBT50 DualContact Major Dream Slim Chuck SK25 15K | 0.0 | 1.0 | 10.91 | 0.00 | 0.00 | 0.00 | SK Slim Chuck Holder |
| NC4002-1000-6.17 | NCAT40 DualContact Stub Mill Arbor 1" ChipHole | 320.0 | 14.0 | 4.80 | 11.25 | 4.00 | 4.00 | Stub Mill Holders |
| NC4006-0500-2.50 | NCAT40 DualContact End Mill Holder 1/2" ChipHole 15K | 0.0 | 6.0 | 2.65 | 11.00 | 4.00 | 4.00 | End Mill Holders |
| NC4047-0016-9.00 | NCAT40 DualContact ER16 Collet Chuck BearingNut ChipHole 18K | 487.0 | 1.0 | 5.85 | 15.18 | 4.43 | 3.37 | ER Collet Chucks |
| NC4047-0020-9.00 | NCAT40 DualContact ER20 Collet Chuck BearingNut ChipHole 18K | 487.0 | 10.0 | 6.05 | 16.00 | 4.25 | 3.25 | ER Collet Chucks |
| NC40S6-0500-1.75 | NCAT40 DualContact End Mill Holder 1/2" Stub Lenth ChipHole 15K | 211.0 | 2.0 | 2.25 | 8.31 | 3.31 | 3.63 | End Mill Holders |
| NC5001-1000-150CP | NCAT50 DualContact Shell Mill Holder 1" CoolantPorts 20K | 581.0 | 4.0 | 13.00 | 0.00 | 0.00 | 0.00 | Shell Mill Holders |
| NC5006-0750-3.00-ID | NCAT50 DualContact End Mill Holder 3/4" ChipHole | 0.0 | 2.0 | 9.00 | 0.00 | 0.00 | 0.00 | End Mill Holders |
| NC5006-2500-6.00 | NCAT50 DualContact End Mill Holder 2.1/2" ChipHole 10K | 634.0 | 8.0 | 19.24 | 16.00 | 6.00 | 6.00 | End Mill Holders |
| NC5011-1000-4.00 | NCAT50 DualContact Shell Mill Holder 1" | 490.0 | 1.0 | 10.10 | 13.00 | 5.56 | 5.62 | Shell Mill Holders |
| NC5017-0020-4.00 | NCAT50 DualContact ER20 Collet Chuck BearingNut ChipHole 10K | 482.0 | 3.0 | 7.22 | 10.00 | 4.75 | 4.75 | ER Collet Chucks |
| NC5021-1000-6.00 | NCAT50 DualContact Shell Mill Holder 1" | 451.0 | 1.0 | 12.45 | 13.00 | 5.50 | 5.25 | Shell Mill Holders |
| NC5026-1000-8.00 | NCAT50 DualContact End Mill Holder 1" ChipHole 15K | 622.0 | 9.0 | 15.00 | 16.00 | 6.00 | 4.87 | End Mill Holders |
| NC5036-0750-8.00 | NCAT50 DualContact End Mill Holder 3/4" ChipHole 15K | 515.0 | 7.0 | 13.65 | 16.00 | 5.86 | 4.75 | End Mill Holders |
| NC5037-0020-8.00 | NCAT50 DualContact ER20 Collet Chuck BearingNut ChipHole 18K | 559.0 | 14.0 | 11.10 | 16.50 | 6.00 | 5.00 | ER Collet Chucks |
| NC5057-0040-12.00 | NCAT50 DualContact ER40 Collet Chuck BearingNut ChipHole 10K | 963.0 | 6.0 | 20.60 | 19.25 | 5.75 | 5.50 | ER Collet Chucks |
| NC5066-0375-15.00 | NCAT50 DualContact End Mill Holder 3/8" ChipHole 10K | 943.0 | 9.0 | 17.20 | 23.50 | 6.00 | 5.50 | End Mill Holders |
| NC5066-0500-15.00 | NCAT50 DualContact End Mill Holder 1/2" ChipHole 10K | 943.0 | 20.0 | 18.80 | 23.25 | 6.00 | 5.00 | End Mill Holders |
| NC5066-0625-15.00 | NCAT50 DualContact End Mill Holder 5/8" ChipHole 10K | 943.0 | 8.0 | 19.85 | 23.50 | 6.00 | 5.50 | End Mill Holders |
| NC5066-0750-15.00 | NCAT50 DualContact End Mill Holder 3/4" ChipHole 10K | 943.0 | 3.0 | 21.25 | 23.50 | 6.00 | 5.50 | End Mill Holders |
| NC5066-1000-15.00 | NCAT50 DualContact End Mill Holder 1" ChipHole 10K | 964.0 | 6.0 | 24.10 | 23.50 | 6.00 | 5.50 | End Mill Holders |
| NC5066-1250-15.00 | NCAT50 DualContact End Mill Holder 1.1/4" ChipHole 10K | 975.0 | 13.0 | 24.90 | 23.50 | 6.00 | 5.50 | End Mill Holders |
| NC50S6-2000-3.63 | NCAT50 DualContact End Mill Holder 2" Stub Lenth ChipHole 10K | 474.0 | 5.0 | 10.15 | 10.00 | 4.75 | 4.75 | End Mill Holders |
| NCAT40-C3/4-70U | NCAT40 DualContact Milling Chuck 3/4" NonANSI 8K | 593.0 | 1.0 | 3.81 | 10.00 | 5.00 | 3.50 | Milling Chucks |
| NCAT40-FMD31.75-45U | NCAT40 DualContact Shell Mill Holder 1.1/4" | 395.0 | 2.0 | 4.29 | 8.31 | 4.50 | 3.75 | Shell Mill Holders |
| NCAT40-Q26-95U | NCAT40 DualContact Boring Base/Master Holder | 455.0 | 4.0 | 4.29 | 9.25 | 4.21 | 3.74 | Modular Master Holde |
| NCAT40-SF0312-3.15CP-SP | NCAT40 DualContact Shrink Fit Holder 5/16" CoolantPorts 25K | 393.0 | 2.0 | 2.70 | 6.00 | 3.00 | 3.00 | Shrink Fit Holders |
| NCAT50-C1.1/4EX-116U | NCAT50 DualContact Milling Chuck X-Treme 1.1/4" 15K | 3092.0 | 5.0 | 11.30 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| NCAT50-C1EX-111U | NCAT50 DualContact Milling Chuck X-Treme 1" 15K | 2925.0 | 5.0 | 10.30 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| NCAT50-C20EX-106U | NCAT50 DualContact Milling Chuck X-Treme 20mm 20K | 2757.0 | 3.0 | 10.30 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| NCAT50-C3/4EX-106U | NCAT50 DualContact Milling Chuck X-Treme 3/4" 20K | 2757.0 | 3.0 | 10.50 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| NCAT50-C32EX-115U | NCAT50 DualContact Milling Chuck X-Treme 32mm 15K | 3092.0 | 1.0 | 11.33 | 12.50 | 6.50 | 4.50 | Milling Chucks |
| NCAT50-FMD31.75-90U | NCAT50 DualContact Shell Mill Holder 1.1/4" | 704.0 | 10.0 | 11.11 | 12.00 | 5.00 | 4.75 | Shell Mill Holders |
| NCAT50-FMD38.1-90U | NCAT50 DualContact Shell Mill Holder 1.1/2" | 676.0 | 1.0 | 13.20 | 11.75 | 5.00 | 4.68 | Shell Mill Holders |
| NCAT50-FMD50.8-50U | NCAT50 DualContact Shell Mill Holder 2" | 617.0 | 10.0 | 12.30 | 11.75 | 5.00 | 4.75 | Shell Mill Holders |
| NCAT50-SF0250-3.15 | NCAT50 DualContact Shrink Fit Holder 1/4" 25K | 388.0 | 4.0 | 6.50 | 9.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF0250-5.12 | NCAT50 DualContact Shrink Fit Holder 1/4" 25K | 958.0 | 1.0 | 7.85 | 13.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF0375-3.15 | NCAT50 DualContact Shrink Fit Holder 3/8" 25K | 402.0 | 3.0 | 6.45 | 9.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF0375-6.30 | NCAT50 DualContact Shrink Fit Holder 3/8" 25K | 526.0 | 12.0 | 7.85 | 12.00 | 3.93 | 11.37 | Shrink Fit Holders |
| NCAT50-SF0500-3.15 | NCAT50 DualContact Shrink Fit Holder 1/2" 25K | 402.0 | 3.0 | 6.45 | 9.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF0500-6.30 | NCAT50 DualContact Shrink Fit Holder 1/2" 25K | 526.0 | 7.0 | 7.90 | 12.00 | 3.75 | 11.37 | Shrink Fit Holders |
| NCAT50-SF0625-3.15 | NCAT50 DualContact Shrink Fit Holder 5/8" 25K | 410.0 | 7.0 | 6.75 | 9.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF0750-5.12 | NCAT50 DualContact Shrink Fit Holder 3/4" 25K | 461.0 | 1.0 | 8.10 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF0750-6.30 | NCAT50 DualContact Shrink Fit Holder 3/4" 25K | 526.0 | 9.0 | 8.95 | 12.00 | 4.00 | 11.50 | Shrink Fit Holders |
| NCAT50-SF1000-5.12 | NCAT50 DualContact Shrink Fit Holder 1" 25K | 461.0 | 2.0 | 9.00 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF1000-6.30 | NCAT50 DualContact Shrink Fit Holder 1" 25K | 785.0 | 4.0 | 10.70 | 12.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF10-130 | NCAT50 DualContact Shrink Fit Holder 10mm 25K | 688.0 | 1.0 | 7.45 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF10-160 | NCAT50 DualContact Shrink Fit Holder 10mm 25K | 785.0 | 3.0 | 7.95 | 12.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF10-80 | NCAT50 DualContact Shrink Fit Holder 10mm 25K | 591.0 | 2.0 | 6.65 | 9.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF12-130 | NCAT50 DualContact Shrink Fit Holder 12mm 25K | 688.0 | 1.0 | 7.40 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF12-160 | NCAT50 DualContact Shrink Fit Holder 12mm 25K | 785.0 | 3.0 | 7.90 | 12.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF1250-3.94CP | NCAT50 DualContact Shrink Fit Holder 1.1/4" CoolantPorts 25K | 600.0 | 19.0 | 7.95 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF14-130 | NCAT50 DualContact Shrink Fit Holder 14mm 25K | 688.0 | 1.0 | 7.65 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF14-160 | NCAT50 DualContact Shrink Fit Holder 14mm 25K | 785.0 | 1.0 | 8.20 | 12.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF14-80 | NCAT50 DualContact Shrink Fit Holder 14mm 25K | 591.0 | 1.0 | 6.75 | 9.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF16-130 | NCAT50 DualContact Shrink Fit Holder 16mm 25K | 688.0 | 1.0 | 7.55 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF16-160 | NCAT50 DualContact Shrink Fit Holder 16mm 25K | 785.0 | 3.0 | 8.15 | 12.00 | 4.00 | 11.75 | Shrink Fit Holders |
| NCAT50-SF20-160 | NCAT50 DualContact Shrink Fit Holder 20mm 25K | 785.0 | 3.0 | 8.95 | 12.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF25-100 | NCAT50 DualContact Shrink Fit Holder 25mm 25K | 639.0 | 1.0 | 8.25 | 10.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF25-160 | NCAT50 DualContact Shrink Fit Holder 25mm 25K | 785.0 | 2.0 | 10.75 | 12.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF32-130 | NCAT50 DualContact Shrink Fit Holder 32mm 25K | 824.0 | 3.0 | 9.05 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF32-160 | NCAT50 DualContact Shrink Fit Holder 32mm 25K | 941.0 | 3.0 | 10.40 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF6-130 | NCAT50 DualContact Shrink Fit Holder 6mm 25K | 688.0 | 1.0 | 7.15 | 11.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SF6-160 | NCAT50 DualContact Shrink Fit Holder 6mm 25K | 785.0 | 2.0 | 7.40 | 12.00 | 4.00 | 4.00 | Shrink Fit Holders |
| NCAT50-SK13C-165U | NCAT50 DualContact Slim Chuck SK13 Coolant 20K | 723.0 | 5.0 | 10.00 | 12.00 | 5.00 | 5.00 | SK Slim Chuck Holder |
| NCAT50-VC6-105U | NCAT50 DualContact VC6 Collet Chuck 20K | 771.0 | 1.0 | 8.36 | 12.00 | 5.00 | 4.75 | VC Collet Chucks |
| NCK1.1/4-1 | Straight Depth Adjustable Collet/Sleeve OD 1.1/4" ID 1" | 69.0 | 10.0 | 0.80 | 3.75 | 1.75 | 1.75 | KM Collets |
| NCK1.1/4-1/2 | Straight Depth Adjustable Collet/Sleeve OD 1.1/4" ID 1/2" | 69.0 | 2.0 | 0.80 | 3.75 | 1.75 | 1.75 | KM Collets |
| NCK1.1/4-1/4 | Straight Depth Adjustable Collet/Sleeve OD 1.1/4" ID 1/4" | 69.0 | 7.0 | 0.80 | 3.75 | 1.75 | 1.75 | KM Collets |
| NCK1.1/4-16 | Straight Depth Adjustable Collet/Sleeve OD 1.1/4" ID 16mm | 69.0 | 4.0 | 0.80 | 3.75 | 1.75 | 1.75 | KM Collets |
| NCK1.1/4-3/8 | Straight Depth Adjustable Collet/Sleeve OD 1.1/4" ID 3/8" Coolant | 133.0 | 8.0 | 0.80 | 3.75 | 1.75 | 1.75 | KM Collets |
| NK1.1/4-3/16 | Straight Depth Adjustable Collet/Sleeve OD 1.1/4" ID 3/16" | 100.0 | 20.0 | 0.81 | 3.75 | 1.75 | 1.75 | KM Collets |
| NK1.1/4-5/16 | Straight Depth Adjustable Collet/Sleeve OD 1.1/4" ID 5/16" | 100.0 | 16.0 | 0.84 | 3.75 | 1.75 | 1.75 | KM Collets |
| NK1.1/4-7/8 | Straight Depth Adjustable Collet/Sleeve OD 1.1/4" ID 7/8" | 100.0 | 11.0 | 0.62 | 3.75 | 1.75 | 1.75 | KM Collets |
| NK1-7/8 | Straight Depth Adjustable Collet/Sleeve OD 1" ID 7/8" | 97.0 | 13.0 | 0.22 | 2.75 | 1.25 | 1.25 | KM Collets |
| NK32-5/16 | Straight Depth Adjustable Collet/Sleeve OD 32mm ID 5/16" | 141.0 | 18.0 | 0.80 | 3.75 | 1.75 | 1.75 | KM Collets |
| NK32-7/16 | Straight Depth Adjustable Collet/Sleeve OD 32mm ID 7/16" | 141.0 | 11.0 | 0.80 | 3.75 | 1.75 | 1.75 | KM Collets |
| NK32-9/16 | Straight Depth Adjustable Collet/Sleeve OD 32mm ID 9/16" | 141.0 | 19.0 | 0.79 | 3.75 | 1.75 | 1.75 | KM Collets |
| NKA01-38000 | Nakamura Live WFB32-20QC X<Radial>STRT ExtCool 6K | 3931.0 | 1.0 | 3.35 | 4.00 | 6.32 | 4.12 | Nakamura |
| NKA01-41000 | Nakamura Live Thread whirler | 10895.0 | 1.0 | 7.05 | 9.75 | 7.75 | 4.75 | Nakamura |
| NKA01-49000 | Nakamura Live ER20 X<Radial>STRT IntExtCoolant7MP 6K CH57.50 | 9824.0 | 3.0 | 5.22 | 0.00 | 0.00 | 0.00 | Nakamura |
| NKTC-BT40 | Taper Cleaner BT40 | 4883.0 | 1.0 | 84.70 | 0.00 | 0.00 | 0.00 | Accessories |
| NKTC-BT50/CAT50-US | Taper Cleaner BT50/CAT50 US Spec 110-120V | 7821.0 | 1.0 | 100.00 | 0.00 | 0.00 | 0.00 | Accessories |
| NKTC-CLP-ICAT50 | Taper Cleaner CAT50 | 251.0 | 2.0 | 0.42 | 6.30 | 3.39 | 2.64 | Accessories |
| NT50SLB-1000A-3.125 | NMTB50 Aerospace End Mill Holder 1" V-Grooved | 953.0 | 19.0 | 8.55 | 9.81 | 4.86 | 4.75 | End Mill Holders Aer |
| NT50SLB-1250A-5.625 | NMTB50 Aerospace End Mill Holder 1.1/4" w/ V-Groove | 1092.0 | 25.0 | 13.10 | 13.00 | 5.56 | 5.56 | End Mill Holders Aer |
| NTPT05-024S | #1 PositiveDrive RigidTap Collet PIPE .700x.531 17.8x13.5 3/8P | 79.0 | 35.0 | 0.60 | 2.25 | 1.50 | 1.50 | Tap Collets |
| OKE4-CO32X | Okuma BMT60 Static CutOff 32mm X<Radial>STRT ExtCool | 1183.0 | 10.0 | 9.25 | 10.00 | 7.50 | 6.25 | Okuma Static Tools |
| OKE4-ER40Z-C | Okuma BMT60 Live ER40 Z<Axial>90D IntCooles | 9246.0 | 2.0 | 25.35 | 10.00 | 7.50 | 5.00 | Okuma Live Tools |
| OKEX-ER25X-HS2 | Okuma BMT60 Live ER25 X<Radial>STRT HiSpeed ExtCool | 11227.0 | 1.0 | 24.65 | 5.00 | 10.00 | 7.50 | Okuma Live Tools |
| OKEX-ER25Z-HS2 | Okuma BMT60 Live ER25 Z<Axial>90D HiSpeed ExtCool | 12350.0 | 2.0 | 23.95 | 10.00 | 7.75 | 5.00 | Okuma Live Tools |
| OKEX-ER25Z-MSD | Okuma BMT60 Live ER25 Z<Axial>90D MainSubDual 2+2 ExtCool 6.5K | 11682.0 | 13.0 | 19.05 | 11.02 | 7.28 | 10.43 | Okuma Live Tools |
| OKEX-ID20MZ | Okuma BMT60 Static ID20mm SQ Z<Axial>90D ExtCool | 624.0 | 2.0 | 11.20 | 10.00 | 7.50 | 6.25 | Okuma Static Tools |
| OKL3-ER32X-C-1.5MP | Okuma VDI40 Live ER32 X<Radial>90D IntCoolant 1.5MP | 4.0 | 1.0 | 18.05 | 10.00 | 7.75 | 5.25 | Okuma Live Tools |
| OKL3-ER32X-REV-MIM | Okuma VDI40 Live ER32 X<Radial>90D ExtCool 5.2K CCW | 8567.0 | 2.0 | 13.25 | 10.25 | 6.25 | 4.50 | Okuma Live Tools |
| OKL3-ER32Z-OFM | Okuma VDI40 Live ER32 Z<Axial>STRT Offset Main ExtCool 4K | 6948.0 | 7.0 | 21.85 | 9.25 | 12.00 | 5.25 | Okuma Live Tools |
| OKLB25-ER40X | Okuma VDI40 Live ER40 X<Radial>90D ExtCool 3K | 8885.0 | 1.0 | 20.75 | 9.25 | 9.25 | 5.75 | Okuma Live Tools |
| OKLT1-ER20Z-M | Okuma VDI30 Live ER20 Z<Axial>90D ExtCooles | 7016.0 | 1.0 | 13.55 | 8.25 | 4.50 | 6.50 | Okuma Live Tools |
| OKLT1-ER20Z-S | Okuma VDI30 Live ER20 Z<Axial>90D ExtCooles | 7016.0 | 1.0 | 13.45 | 4.50 | 8.25 | 6.50 | Okuma Live Tools |
| OKLT2-ER32Z-M | Okuma VDI40 Live ER32 Z<Axial>90D ExtCool | 8095.0 | 4.0 | 19.00 | 5.00 | 10.00 | 7.50 | Okuma Live Tools |
| OKLT-ER25X | Okuma BMT55 Live ER25 X<Radial>STRT ExtCool 6.5K | 3000.0 | 10.0 | 7.00 | 9.45 | 5.12 | 4.13 | Okuma Live Tools |
| PA-SPACER-BT40 | Positioning Stopper Block Spacer B40RA-0025 | 2.0 | 4.0 | 0.35 | 2.00 | 1.32 | 1.25 | Angle Heads |
| PA-SPACER-CAT40 | Positioning Stopper Block Haas Spacer C40RA-0025 | 2.0 | 3.0 | 0.40 | 2.00 | 1.50 | 1.50 | Angle Heads |
| PS-309 | Retention Knob/Pull Stud SK40/IT40 Coolant | 76.0 | 5.0 | 0.18 | 1.18 | 1.18 | 2.56 | Pull Studs |
| PS-SP-E1100-6114508 | Retention Knob/Pull Stud CAT40 Coolant Special | 87.0 | 14.0 | 0.15 | 2.00 | 0.75 | 0.75 | Pull Studs |
| QCC-PB65-PLUNGER-A6 | Plunger for QCC-PB65-A6 OD=95mm | 987.0 | 3.0 | 11.10 | 3.81 | 3.81 | 5.25 | PLUNGER |
| QCC-PB80-A6 | 80 Series Pull Back A2-6 Flat DirectMT w/Blank DrawScrew 5.5K | 4312.0 | 7.0 | 29.60 | 7.50 | 7.50 | 8.50 | QCFC Pull Back Chuck |
| QCFC42-018-SMO | Quick Change Flex Collet 42 Round Smooth 9/32" | 285.0 | 10.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-020-SMO | Quick Change Flex Collet 42 Round Smooth 5/16" | 285.0 | 24.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-022-SER | Quick Change Flex Collet 42 Round Serrated 11/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-022-SMO | Quick Change Flex Collet 42 Round Smooth 11/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-024-SER | Quick Change Flex Collet 42 Round Serrated 3/8" | 285.0 | 9.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-026-SER | Quick Change Flex Collet 42 Round Serrated 13/32" | 285.0 | 4.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-028-SER | Quick Change Flex Collet 42 Round Serrated 7/16" | 285.0 | 15.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-030-SER | Quick Change Flex Collet 42 Round Serrated 15/32" | 285.0 | 4.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-030-SMO | Quick Change Flex Collet 42 Round Smooth 15/32" | 285.0 | 4.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-032-SER | Quick Change Flex Collet 42 Round Serrated 1/2" | 285.0 | 13.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-034-SER | Quick Change Flex Collet 42 Round Serrated 17/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-034-SMO | Quick Change Flex Collet 42 Round Smooth 17/32" | 285.0 | 3.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-036-SER | Quick Change Flex Collet 42 Round Serrated 9/16" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-038-SER | Quick Change Flex Collet 42 Round Serrated 19/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-038-SMO | Quick Change Flex Collet 42 Round Smooth 19/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-040-SER | Quick Change Flex Collet 42 Round Serrated 5/8" | 285.0 | 12.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-042-SER | Quick Change Flex Collet 42 Round Serrated 21/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-044-SER | Quick Change Flex Collet 42 Round Serrated 11/16" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-046-SER | Quick Change Flex Collet 42 Round Serrated 23/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-048-SER | Quick Change Flex Collet 42 Round Serrated 3/4" | 285.0 | 10.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-050-SER | Quick Change Flex Collet 42 Round Serrated 25/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-050-SMO | Quick Change Flex Collet 42 Round Smooth 25/32" | 285.0 | 3.0 | 2.05 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-052-SER | Quick Change Flex Collet 42 Round Serrated 13/16" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-054-SER | Quick Change Flex Collet 42 Round Serrated 27/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-056-SER | Quick Change Flex Collet 42 Round Serrated 7/8" | 285.0 | 15.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-058-SER | Quick Change Flex Collet 42 Round Serrated 29/32" | 285.0 | 4.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-058-SMO | Quick Change Flex Collet 42 Round Smooth 29/32" | 285.0 | 4.0 | 2.05 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-060-SER | Quick Change Flex Collet 42 Round Serrated 15/16" | 285.0 | 4.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-062-SER | Quick Change Flex Collet 42 Round Serrated 31/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-064-SER | Quick Change Flex Collet 42 Round Serrated 1" | 285.0 | 9.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-066-SER | Quick Change Flex Collet 42 Round Serrated 1.1/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-066-SMO | Quick Change Flex Collet 42 Round Smooth 1.1/32" | 285.0 | 4.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-070-SER | Quick Change Flex Collet 42 Round Serrated 1.3/32" | 285.0 | 4.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-070-SMO | Quick Change Flex Collet 42 Round Smooth 1.3/32" | 285.0 | 4.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-072-SER | Quick Change Flex Collet 42 Round Serrated 1.1/8" | 285.0 | 13.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-074-SER | Quick Change Flex Collet 42 Round Serrated 1.5/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-078-SER | Quick Change Flex Collet 42 Round Serrated 1.7/32" | 285.0 | 5.0 | 2.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-082-SER | Quick Change Flex Collet 42 Round Serrated 1.9/32" | 285.0 | 5.0 | 2.05 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-082-SMO | Quick Change Flex Collet 42 Round Smooth 1.9/32" | 285.0 | 4.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-084-SER | Quick Change Flex Collet 42 Round Serrated 1.5/16" | 285.0 | 5.0 | 2.00 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-086-SER | Quick Change Flex Collet 42 Round Serrated 1.11/32" | 285.0 | 5.0 | 1.95 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-086-SMO | Quick Change Flex Collet 42 Round Smooth 1.11/32" | 285.0 | 5.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-088-SER | Quick Change Flex Collet 42 Round Serrated 1.3/8" | 285.0 | 14.0 | 2.00 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-090-SER | Quick Change Flex Collet 42 Round Serrated 1.13/32" | 285.0 | 5.0 | 1.95 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-090-SMO | Quick Change Flex Collet 42 Round Smooth 1.13/32" | 285.0 | 5.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-092-SER | Quick Change Flex Collet 42 Round Serrated 1.7/16" | 285.0 | 5.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-094-SER | Quick Change Flex Collet 42 Round Serrated 1.15/32" | 285.0 | 5.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-094-SMO | Quick Change Flex Collet 42 Round Smooth 1.15/32" | 285.0 | 5.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-096-SER | Quick Change Flex Collet 42 Round Serrated 1.1/2" | 285.0 | 9.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-098-SER | Quick Change Flex Collet 42 Round Serrated 1.17/32" | 285.0 | 5.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-098-SMO | Quick Change Flex Collet 42 Round Smooth 1.17/32" | 285.0 | 5.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-100-SER | Quick Change Flex Collet 42 Round Serrated 1.9/16" | 285.0 | 5.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-102-SER | Quick Change Flex Collet 42 Round Serrated 1.19/32" | 285.0 | 5.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-102-SMO | Quick Change Flex Collet 42 Round Smooth 1.19/32" | 285.0 | 4.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC42-104-SMO | Quick Change Flex Collet 42 Round Smooth 1.5/8" | 285.0 | 7.0 | 1.90 | 4.25 | 4.25 | 3.75 | QC Collet |
| QCFC65-022-SER | Quick Change Flex Collet 65 Round Serrated 11/32" | 351.0 | 5.0 | 4.40 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-026-SER | Quick Change Flex Collet 65 Round Serrated 13/32" | 351.0 | 5.0 | 4.85 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-030-SER | Quick Change Flex Collet 65 Round Serrated 15/32" | 351.0 | 5.0 | 4.80 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-038-SER | Quick Change Flex Collet 65 Round Serrated 19/32" | 351.0 | 5.0 | 4.80 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-042-SER | Quick Change Flex Collet 65 Round Serrated 21/32" | 351.0 | 3.0 | 4.70 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-058-SER | Quick Change Flex Collet 65 Round Serrated 29/32" | 353.0 | 4.0 | 4.10 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-062-SER | Quick Change Flex Collet 65 Round Serrated 31/32" | 353.0 | 5.0 | 4.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-070-SER | Quick Change Flex Collet 65 Round Serrated 1.3/32" | 353.0 | 4.0 | 4.80 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-074-SER | Quick Change Flex Collet 65 Round Serrated 1.5/32" | 353.0 | 5.0 | 4.50 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-078-SER | Quick Change Flex Collet 65 Round Serrated 1.7/32" | 353.0 | 5.0 | 4.10 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-082-SER | Quick Change Flex Collet 65 Round Serrated 1.9/32" | 353.0 | 3.0 | 4.60 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-086-SER | Quick Change Flex Collet 65 Round Serrated 1.11/32" | 353.0 | 4.0 | 4.55 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-094-SER | Quick Change Flex Collet 65 Round Serrated 1.15/32" | 353.0 | 5.0 | 4.35 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-100-SER | Quick Change Flex Collet 65 Round Serrated 1.9/16" | 353.0 | 4.0 | 4.20 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-102-SER | Quick Change Flex Collet 65 Round Serrated 1.19/32" | 353.0 | 4.0 | 4.00 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-106-SER | Quick Change Flex Collet 65 Round Serrated 1.21/32" | 353.0 | 4.0 | 4.00 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-108-SER | Quick Change Flex Collet 65 Round Serrated 1.11/16" | 353.0 | 3.0 | 3.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-110-SER | Quick Change Flex Collet 65 Round Serrated 1.23/32" | 353.0 | 5.0 | 3.90 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-114-SER | Quick Change Flex Collet 65 Round Serrated 1.25/32" | 353.0 | 5.0 | 3.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-118-SER | Quick Change Flex Collet 65 Round Serrated 1.27/32" | 353.0 | 5.0 | 3.75 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-124-SER | Quick Change Flex Collet 65 Round Serrated 1.15/16" | 353.0 | 4.0 | 3.60 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-126-SER | Quick Change Flex Collet 65 Round Serrated 1.31/32" | 353.0 | 4.0 | 3.55 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-132-SER | Quick Change Flex Collet 65 Round Serrated 2.1/16" | 353.0 | 4.0 | 3.65 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-138-SER | Quick Change Flex Collet 65 Round Serrated 2.5/32" | 353.0 | 3.0 | 3.25 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-142-SER | Quick Change Flex Collet 65 Round Serrated 2.7/32" | 353.0 | 14.0 | 3.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-142-SMO | Quick Change Flex Collet 65 Round Smooth 2.7/32" | 353.0 | 11.0 | 3.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-148-SER | Quick Change Flex Collet 65 Round Serrated 2.5/16" | 353.0 | 4.0 | 3.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-150-SER | Quick Change Flex Collet 65 Round Serrated 2.11/32" | 353.0 | 5.0 | 3.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-154-SER | Quick Change Flex Collet 65 Round Serrated 2.13/32" | 353.0 | 5.0 | 3.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-154-SMO | Quick Change Flex Collet 65 Round Smooth 2.13/32" | 353.0 | 4.0 | 3.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-156-SER | Quick Change Flex Collet 65 Round Serrated 2.7/16" | 353.0 | 3.0 | 3.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-158-SER | Quick Change Flex Collet 65 Round Serrated 2.15/32" | 353.0 | 5.0 | 3.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-158-SMO | Quick Change Flex Collet 65 Round Smooth 2.15/32" | 353.0 | 5.0 | 3.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC65-164-SER | Quick Change Flex Collet 65 Round Serrated 2.9/16" | 353.0 | 2.0 | 3.15 | 4.75 | 4.75 | 3.75 | QC Collet |
| QCFC80-048-EMR | Quick Change Flex Collet 80 Round Emergency 3/4" Pilot Hole | 723.0 | 13.0 | 6.00 | 5.50 | 5.50 | 3.75 | QC Collet |
| QCFC80-096-EMR | Quick Change Flex Collet 80 Round Emergency 1.1/2" Pilot Hole | 723.0 | 17.0 | 6.00 | 5.50 | 5.50 | 3.75 | QC Collet |
| QCFC80-160-EMR | Quick Change Flex Collet 80 Round Emergency 2.1/2" Pilot Hole | 723.0 | 16.0 | 5.00 | 5.50 | 5.50 | 3.75 | QC Collet |
| R8007-1000 | R8 TG100 Collet Chuck | 213.0 | 18.0 | 3.40 | 8.25 | 3.63 | 3.63 | TG Collet Chucks |
| RACK-#40/ER16/ER32 | Rack #40/ER16/ER32 | 106.0 | 22.0 | 6.75 | 17.50 | 13.00 | 6.75 | Accessories |
| S.EMAC6110-K01 | eMAC Digital Boring Set(w/o Insert, Base Holder) | 2982.0 | 55.0 | 6.45 | 12.99 | 11.22 | 4.72 | EMAC Boring Bars |
| S/HSK63F-SF0750-75 | HSK63F Shrink Fit Holder 3/4" DrivePins 20K | 166.0 | 3.0 | 2.20 | 8.25 | 3.56 | 3.75 | Shrink Fit Holders |
| S/HSK63F-SF1000-75 | HSK63F Shrink Fit Holder 1" DrivePins 20K | 166.0 | 1.0 | 2.30 | 8.25 | 3.62 | 3.75 | Shrink Fit Holders |
| S20R-2 | Retention Knob/Pull Stud BT20 Alps | 73.0 | 1.0 | 0.10 | 1.25 | 1.25 | 2.62 | Pull Studs |
| S50SF-0250-4.00 | 1/2" Straight Shank EXT Shrink Fit Holder 1/4" | 228.0 | 3.0 | 0.40 | 6.50 | 2.00 | 2.00 | Shrink Fit Holders |
| S50SF-0312-4.00 | 1/2" Straight Shank EXT Shrink Fit Holder 5/16" | 228.0 | 9.0 | 0.40 | 6.50 | 2.00 | 2.00 | Shrink Fit Holders |
| S50SF-8-4.00 | 1/2" Straight Shank EXT Shrink Fit Holder 8mm | 228.0 | 8.0 | 0.40 | 6.50 | 2.12 | 2.00 | Shrink Fit Holders |
| S62SF-3-4.00-3 | 5/8" Straight Shank EXT Shrink Fit Holder 3mm 3dg Slim | 213.0 | 7.0 | 0.30 | 6.50 | 2.00 | 2.00 | Shrink Fit Holders |
| S62SF-5-4.00-3 | 5/8" Straight Shank EXT Shrink Fit Holder 5mm 3dg Slim | 213.0 | 5.0 | 0.30 | 6.50 | 2.12 | 2.00 | Shrink Fit Holders |
| SCM1045CL | Chibimomi Chamfer-Long | 373.0 | 22.0 | 0.10 | 8.00 | 1.00 | 1.00 | Drills |
| SDF-0016-ER11-040M | 16mm Straight Shank EXT Double End ER11 Mini Nut | 270.0 | 8.0 | 0.45 | 6.50 | 2.00 | 2.00 | ER Collet Chucks |
| SDF-0016-ER11-050M | 16mm Straight Shank EXT Double End ER11 Mini Nut | 270.0 | 13.0 | 0.45 | 6.50 | 2.00 | 2.00 | ER Collet Chucks |
| SDF-0020-ER11-030M | 20mm Straight Shank EXT Double End ER11 Mini Nut | 201.0 | 8.0 | 0.30 | 6.50 | 2.00 | 2.00 | ER Collet Chucks |
| SDF-0020-ER16-055M | 20mm Straight Shank EXT Double End ER16 Mini Nut | 266.0 | 5.0 | 0.45 | 6.43 | 2.06 | 2.00 | ER Collet Chucks |
| SDF-0025-ER16-062M | 25mm Straight Shank EXT Double End ER16 Mini Nut | 271.0 | 2.0 | 0.70 | 6.37 | 2.00 | 2.00 | ER Collet Chucks |
| SDF-0625-ER08-015M | 5/8" Straight Shank EXT Double End ER8 Mini Nut | 309.0 | 11.0 | 0.20 | 6.43 | 2.00 | 2.00 | ER Collet Chucks |
| SDF-0625-ER8-025M | Use SDF-0625-ER08-025M ** | 319.0 | 9.0 | 0.25 | 6.32 | 2.12 | 2.00 | ER Collet Chucks |
| SDF-0750-ER11-040M | 3/4" Straight Shank EXT Double End ER11 Mini Nut | 266.0 | 8.0 | 0.30 | 6.50 | 2.00 | 2.00 | ER Collet Chucks |
| SDF-0750-ER11-090M | 3/4" Straight Shank EXT Double End ER11 Mini Nut | 276.0 | 6.0 | 0.55 | 6.50 | 2.00 | 2.00 | ER Collet Chucks |
| SE1-3.15X2.50(S) | #1 PositiveDrive RigidTap Collet .124x.098 3.15X2.50 M3 M4 Slots | 52.0 | 13.0 | 0.20 | 2.25 | 1.50 | 1.50 | Tap Collets |
| SE1-4.5X3.4(S) | #1 PositiveDrive RigidTap Collet .177x.134 4.5X3.4 M4 M6 Slots | 52.0 | 16.0 | 0.20 | 2.25 | 1.50 | 1.50 | Tap Collets |
| SE1-5.5X4.5 | #1 PositiveDrive RigidTap Collet .217x.177 5.5X4.5 M5 M5.5 | 52.0 | 1.0 | 0.20 | 2.25 | 1.50 | 1.50 | Tap Collets |
| SE2-13.0X10.0(S) | #2 PositiveDrive RigidTap Collet .512x.394 13.0X10.0 M17 Slots | 81.0 | 11.0 | 0.70 | 3.00 | 2.00 | 2.00 | Tap Collets |
| SE2-4.0X3.0 | #2 PositiveDrive RigidTap Collet .157x.118 4.0X3.0 M3.5 | 81.0 | 12.0 | 0.70 | 3.00 | 2.00 | 2.00 | Tap Collets |
| SE2-8.0X6.0(S) | #2 PositiveDrive RigidTap Collet .315x.236 8.0X6.0 M11 Slots | 81.0 | 11.0 | 0.70 | 3.00 | 2.00 | 2.00 | Tap Collets |
| SE2-9.5X7.0(S) | #2 PositiveDrive RigidTap Collet .374x.276 9.5X7.0 M13 Slots | 81.0 | 11.0 | 0.70 | 3.00 | 2.00 | 2.00 | Tap Collets |
| SEN1-11.0X9.0 | 11.0X9.0 Length Adjustable PositiveDrive RigidTap Collet M14 | 107.0 | 24.0 | 0.25 | 2.25 | 1.50 | 1.50 | Tap Collets |
| SEN1-8.0X6.0 | #1 TorqueControl Tap Collet .315x.236 8.0X6.0 M11 | 107.0 | 1.0 | 0.45 | 2.25 | 1.50 | 1.50 | Tap Collets |
| SES1-10.5X8.0 | #1 TorqueControl Tap Collet .413x.315 10.5X8.0 M14 M15 | 117.0 | 18.0 | 0.45 | 2.25 | 1.50 | 1.50 | Tap Collets |
| SES1-8.5X6.5 | #1 TorqueControl Tap Collet .335x.256 8.5X6.5 M12 | 117.0 | 9.0 | 0.45 | 2.25 | 1.50 | 1.50 | Tap Collets |
| SF-COIL-0187 | 3/16" SF Spring Clip 5pcs/bag | 22.0 | 18.0 | 0.05 | 2.25 | 2.50 | 0.12 | Accessories |
| SF-COIL-0312 | 5/16" SF Spring Clip 5pcs/bag | 22.0 | 33.0 | 0.05 | 2.50 | 1.00 | 0.12 | Accessories |
| SF-COIL-0625 | 5/8" SF Spring Clip 5pcs/bag | 22.0 | 38.0 | 0.05 | 2.50 | 1.50 | 0.12 | Accessories |
| SF-COIL-1000 | 1" SF Spring Clip 5pcs/bag | 22.0 | 30.0 | 0.05 | 2.50 | 1.37 | 0.12 | Accessories |
| SF-COIL-MM03 | 3mm SF Spring Clip 5pcs/bag | 22.0 | 34.0 | 0.05 | 3.00 | 0.75 | 0.12 | Accessories |
| SF-COIL-MM04 | 4mm SF Spring Clip 5pcs/bag | 22.0 | 38.0 | 0.05 | 2.75 | 0.86 | 0.12 | Accessories |
| SF-COIL-MM05 | 5mm SF Spring Clip 5pcs/bag | 22.0 | 42.0 | 0.05 | 3.00 | 0.62 | 0.12 | Accessories |
| SF-COIL-MM06 | 6mm SF Spring Clip 5pcs/bag | 22.0 | 40.0 | 0.05 | 2.50 | 0.86 | 0.12 | Accessories |
| SF-COIL-MM08 | 8mm SF Spring Clip 5pcs/bag | 22.0 | 42.0 | 0.05 | 2.50 | 1.00 | 0.12 | Accessories |
| SF-COIL-MM10 | SF Spring Coil 10mm, 5pcs/bag | 22.0 | 41.0 | 0.05 | 2.50 | 1.00 | 0.12 | Accessories |
| SF-COIL-MM12 | 12mm SF Spring Clip 5pcs/bag | 22.0 | 41.0 | 0.05 | 2.32 | 1.00 | 0.12 | Accessories |
| SF-COIL-MM16 | 16mm SF Spring Clip 5pcs/bag | 22.0 | 41.0 | 0.05 | 2.32 | 1.25 | 0.12 | Accessories |
| SF-COIL-MM20 | 20mm SF Spring Clip 5pcs/bag | 22.0 | 42.0 | 0.05 | 2.32 | 1.25 | 0.12 | Accessories |
| SF-COIL-MM25 | 25mm SF Spring Clip 5pcs/bag | 22.0 | 42.0 | 0.05 | 2.32 | 1.50 | 0.12 | Accessories |
| SF-PS-UNIT | Shrink Fit: Presetting Unit for Start2, Pot + 9 rods | 2591.0 | 2.0 | 11.20 | 9.00 | 8.00 | 3.00 | Accessories |
| SF-PS-UNIT-ADAPTER-BT40 | Shrink Fit: #40 Adapter for SF-PS-UNIT | 484.0 | 2.0 | 10.55 | 6.00 | 6.00 | 4.00 | Accessories |
| SF-PS-UNIT-ADAPTER-HSK63 | Shrink Fit: HSK63 Adapter for SF-PS-UNIT | 409.0 | 1.0 | 8.55 | 5.25 | 5.25 | 3.50 | Accessories |
| SF-RE010-0500-0125NC | 1/2" Straight Shank EXT Shrink Fit Holder 1/8" | 215.0 | 7.0 | 0.10 | 5.00 | 0.75 | 0.75 | Shrink Fit Holders |
| SF-RE011.12.06.047 | 12mm Straight Shank EXT Shrink Fit Holder 6mm | 156.0 | 2.0 | 0.10 | 2.25 | 0.75 | 0.75 | Shrink Fit Holders |
| SK10-4P | SK10 Slim Chuck Collet 4.0-3.5mm Precision | 103.0 | 6.0 | 0.75 | 2.75 | 1.25 | 1.25 | SK Slim Chuck Collet |
| SK13-1/8A | SK13 Slim Chuck Collet 1/8" On Size | 73.0 | 155.0 | 0.11 | 3.00 | 1.25 | 1.25 | SK Slim Chuck Collet |
| SK13-3/16A | SK13 Slim Chuck Collet 3/16" On Size | 73.0 | 131.0 | 0.11 | 3.00 | 1.25 | 1.25 | SK Slim Chuck Collet |
| SK13-7/16A | SK13 Slim Chuck Collet 7/16" On Size | 73.0 | 17.0 | 0.86 | 3.00 | 1.25 | 1.25 | SK Slim Chuck Collet |
| SK16-3P | SK16 Slim Chuck Collet 3.0-2.75mm Precision | 98.0 | 5.0 | 0.20 | 3.00 | 1.25 | 1.25 | SK Slim Chuck Collet |
| SKL-10-24.0 | Open End Wrench SK10 Slim Chuck 24.0mm | 31.0 | 4.0 | 0.40 | 6.75 | 1.81 | 0.50 | Wrenches |
| S-PROBE-BATT | Metrol Spindle Probe Sensor Repl Battery | 45.0 | 12.0 | 1.00 | 0.00 | 0.00 | 0.00 | Probes |
| S-PROBE-CABLE-10M | Metrol Touch Probe 10M Interface Cable | 478.0 | 5.0 | 1.00 | 0.00 | 0.00 | 0.00 | Probes |
| S-PROBE-CABLE-5M | Metrol Touch Probe 5M Interface Cable | 354.0 | 3.0 | 1.00 | 0.00 | 0.00 | 0.00 | Probes |
| S-PROBE-CASE-FOAM-CAT50L | Foam Insert for Metrol Case CAT50 Long for S-PROBE-CASE-L | 145.0 | 10.0 | 0.10 | 0.00 | 0.00 | 0.00 | Probes |
| S-PROBE-MASTER-RING-GAUGE | Spindle Probe Master Ring Gauge | 731.0 | 3.0 | 3.00 | 0.00 | 0.00 | 0.00 | Probes |
| S-PROBE-RECEIVER-MAGNET | Magnet w/ M6 Countersink Hole | 50.0 | 15.0 | 3.00 | 0.00 | 0.00 | 0.00 | Probes |
| S-PROBE-SENSOR-KIT | Spindle Probe Sensor Kit set | 5489.0 | 2.0 | 1.83 | 6.75 | 11.00 | 7.50 | Probes |
| S-PROBE-STYLUS-R20T-305 | Metrol 2mm Ruby x 30.5mm Stylus | 420.0 | 3.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| S-PROBE-STYLUS-R30T-405 | Metrol 3mm Ruby x 40.5mm Stylus | 381.0 | 3.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| S-PROBE-STYLUS-R40C-905 | Metrol 4mm Ruby x 90.5mm Stylus | 809.0 | 3.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| S-PROBE-STYLUS-R40T-405 | Metrol 4mm Ruby x 40.5mm Stylus | 451.0 | 3.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| S-PROBE-STYLUS-R50T-405 | Metrol 5mm Ruby x 40.5mm Stylus | 600.0 | 5.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| S-PROBE-STYLUS-T10H-155 | Metrol 1mm Tungsten x 15.5mm Stylus | 229.0 | 2.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| S-PROBE-WRENCH-S907 | Hex Allen Wrench Metrol Spindle Probe Stylus | 6.0 | 2.0 | 0.50 | 0.00 | 0.00 | 0.00 | Wrenches |
| SS-0015-ER20-100M | 15mm Straight Shank EXT Single End Round ER20 Mini Nut | 222.0 | 4.0 | 0.55 | 6.43 | 2.06 | 2.06 | ER Collet Chucks |
| SS-0020-ER20-030 | 20mm Straight Shank EXT Single End Round ER20 | 157.0 | 7.0 | 0.50 | 6.37 | 2.00 | 2.00 | ER Collet Chucks |
| SS-0020-ER20-060 | 20mm Straight Shank EXT Single End Round ER20 | 174.0 | 1.0 | 0.60 | 6.43 | 2.06 | 2.00 | ER Collet Chucks |
| SS-0020-ER25-050 | 20mm Straight Shank EXT Single End Round ER25 | 252.0 | 2.0 | 0.90 | 6.50 | 3.00 | 2.75 | ER Collet Chucks |
| SS-0020-ER25-100 | 20mm Straight Shank EXT Single End Round ER25 | 193.0 | 4.0 | 1.05 | 7.50 | 3.00 | 2.75 | ER Collet Chucks |
| SS-0025-ER25-050 | 25mm Straight Shank EXT Single End Round ER25 | 170.0 | 2.0 | 0.90 | 6.50 | 3.00 | 2.75 | ER Collet Chucks |
| SS-0030-ER25-050 | 30mm Straight Shank EXT Single End Round ER25 | 226.0 | 11.0 | 1.00 | 6.50 | 3.12 | 2.75 | ER Collet Chucks |
| SS-0030-ER32-050 | 30mm Straight Shank EXT Single End Round ER32 | 242.0 | 10.0 | 1.30 | 6.50 | 3.00 | 2.75 | ER Collet Chucks |
| SS-0500-ER11-070 | 1/2" Straight Shank EXT Single End Round ER11 | 357.0 | 1.0 | 0.30 | 6.50 | 2.00 | 2.00 | ER Collet Chucks |
| SS-0750-ER16-050 | 3/4" Straight Shank EXT Single End Round ER16 HexNut | 163.0 | 1.0 | 0.45 | 6.25 | 2.00 | 2.00 | ER Collet Chucks |
| ST1-SK10-82 | 1" Straight Shank Ext Slim Chuck SK10 CNC Auto Lathe | 414.0 | 1.0 | 0.77 | 8.50 | 4.50 | 4.00 | SK Slim Chuck Holder |
| ST3/4-SK6-81 | 3/4" Straight Shank Ext Slim Chuck SK6 CNC Auto Lathe | 356.0 | 1.0 | 0.57 | 8.50 | 4.50 | 4.00 | SK Slim Chuck Holder |
| STUDBUDDY-30/35 | Retention Knob Wrench 30/35 Taper | 75.0 | 2.0 | 0.60 | 9.75 | 1.50 | 0.50 | Wrenches |
| STUDBUDDY-50 | Retention Knob Wrench 50 Taper | 91.0 | 15.0 | 1.15 | 9.25 | 1.56 | 1.50 | Wrenches |
| T00297 | Mori BMT Static OD1" X<Radial>STRT ExtCool | 901.0 | 1.0 | 15.27 | 6.31 | 8.25 | 6.75 | Mori Static Tools |
| T15-SPAN | Pin Face Wrench #3 Tap | 121.0 | 2.0 | 0.30 | 6.25 | 1.00 | 0.25 | Wrenches |
| T32335 | Mori BMT Live ER16 X<Radial>STRT ExtCool | 3505.0 | 1.0 | 15.70 | 4.25 | 9.75 | 7.62 | Mori Live Tools |
| TD-1-BRACKET | Tool Setter Mounting Bracket for Metrol TD-1 | 188.0 | 10.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| TD-1-CAP-SCREW | Socket Head Cap Screw 4mm X 20 for TD-1 | 4.0 | 100.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| TD-1-HEX-WRENCH-0.9 | Hex Allen Wrench 0.9mm | 3.0 | 4.0 | 1.00 | 0.00 | 0.00 | 0.00 | Wrenches |
| TD-1-HEX-WRENCH-1.5 | Hex Allen Wrench 1.5mm | 3.0 | 5.0 | 1.00 | 0.00 | 0.00 | 0.00 | Wrenches |
| TD-1-HEX-WRENCH-2.5 | Hex Allen Wrench 2.5mm | 3.0 | 5.0 | 1.00 | 0.00 | 0.00 | 0.00 | Wrenches |
| TD-1-HEX-WRENCH-3.0 | Hex Allen Wrench 3.0mm | 3.0 | 5.0 | 1.00 | 0.00 | 0.00 | 0.00 | Wrenches |
| TD-1-SET-SCREW-M2 | M2 Set Screw (Cone Point) for TD-1 | 4.0 | 17.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| TD-1-SET-SCREW-M3 | M3 Set Screw (Cup Point) for TD-1 | 4.0 | 2980.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| TD-1-SHEAR-PIN-5396D | Tool Setter Replacement Shear Pin Metrol TD-1 | 50.0 | 8.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| TD-1-STYLUS-F4701AS | Tool Setter Replacement Stylus for Metrol TD-1 | 363.0 | 3.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| TD-1-WASHER-4MM-FLAT | Flat Washer 4mm for TD-1 | 3.0 | 100.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| TD-1-WASHER-4MM-LOCK | Lock Washer 4mm for TD-1 | 3.0 | 100.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| TIP07F | Hex Allen Wrench | 24.0 | 3.0 | 0.15 | 3.25 | 0.75 | 0.12 | Wrenches |
| TPC05-22 | FDC-22 #1 Tap Attachment | 138.0 | 1.0 | 1.14 | 4.81 | 2.00 | 2.00 | Accessories |
| TPC05-ER25 | ER25 #1 Tap Attachment | 138.0 | 2.0 | 1.02 | 4.50 | 2.00 | 2.00 | Accessories |
| TPC10-22 | FDC-22 #2 Tap Attachment | 138.0 | 1.0 | 1.92 | 6.25 | 2.32 | 2.32 | Accessories |
| T-SETTER-TD-1 | Metrol Tool Setter TD-1 | 1872.0 | 9.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| T-SETTER-TD-1-15M | Metrol Tool Setter TD-1 w/15m Cable | 3020.0 | 3.0 | 0.50 | 0.00 | 0.00 | 0.00 | Probes |
| VDI40-CO32MX-OHLH | Okuma VDI40 Static CutOff 32mm X<Radial>90D Overhead Left ExtCool | 600.0 | 10.0 | 7.40 | 4.00 | 5.50 | 4.25 | Okuma Static Tools |
| VDI40-ID25MZ-OHC4 | Okuma VDI40 Static ID25mm SQ Z<Axial>STRT Overhead C4 ExtCool | 428.0 | 1.0 | 6.70 | 4.50 | 7.18 | 5.50 | Okuma Static Tools |
| W100 | Spindle Wipe TG100 | 113.0 | 7.0 | 0.40 | 5.75 | 1.75 | 1.75 | Accessories |
| W15R5-1375-5.96 | 1.1/2" Weldon Shank EXT Rigid Tap Holder #3 | 1043.0 | 6.0 | 5.20 | 8.25 | 3.75 | 3.75 | Tap Holders |
| W16 | Spindle Wipe ER16 | 372.0 | 7.0 | 0.40 | 5.75 | 1.25 | 1.25 | Accessories |
| W20 | Spindle Wipe ER20 | 123.0 | 5.0 | 0.25 | 5.82 | 1.75 | 1.75 | Accessories |
| W3 | Spindle Wipe Morse Taper MT3 | 189.0 | 3.0 | 0.35 | 7.50 | 1.12 | 1.12 | Accessories |
| W75 | Spindle Wipe TG75 | 118.0 | 1.0 | 0.30 | 6.00 | 1.25 | 1.25 | Accessories |
| WFB32-ECH10S-37 | WFB32 ER16 Collet Chuck QC | 481.0 | 1.0 | 0.80 | 5.50 | 2.75 | 2.75 | Nakamura |
| WRENCH-MIM-162001 | Star Wrench T30 | 21.0 | 20.0 | 0.06 | 5.00 | 1.25 | 0.25 | Wrenches |
| WS1000-TTC1-2.60 | 1" Weldon Shank EXT Tension/Compression Tap Holder#1 Coolant | 0.0 | 1.0 | 1.35 | 1.75 | 1.75 | 5.25 | Tap Holders |
| ZK24-7/16U | ZK24 TorqueControl Tap Collet .323x.242 8.2x6.1 7/16" | 593.0 | 1.0 | 1.95 | 2.00 | 2.00 | 5.50 | Tap Collets |
| ZK38-1PB | ZK38 TorqueControl Tap Collet PIPE 1.125x.843 28.6x21.4 1P | 491.0 | 5.0 | 4.75 | 3.25 | 4.00 | 5.62 | Tap Collets |